Ultra-Pure 988 User manual

Owner’s Manual
Please carefully read this instruction manual and make
certain you fully understand all the operating instructions
and safety warnings so you can operate the product
correctly and safely.
Warning Attention
Warnings remind users that
mishandling or misuse of this
product may result in serious
injury or death.
Attention notes items of
importance about the
specifications, function,
or operation of the product.
ATTENTION
ATTENTION
If your appliance fails to function
correctly, unplug it for two minutes.
This will reset the units functions
to factory specifications.
Do not change the length
of wire by yourself.
FORCEFORCE
Do not use the unit around flammable
liquids or gases.
FORCE
Do not use the unit in areas of high
temperature. FORCE
Please unplug the unit from the
electric source if not using for a
long period of time.
Note: this unit WILL NOT remove
any carbon monoxide that may be
present.in the air.
Carbon Monoxide is a deadly gas!
FORCE
Do not clean the unit with corrosives.
Turn off the unit and unplug it before
cleaning.
FORCE
Turnoffthepowerbefore unplugging
the unit from the socket.
FORCE
FORCE
Do not use the unit around explosive
liquids or gases. ATTENTION
Do not use in a sealed or unventilated
room. The units is not a ventilator.
We reserve the right to change
product specifications at any
time without notification to the
consumer.
ATTENTION
WARNING
FORCE
Do not insert
any metal
objects into
this appliance!
FORCE
All repairs and
servicing must
be performed by
authorized service
technicians.
FORCE
This unit is
rated for
120v/60Hz
only!
FORCE
Do not place
this unit in
water or
any other
liquid!
FORBID
Do not repair this
unit by yourself.
Frayed wires may cause
electric shock or fire.
FORBID
Do not block air
intakes or exhausts.
Operating this unit with blocked
air intakes or exhaust will result
reduced efficiency of this unit and
may cause it to over heat.
FORBID
Do not allow
children to
operate this
appliance.
FORCE
Use caution
when plugging
and unplugging
this appliance.
Do not pull the plug by
its wire!
Cautions
Warranty
 Ultra-Pure warrants this product to be free from manufacturing
and material defects (excluding filters, lights, and batteries) for
a period of one year from the original date of purchase.
 This warranty is valid to the only original owner with a proof of purchase.
 Product abuse, misuse, modification, alteration, or opening of the air
purifier housing will void the warranty.
CAUTION:
NEVER IMMERSETHE APPLIANCE,CORD SET
OR PLUG INWATER OR ANY OTHER LIQUID.
1) The UV lights have a working life of more than 5000 hours.
2)Always turn the power off and unplug the unit before replacing
the UV light.
1) The HEPAfilter set may last up to 1 year based on 8 hours working
a day in a normal household environment.
2) Always turn the power off before replacing any filters.
3) Do not clean the HEPAfilter with water.
4) Always remove the plastic packaging on the filters before using.
UV Light Information
HEPA Filter Information
Technical Information
Care and Cleaning
1) Always disconnect the power cord before cleaning.
2) Wipe the enclosure, control panel, and cord with a damp cloth or sponge.
3) The intake grille can be removed and hand washed in warm, soapy water.
4) The washable pre-filer can be hand washed in warm soapy water. Air
dry the pre-filter before re-installing in the unit.
5) DO NOT wash the HEPA, Activated Carbon, or TiO2 filters.
6) The outlet grille should simply be dusted - do not immerse in water.
7) Do not use harsh abrasives or caustic cleaners on any part of the unit.
8) CAUTION: NEVER immerse the appliance, cord or plug in water or
any other liquid.
9) If the cord is damaged, the manufacturer or its service agent or similarly
qualified persons must replace it in order to avoid personal injury.

Operating Instructions
Congratulations on your purchase of the Ultra-Pure™ 988 Air Purifier.
This multi technology air purifier will greatly assist you in cleaning the
air in your home or office. It has been designed to significantly improve
the environment in which you locate this device.
Functions and Features
Dual 5-Stage Filtration & Purification

Ultra quiet 3-speed fan for effective air cleansing in all indoor household or
office environments.

3-Stage automatic air quality sensor to continuously monitor surrounding
air and adjust the 988’s operation to assure maximum air purification.

On-demand (On-Off) ozone generation to help oxidize odors, bacteria, mold,
chemicals and other pollutants in the air. Maximum Ozone production
is 0.004ppm (20% below US EPA maximums).

Anion continuous negative ion generation to help precipitate smog, pollen
and dust from the air. >5 x 10 /cm.

Dual 5-Stage filtration and purification system features:
1. Dual washable pre-filters to remove larger airborne particulate.
2. Dual hi-performance HEPA filters to remove dust and pollen.
Very helpful for those suffering from asthma and various allergies.
3. Dual activated Carbon filters to help remove gases, smoke, odors,
and hazardous chemical fumes.
4. Dual photo catalyst Nano-TiO2 germicidal sanitizers to help suppress
the growth of microorganisms including mold, viruses, and bacteria.
5. Dual UVGI or Ultraviolet Germicidal Irradiation lights for killing mold,
germs, bacteria, viruses, and removing odors.

Easy to read LCD control panel.

5-Mode automatic timing:
1. Automatic On-Off with air quality sensor.
2. Manual on-off for continuous operation.
3. Auto for continuous 20 minutes on – 40 minutes off operation.
4. 2-Hour for 2 hours continuous on then automatic turn-off.
5. 4-Hour for 4 hours continuous on then automatic turn-off.

