Ubiquiti UVC-G3 User manual

Camera PoE Adapter (24V, 0.5A) with
Mounting Bracket*
Power Cord*
Cable Gland Screw Anchors (Qty. 2) Self-Tapping Screws (Qty. 2)
Package Contents
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Pole Mount Bracket Machine Screws (Qty. 2)
* Only the single-pack UVC-G3 includes a PoE adapter and power cord.
Installation Requirements
Shielded Category 5 (or above) cabling should be used for all wired Ethernet
connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments
and destructive ESD events with industrial-grade, shielded Ethernet cable from
Ubiquiti. For more details, visit ui.com/toughcable
Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Ethernet Port
Reset Button
Connects to the Ubiquiti PoE adapter for 24V passive PoE power and data.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

To reset to factory defaults, press and hold the Reset button for more than 10
seconds while the camera is powered on.
Hardware Installation
Wall/Ceiling Mount
1.
2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

OR
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

6.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

7.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

8.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

9.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Pole Mount
1.
2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Connecting Power
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

UniFi Protect App
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Launch the UniFi Protect app and follow the on-screen instructions to complete setup.
UniFi Video App
Note: For UniFi Video 3 deployments, there is a UniFi Video mobile app
available for download in the App Store® for iOS devices and Google
Play™ store for Android-based devices.
For details on using the UniFi Video software, refer to the User Guide at:
ui.com/download/unifi‑video
Adjusting the Camera View
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Specifications
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

UVC-G3
Dimensions Ø 75 x 140 mm
(Ø 2.95 x 5.51")
Weight 300 g
(10.58 oz)
Enclosure Injection-Molded Polycarbonate and
Die-Cast Aluminum
Sensor 1/3" 4-Megapixel HDR Sensor
Lens EFL 3.6 mm, f/1.8
Viewing Angle
Before Lens Correction 85° (H), 44.8° (V), 98.1° (D)
After Lens Correction 72° (H), 42.9° (V), 80.4° (D)
Night Mode IR LEDs with Mechanical ICR Filter
Video Compression H.264
Resolution 1080p FHD (1920x1080)
Maximum Frame Rate 30 FPS
Image Settings Brightness, Contrast, Sharpness, Saturation, Noise
Reduction, 50/60 Hz
Processor Specs Ambarella S2L63 (816 MHz ARM Cortex-A9)
Memory Information 512 MB DDR3L
Management Interface UniFi Video v3
Networking Interface (1) 10/100 Ethernet Port
Microphone Yes
Max. Power Consumption 4W
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD