UCI Takeaway Desk User manual

Takeaway Desk Assembly Instructions
Version 1.1 01/04/2020
Design | Manufacture | Deliver
1300 824 824
Australia Wide
www.uci.com.au
Page 1
Carefully Follow these steps to set up your Takeaway Desk
Keep children away during construction and a note that small parts could be a choking hazard
ITEM NO.
A
B
C
IMAGE
WORKTOP
TAKEAWAY DESK LEG
LEG SCREWS
GCODE
N/A
60-01990
32152
QUANTITY
X 1
X 4
X 12
REQUIRED TOOLS:
-Cordless Drill with a Size P2 Phillips Tip or a Size P2 Phillips head Screw Driver.
-Measuring Tape or Ruler.
1. Place worktop (A) upside down on a flat surface and position the first leg (B) in a corner of the worktop as
follows.

Takeaway Desk Assembly Instructions
Version 1.1 01/04/2020
Design | Manufacture | Deliver
1300 824 824
Australia Wide
www.uci.com.au
Page 2
2. Using a P2 Phillips bit, drive a screw (C) through each hole on the leg flange.
3. Repeat steps 1 and 2 for each leg on the desk, making sure the leg positioning is correct and a screw has
been used on every hole.
4. Turn the workstation over and place in your desired location and wipe down all surfaces with a non-abrasive
cleaner. IE Spray & Wipe. If the surface the workstation is sitting on is not level, the feet of each leg can be
levelled by adjusting the glides.
Important Notes:
-Warranty 7 year structural.
We recommend 2 Persons for this process.