Wireless remote control included.
1
3 24 5
1 3
2 5
1. Washable pre-filter
2. Hi-performance HEPAfilter
3.Activated Carbon filter
4. Photo catalyst UVGI
(Ultra Violet Germicidal Irradiation)
5. Nano TiO2 germicidal sanitizer
1 2 3 4
Unpacking and Installation
Your Ultra-Pure 988 air purifier has been carefully packaged so that you
receive it in perfect condition. Please read and very carefully follow all the
instructions below BEFORE you plug in the unit.
 Place remote on its back. Carefully open the remote control battery housing
located on the bottom.
 Place the, included, lithium (CR02025-3v) battery onto the clip.
NOTE; the battery only fits one-way. Be sure that inner battery lip
(smaller edge) properly fits into the battery housing. Slide the battery
and the clip back into place. DO NOT FORCE the battery clip into place.
Remote Control Battery Installation
Properly locating your Ultra-Pure 988
Your air purifier will function adequately almost anywhere you place it.
However you may improve its air cleaning, and purifying efficiency by following
these suggestions.
 Place it on a table, or on a high shelf (circulated air tends to rise).
 Try to avoid placing it in the corner of a room.
 Avoid placing it behind furniture.
 Be sure that the intake air vents are not blocked or restricted.
Remember, the idea is to place your Ultra-Pure Air purifier in a location that
will be best for it to clean and purifier as much of the air within a room as
possible. Following the above guidelines will help achieve your clean air goals.
Filter Installation and Replacement
1. Carefully remove the unit from the box.
2. Facing the front of the unit, remove the right side air intake grill by placing
your index finger under the grill and pulling away the filter grill.
3. Now remove the HEPA filter from the side air intake.
4. If the HEPA filter has a protective plastic covering, remove it.
5. If the TiO2 filter has a protective plastic covering, remove it.
5. Re-install both the HEPA and TiO2 filters into their proper place. Be sure to gently
push the filter all the way into its housing.
6. Re-install the side air intake grill. Make sure that it properly snaps into place.
7. Repeat the same procedure for the left side air intake and filters.
1
2
3 4
UV Light Installation and Replacement
42
1 3
1. Unplug the unit.
2. Remove the air intake grill, HEPA, and TiO2 filters per the instructions above.
3. To remove the UV bulb: carefully rotate the lamp 90 degrees and gently slide
the electrodes out of the light socket.
4. To install the UV bulb: carefully insert the lamp electrodes into the light socket
and rotate the lamp 90 degrees. The lamp should be held securely
inplace by slight indentations.
5. Re-install the TiO2 & HEPA filters and air intake grill per the instruction above.
6. Plug in the unit and resume use.
4
1
2
3
Now you are ready to operate your
 Plug power cord into 110v/60Hz wall socket,
 LCD display will light for 10 seconds and
then turn off.
1) Plug in power cord
 Press the POWER button and unit starts
operating and the LCD displays function.
2) Press Power Button
 Press the UV Light button to turn the UV light ON or OFF.
 Turning the UV light off also turns off the TiO2 sanitizer.
5) UV light
 Press the FUNCTION button switch to selectANION or OZONE function.
 ANION: On this setting the unit produces negative ions which help clean
and remove dust, pollen, smog and smoke from the air. Aperfect technology
to help people who suffer from asthma and allergies.
 OZONE: The Ozone setting enables the production of hydroxyl radicals
which help rid your room of bacteria, mold, chemicals and other pollutants,
as well as smoke. Use this setting ONLY when you need to rid your room of
the above concerns.
 If the OZONE is turned on it will automatically switch toANION after 2 hours.
In “Auto” mode the OZONE automatically switch toANION at the end of the
first 20 minute on cycle.
4) Function Button
3) Mode Button
 Press the Mode button to get the setting you desire.
1. “Manual” on-off for continuous operation.
2. “Auto” for continuous 20 minutes on – 40 minutes off operation.
3. “2Hours” for 2 hours continuous on then automatic turn-off.
4. “4Hours” for 4 hours continuous on then automatic turn-off.
6) Fan Speeds Settings
 You can set fan speeds by either repeatedly pushing the speed button on the
air cleaner or by pushing the speed button on the remote control. Repeatedly
push the speed button until it sets the desired speed.
LOW - use for quiet, nighttime operation or for constant low-speed filtration.
MEDIUM - provides a higher fan speed; use to quickly filter dust, pollen,
smoke, etc. from a room
HIGH – provides the fastest possible way in which to clean the air in your room.
9) Memory
 This unit has a memory. As long as the unit remains plugged in it will maintain settings.
 If this unit is unplugged,or has a power failure, it will return automatically to factory pre-sets.
 Press theAIR SENSOR button to turn on theAutomaticAir-Sensor function. The air
sensor function will monitor the surrounding air quality and automatically adjust the
fan speed to assure the best quality air possible. TheAir Sensor will not adjust the
UV or Ozone functions. It takes 1-3 minutes for theAir Sensor to begin working.
 There are 3 indicators at the bottom of the LED panel that show theAir Sensor is
operating and the quality of the air.
 When the air quality is good, the unit will turn-off automatically. The unit will
automatically turn-on when the surrounding air needs purified.
7) Automatic Air-Sensor Setting
Air-Sensor Indicators Good Air Quality Slightly Polluted More Polluted Most Polluted
u Most functions of the Ultra-Pure 988 can be controlled
by the remote control included with this unit.
8) Remote Control
UV LIGHT
UV LIGHT
AIR
AIR
SENSOR
SENSOR
AIR PURFIER
LCD display showing all functions.

