Uhppote Hbk-r01 User manual

REMOTE CONTROL SWITCH USER MANUAL Model:HBK-R01

2Home Security CameraThank you for choosing the wireless remote control switch provided by us. Our goal is to provide the best products and service to all of you!PRECAUTION!WARNINGS· For avoidance of damage to the product, do not expose the product to rain or damp.· This product is only for indoor use.· Please use a combination of transmitter and receiver provided by us, we can not guarantee our transmitter or receivers are fully compatible with other manufacture’s products.· The product installation shall be conducted by a professional electrician as it requires specialized knowledge. Incorrect operation may damage the product, or make it inoperable.· The transmitter and receiver have been paired with each other in factory· Keep this product away from children under 3 years old to prevent ingestion.· Install the receiver in a place out of touch of children, so as to prevent electric shock.· Please do not put the battery in water, ﬁre or moisture places foravoidance of explosion.· The battery contains hazardous substance. Return the waste batteries to the recycling bin to avoid contamination to the environment.For avoidance of damage to the product or injury to the people, please carefully read this manual before use and keep it for future reference.

Home Security Camera· Specialized for the access control system and unable to be applied to other ﬁelds.· The number of the remotes which can be connected to one receiver· 0/5/10 seconds locking delay time is adjustable, and default is 5 seconds. · Toggle switch makes it more convenient to choose your desired operating mode (Toggle, Latched and Momentary).· Support connecting external access keypad and 12VDC active buzzer (Note: Access keypad and buzzer are not included.)· Built-in diode, real-time protecting relay, door lock and buzzer, prolonging the service life.MAIN FEATURESSPECIFICATIONSReceiver:· Operating Voltage: 12VDC · Frequency: 433MHz· Operating Current: 20mA · Operating Temperature: -30~75℃· RF Channels: One · DC Encoding Type: Learning code· Number of Remotes can be connected to one Receiver: ≤40· Receiving Range: 50 meters in open space· Built-in DC power connector for easy wiring· Operating Mode: Momentary / Toggled / LatchedTransmitter: · Operating Current: 10mA · Case Material: Plastic· Operating Voltage: 6VDC (Built-in button battery)· Powered by: 2pcs CR2016/3V batteries · Transmitting Frequency: 433MHz3

RelayEXIT BUTTONPWR

BUZZER-

+4MAIN COMPONENTSComponentsManufacturerMCUSTM8S003F3Linear RegulatorSPX117-3.3RF Transceiver ChipSYN500R SYNOXOSTSIPEXRelayG5QOMRONOPERATING SETTINGS10 5 0RelayRF-KEYTLMEXIT BUTTON32141. Lock Mode SelectNO: Fail-Secure Lock NC: Fail-Safe Lock2. Operating Mode SelectT: ToggleL: LatchedM: Momentary3.T ime Delay SelectSupport 0/5/10 seconds locking delay time, default is 5 seconds.4.T ransmitter ParingPress the RF-KEY on the receiver once, and the indicator on it will ﬂash green once. Then press the button on the transmitter within 20 seconds, the LED indicator on the receiver will ﬂash green three times to indicate the paring is successful.5.C lear CodePress and hold the RF-KEY for 8 seconds until the indicator changes from green to red.4PWR

BUZZER-

-++NCLOCKCOMNO10 5 0RF-KEYTLMLOCKCOMNO-+NCNONOModel

10 5 0RelayRF-KEYTLMCOMEXIT BUTTONPWR

BUZZER-

-++NCLOCKNONORelayPWR

BUZZER-

+TLM10 5 0RF-KEYCOMEXIT BUTTONLOCKNONCNOWIRING DIAGRAM+V+V-PUSH TOEXIT1. When connect Fail-Secure Lock2. When connect Fail-Safe LockV+V-PUSH TOEXITNOCOMNC5-+V+V-COMNOV+V-COMNO

WIRING DEMONSTRATION DIAGRAM1. When connect Fail-Secure Lock

Note: Exit button, access keypad, buzzer, lock and power adapter are only for demonstration purpose, which are not included.Fail-Secure Lock

V+V-NOCOMSwitch to "NO"

WIRING DEMONSTRATION DIAGRAM2. When connect Fail-Safe Lock

Fail-Safe LockNote: Exit button, access keypad, buzzer, lock and power adapter are only for demonstration purpose, which are not included.

V+V-NOCOMSwitch to "NC"

8TROUBLE SHOOTING1. Q: Why does not the transmitter's LED light up when I press the button on it ?A: The battery power may be exhausted. Please replace the battery.2. Q: Why can't the lock be unlocked after pressing the transmitter? A: Please check the issue by the following steps:a. Check whether the remote control receiver and transmitter are paired successfully.b. Check whether there is any metal object around the remote control receiver as it may shield the signal.3. Q: Why can't the lock work properly when the wiring is correct? A: Please check whether the indicator of the receiver is on and the mode of lock is selected correctly. (For more details, please refer to "Lock Mode Select" in this manual.)This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.฀Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.฀FCC WARNING

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.฀If this equipment does cause harmful interference to radio or television reception,฀which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:฀-- Reorient or relocate the receiving antenna.฀-- Increase the separation between the equipment and receiver.฀-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.฀-- Consult the dealer or an experienced radio/TV technician for help.฀9