UIC MSR240U Series Specification sheet

MSR240U Simple Manual UDN PM041-USB-S
MSR240U SERIES
Manual Insert Magnetic Card Reader
USB Interface
Thank you for purchasing the MSR240U series products.
The MSR240U Manual Insert Magnetic Card Reader USB interface is ideal for retail systems, time keeping
systems, security systems and other card reader related systems. The MSR240U series are designed to offer
the user a card reader solution that will complement many applications.
FEATURES
 Light weight: Approx. 50g
 Compact size: 78L*60W*26H (mm)
 Low power consumption.
 No extra power supply is needed.
CONFIGURATION
 MSR240U-02 track 2 only
 MSR240U-12 track 1&2
 MSR240U-23 track 2&3
Note: Optional configuration is available.
AGENCY APPROVAL
 Specification for FCC Class B
 Specification for CE Class B
 Specification for BSMI Class B
WARRANTY
This product is served under one-year warranty to the original purchaser. Within the warranty period, merchandise found to defective
will be repaired or replaced. This warranty applies to the products only under the normal use of the original purchaser, and in no
circumstances covers incidental or consequential damages though consumers’ misuse or modification of the products.
This product is served under one-year warranty to the original purchaser. Within the warranty period, merchandise found to be
defective would be repaired or replaced. This warranty applies to the products only under the normal use of the original purchasers,
and in no circumstances covers incidental or consequential damages through users’ misuse or modification of the products.
SETUP
1. Power off your PC system.
2. Connect USB type A connector of MSR240U cable to a free USB port.
3. Power on your PC system.
4. Normally, windows system prompts “driver request” message for the first time install.
5. After successful installed the driver, MSR240U can communicate with PC via a virtual COM port.
March 28, 2005 1

MSR240U Simple Manual UDN PM041-USB-S
SPECIFICATIONS USBCONNECTORASSIGNMENT
Contact Number Signal Name Typical Wiring Assignment
1 Vbus Red
2 D- White
3 D+ Green
4 GND Black
Shell Shield Drain Wire
Electrical
Power Requirements +5.0VDC
Interface USB Type A connector
Agency Approval FCC/CE Class B; BSMI Class B
Mechanical
Body Material ABS+10%GF
Dimensions 78L ×60W ×26Hmm
Weight Approx. 50g
Card Handling Method Manual insert
Environment
Operation Temperature: -10°C ~ 50°C
Humidity: 15% to 90% (non condensing)
Storage Temperature: -30°C ~ 70°C
Humidity: 10% to 90% (non condensing)
Performance
Card Type Magnetic card as per ISO7811
Standard card Jitter±15% Amp.60%
Swipe Speed 4 ~ 40 ips 5 ~ 35 ips 5 ~ 35 ips
Card Media Read 300 ~ 4000 oe magnetic stripe
Magnetic Head Life 500K Min.
OUTPUT DATA FORMAT
Single track <SS>< TRACK 1or 2or 3 DATA ><ES>
<SS>< TRACK 1 or TRACK 2 DATA ><ES>
Dual track <SS>< TRACK 2 or TRACK 3 DATA ><ES>
Triple track <SS>< TRACK 1 DATA ><ES><SS>< TRACK 2 DATA ><ES><SS>< TRACK 3 DATA ><ES>
Remarks:
SS = START SENTINEL
TRACK1= “%” TRACK2= “;” TRACK3= “;”
ES = END SENTINEL
TRACK1, 2 & 3= “?”
Note:
1. If read error, the default output data format is <STX><SS>E<ES><ETX> and it can be replaced as either
<STX><SS>F<ES><ETX> or output nothing.
2. If no data is read, then display <STX><SS>N<ES><ETX> as default and it can be replaced as output nothing.
3. <STX>, <ETX>, <DLE>, SS (start sentinel), ES (end sentinel) and LRC are optional.
The <DLE> is programmable by command setting.
4. The SS, ES or LRC are optional for each track.
March 28, 2005 2