Operating Instructions
Congratulations on your purchase of the Ultra-Pure™ 988 Air Purifier.
This multi technology air purifier will greatly assist you in cleaning the
air in your home or office. It has been designed to significantly improve
the environment in which you locate this device.
Functions and Features
Dual 5-Stage Filtration & Purification
 Ultra quiet 3-speed fan for effective air cleansing in all indoor household or
office environments.
 3-Stage automatic air quality sensor to continuously monitor surrounding
air and adjust the 988’s operation to assure maximum air purification.
 On-demand (On-Off) ozone generation to help oxidize odors, bacteria, mold,
chemicals and other pollutants in the air. Maximum Ozone production
is 0.004ppm (20% below US EPA maximums).
 Anion continuous negative ion generation to help precipitate smog, pollen
and dust from the air. >5 x 10 /cm.
 Dual 5-Stage filtration and purification system features:
1. Dual washable pre-filters to remove larger airborne particulate.
2. Dual hi-performance HEPA filters to remove dust and pollen.
Very helpful for those suffering from asthma and various allergies.
3. Dual activated Carbon filters to help remove gases, smoke, odors,
and hazardous chemical fumes.
4. Dual photo catalyst Nano-TiO2 germicidal sanitizers to help suppress
the growth of microorganisms including mold, viruses, and bacteria.
5. Dual UVGI or Ultraviolet Germicidal Irradiation lights for killing mold,
germs, bacteria, viruses, and removing odors.
 Easy to read LCD control panel.
 5-Mode automatic timing:
1. Automatic On-Off with air quality sensor.
2. Manual on-off for continuous operation.
3. Auto for continuous 20 minutes on – 40 minutes off operation.
4. 2-Hour for 2 hours continuous on then automatic turn-off.
5. 4-Hour for 4 hours continuous on then automatic turn-off.
 Wireless remote control included.
1
3 24 5
1 3
2 5
1. Washable pre-filter
2. Hi-performance HEPA filter
3.Activated Carbon filter
4. Photo catalyst UVGI
(Ultra Violet Germicidal Irradiation)
5. Nano TiO2 germicidal sanitizer
1 2 3 4
Unpacking and Installation
Your Ultra-Pure 988 air purifier has been carefully packaged so that you
receive it in perfect condition. Please read and very carefully follow all the
instructions below BEFORE you plug in the unit.
 Place remote on its back. Carefully open the remote control battery housing
located on the bottom.
 Place the, included, lithium (CR02025-3v) battery onto the clip.
NOTE; the battery only fits one-way. Be sure that inner battery lip
(smaller edge) properly fits into the battery housing. Slide the battery
and the clip back into place. DO NOT FORCE the battery clip into place.
Remote Control Battery Installation
Properly locating your Ultra-Pure 988
Your air purifier will function adequately almost anywhere you place it.
However you may improve its air cleaning, and purifying efficiency by following
these suggestions.
 Place it on a table, or on a high shelf (circulated air tends to rise).
 Try to avoid placing it in the corner of a room.
 Avoid placing it behind furniture.
 Be sure that the intake air vents are not blocked or restricted.
Remember, the idea is to place your Ultra-Pure Air purifier in a location that
will be best for it to clean and purifier as much of the air within a room as
possible. Following the above guidelines will help achieve your clean air goals.
Filter Installation and Replacement
1. Carefully remove the unit from the box.
2. Facing the front of the unit, remove the right side air intake grill by placing
your index finger under the grill and pulling away the filter grill.
3. Now remove the HEPA filter from the side air intake.
4. If the HEPA filter has a protective plastic covering, remove it.
5. If the TiO2 filter has a protective plastic covering, remove it.
