Ubiquiti IsoBeam ISO-BEAM-16 User manual

Isolator Shield for NanoBeam®
Models: ISO-BEAM-16
ISO-BEAM-19
www.4Gon.co.uk [email protected] Tel: [phone] Fax: [phone]

IsoBeam™Compatibility
IsoBeam Compatible NanoBeam Models
ISO-BEAM-16 NBE-M5-16, NBE-5AC-16
ISO-BEAM-19 NBE-M2-13, NBE-M5-19, NBE-5AC-19
Package Contents
IsolatorShield for NanoBeam®
Models:ISO-BEAM-16
ISO-BEAM-19
IsoBeam Shield IsoBeam Ring Quick Start Guide
Installation
1. Align the bubble level and port of the NanoBeam with
the openings of the IsoBeam Shield, and then insert the
NanoBeam into the IsoBeam Shield.
www.4Gon.co.uk [email protected] Tel: [phone] Fax: [phone]

2. Align the tabs of the IsoBeam Ring with the slots of the
IsoBeam Shield. Insert the IsoBeam Ring into the IsoBeam
Shield until the tabs lock into the slots.
3. Insert the ball joint mount into the NanoBeam.
www.4Gon.co.uk [email protected] Tel: [phone] Fax: [phone]

©2016 Ubiquiti Networks, Inc. All rights reserved. Ubiquiti, Ubiquiti Networks,
the Ubiquiti U logo, the Ubiquiti beam logo, IsoBeam, and NanoBeam are
trademarks or registered trademarks of UbiquitiNetworks,Inc. in the United
States and in other countries. All other trademarks are the property of their
respectiveowners. JL030716
*640-00233-02*
640-00233-02
4. Insert the lock ring into the NanoBeam.
5. Turn the lock ring to secure the ball joint mount to the
NanoBeam.
Online Resources
Support support.ubnt.com
Community community.ubnt.com
Downloads downloads.ubnt.com
www.4Gon.co.uk [email protected] Tel: [phone] Fax: [phone]