5. Re-install both the HEPA and TiO2 filters into their proper place. Be sure to gently
push the filter all the way into its housing.
6. Re-install the side air intake grill. Make sure that it properly snaps into place.
7. Repeat the same procedure for the left side air intake and filters.
1
2
3 4
UV Light Installation and Replacement
42
1 3
1. Unplug the unit.
2. Remove the air intake grill, HEPA, and TiO2 filters per the instructions above.
3. To remove the UV bulb: carefully rotate the lamp 90 degrees and gently slide
the electrodes out of the light socket.
4. To install the UV bulb: carefully insert the lamp electrodes into the light socket
and rotate the lamp 90 degrees. The lamp should be held securely
inplace by slight indentations.
5. Re-install the TiO2 & HEPA filters and air intake grill per the instruction above.
6. Plug in the unit and resume use.
4
1
2
3
Now you are ready to operate your
 Plug power cord into 110v/60Hz wall socket,
 LCD display will light for 10 seconds and
then turn off.
1) Plug in power cord
 Press the POWER button and unit starts
operating and the LCD displays function.
2) Press Power Button
 Press the UV Light button to turn the UV light ON or OFF.
 Turning the UV light off also turns off the TiO2 sanitizer.
5) UV light
 Press the FUNCTION button switch to selectANION or OZONE function.
 ANION: On this setting the unit produces negative ions which help clean
and remove dust, pollen, smog and smoke from the air. Aperfect technology
to help people who suffer from asthma and allergies.
 OZONE: The Ozone setting enables the production of hydroxyl radicals
which help rid your room of bacteria, mold, chemicals and other pollutants,
as well as smoke. Use this setting ONLY when you need to rid your room of
the above concerns.
 If the OZONE is turned on it will automatically switch toANION after 2 hours.
In “Auto” mode the OZONE automatically switch toANION at the end of the
first 20 minute on cycle.
4) Function Button
3) Mode Button
 Press the Mode button to get the setting you desire.
1. “Manual” on-off for continuous operation.
2. “Auto” for continuous 20 minutes on – 40 minutes off operation.
3. “2Hours” for 2 hours continuous on then automatic turn-off.
4. “4Hours” for 4 hours continuous on then automatic turn-off.
6) Fan Speeds Settings
 You can set fan speeds by either repeatedly pushing the speed button on the
air cleaner or by pushing the speed button on the remote control. Repeatedly
push the speed button until it sets the desired speed.
LOW - use for quiet, nighttime operation or for constant low-speed filtration.
MEDIUM - provides a higher fan speed; use to quickly filter dust, pollen,
smoke, etc. from a room
HIGH – provides the fastest possible way in which to clean the air in your room.
9) Memory
 This unit has a memory. As long as the unit remains plugged in it will maintain settings.
 If this unit is unplugged,or has a power failure, it will return automatically to factory pre-sets.
 Press theAIR SENSOR button to turn on theAutomaticAir-Sensor function. The air
sensor function will monitor the surrounding air quality and automatically adjust the
fan speed to assure the best quality air possible. TheAir Sensor will not adjust the
UV or Ozone functions. It takes 1-3 minutes for theAir Sensor to begin working.
 There are 3 indicators at the bottom of the LED panel that show theAir Sensor is
operating and the quality of the air.
 When the air quality is good, the unit will turn-off automatically. The unit will
automatically turn-on when the surrounding air needs purified.
7) Automatic Air-Sensor Setting
Air-Sensor Indicators Good Air Quality Slightly Polluted More Polluted Most Polluted
u Most functions of the Ultra-Pure 988 can be controlled
by the remote control included with this unit.
8) Remote Control
UV LIGHTUV LIGHT
AIRAIR
SENSORSENSOR
AIR PURFIER
LCD display showing all functions.

Operating Instructions
Congratulations on your purchase of the Ultra-Pure™ 988 Air Purifier.
This multi technology air purifier will greatly assist you in cleaning the
air in your home or office. It has been designed to significantly improve
the environment in which you locate this device.
Functions and Features
Dual 5-Stage Filtration & Purification
 Ultra quiet 3-speed fan for effective air cleansing in all indoor household or
office environments.
 3-Stage automatic air quality sensor to continuously monitor surrounding
air and adjust the 988’s operation to assure maximum air purification.
 On-demand (On-Off) ozone generation to help oxidize odors, bacteria, mold,
chemicals and other pollutants in the air. Maximum Ozone production
is 0.004ppm (20% below US EPA maximums).
 Anion continuous negative ion generation to help precipitate smog, pollen
and dust from the air. >5 x 10 /cm.
 Dual 5-Stage filtration and purification system features:
1. Dual washable pre-filters to remove larger airborne particulate.
2. Dual hi-performance HEPA filters to remove dust and pollen.
Very helpful for those suffering from asthma and various allergies.
3. Dual activated Carbon filters to help remove gases, smoke, odors,
and hazardous chemical fumes.
4. Dual photo catalyst Nano-TiO2 germicidal sanitizers to help suppress
the growth of microorganisms including mold, viruses, and bacteria.
5. Dual UVGI or Ultraviolet Germicidal Irradiation lights for killing mold,
germs, bacteria, viruses, and removing odors.
 Easy to read LCD control panel.
 5-Mode automatic timing:
1. Automatic On-Off with air quality sensor.
2. Manual on-off for continuous operation.
3. Auto for continuous 20 minutes on – 40 minutes off operation.
4. 2-Hour for 2 hours continuous on then automatic turn-off.
5. 4-Hour for 4 hours continuous on then automatic turn-off.
 Wireless remote control included.
1
3 24 5
1 3
2 5
1. Washable pre-filter
2. Hi-performance HEPA filter
3.Activated Carbon filter
4. Photo catalyst UVGI
(Ultra Violet Germicidal Irradiation)
5. Nano TiO2 germicidal sanitizer
1 2 3 4
Unpacking and Installation
Your Ultra-Pure 988 air purifier has been carefully packaged so that you
receive it in perfect condition. Please read and very carefully follow all the
instructions below BEFORE you plug in the unit.
 Place remote on its back. Carefully open the remote control battery housing
located on the bottom.
 Place the, included, lithium (CR02025-3v) battery onto the clip.
NOTE; the battery only fits one-way. Be sure that inner battery lip
(smaller edge) properly fits into the battery housing. Slide the battery
and the clip back into place. DO NOT FORCE the battery clip into place.
Remote Control Battery Installation
Properly locating your Ultra-Pure 988
Your air purifier will function adequately almost anywhere you place it.
However you may improve its air cleaning, and purifying efficiency by following
these suggestions.
 Place it on a table, or on a high shelf (circulated air tends to rise).
 Try to avoid placing it in the corner of a room.
 Avoid placing it behind furniture.
 Be sure that the intake air vents are not blocked or restricted.
Remember, the idea is to place your Ultra-Pure Air purifier in a location that
will be best for it to clean and purifier as much of the air within a room as
possible. Following the above guidelines will help achieve your clean air goals.
Filter Installation and Replacement
1. Carefully remove the unit from the box.
2. Facing the front of the unit, remove the right side air intake grill by placing
your index finger under the grill and pulling away the filter grill.
3. Now remove the HEPA filter from the side air intake.
4. If the HEPA filter has a protective plastic covering, remove it.
5. If the TiO2 filter has a protective plastic covering, remove it.
5. Re-install both the HEPA and TiO2 filters into their proper place. Be sure to gently
push the filter all the way into its housing.
6. Re-install the side air intake grill. Make sure that it properly snaps into place.
7. Repeat the same procedure for the left side air intake and filters.
1
2
3 4
UV Light Installation and Replacement
42
1 3
1. Unplug the unit.
2. Remove the air intake grill, HEPA, and TiO2 filters per the instructions above.
3. To remove the UV bulb: carefully rotate the lamp 90 degrees and gently slide
the electrodes out of the light socket.
4. To install the UV bulb: carefully insert the lamp electrodes into the light socket
and rotate the lamp 90 degrees. The lamp should be held securely
inplace by slight indentations.
5. Re-install the TiO2 & HEPA filters and air intake grill per the instruction above.
6. Plug in the unit and resume use.
4
1
2
3
Now you are ready to operate your
 Plug power cord into 110v/60Hz wall socket,
 LCD display will light for 10 seconds and
then turn off.
1) Plug in power cord
 Press the POWER button and unit starts
operating and the LCD displays function.
2) Press Power Button
 Press the UV Light button to turn the UV light ON or OFF.
 Turning the UV light off also turns off the TiO2 sanitizer.
5) UV light
 Press the FUNCTION button switch to selectANION or OZONE function.
 ANION: On this setting the unit produces negative ions which help clean
and remove dust, pollen, smog and smoke from the air. Aperfect technology
to help people who suffer from asthma and allergies.
 OZONE: The Ozone setting enables the production of hydroxyl radicals
which help rid your room of bacteria, mold, chemicals and other pollutants,
as well as smoke. Use this setting ONLY when you need to rid your room of
the above concerns.
 If the OZONE is turned on it will automatically switch toANION after 2 hours.
In “Auto” mode the OZONE automatically switch toANION at the end of the
first 20 minute on cycle.
4) Function Button
3) Mode Button
 Press the Mode button to get the setting you desire.
1. “Manual” on-off for continuous operation.
2. “Auto” for continuous 20 minutes on – 40 minutes off operation.
3. “2Hours” for 2 hours continuous on then automatic turn-off.
4. “4Hours” for 4 hours continuous on then automatic turn-off.
6) Fan Speeds Settings
 You can set fan speeds by either repeatedly pushing the speed button on the
air cleaner or by pushing the speed button on the remote control. Repeatedly
push the speed button until it sets the desired speed.
LOW - use for quiet, nighttime operation or for constant low-speed filtration.
MEDIUM - provides a higher fan speed; use to quickly filter dust, pollen,
smoke, etc. from a room
HIGH – provides the fastest possible way in which to clean the air in your room.
9) Memory
 This unit has a memory. As long as the unit remains plugged in it will maintain settings.
 If this unit is unplugged,or has a power failure, it will return automatically to factory pre-sets.
 Press theAIR SENSOR button to turn on theAutomaticAir-Sensor function. The air
sensor function will monitor the surrounding air quality and automatically adjust the
fan speed to assure the best quality air possible. TheAir Sensor will not adjust the
UV or Ozone functions. It takes 1-3 minutes for theAir Sensor to begin working.
 There are 3 indicators at the bottom of the LED panel that show theAir Sensor is
operating and the quality of the air.
 When the air quality is good, the unit will turn-off automatically. The unit will
automatically turn-on when the surrounding air needs purified.
7) Automatic Air-Sensor Setting
Air-Sensor Indicators Good Air Quality Slightly Polluted More Polluted Most Polluted
u Most functions of the Ultra-Pure 988 can be controlled
by the remote control included with this unit.
8) Remote Control
UV LIGHTUV LIGHT
AIRAIR
SENSORSENSOR
AIR PURFIER
LCD display showing all functions.

Owner’s Manual
Please carefully read this instruction manual and make
certain you fully understand all the operating instructions
and safety warnings so you can operate the product
correctly and safely.
Warning Attention
Warnings remind users that
mishandling or misuse of this
product may result in serious
injury or death.
Attention notes items of
importance about the
specifications, function,
or operation of the product.
ATTENTION
ATTENTION
If your appliance fails to function
correctly, unplug it for two minutes.
This will reset the units functions
to factory specifications.
Do not change the length
of wire by yourself.
FORCEFORCE
Do not use the unit around flammable
liquids or gases.
FORCE
Do not use the unit in areas of high
temperature. FORCE
Please unplug the unit from the
electric source if not using for a
long period of time.
Note: this unit WILL NOT remove
any carbon monoxide that may be
present.in the air.
Carbon Monoxide is a deadly gas!
FORCE
Do not clean the unit with corrosives.
Turn off the unit and unplug it before
cleaning.
FORCE
Turnoffthe powerbefore unplugging
the unit from the socket.
FORCE
FORCE
Do not use the unit around explosive
liquids or gases. ATTENTION
Do not use in a sealed or unventilated
room. The units is not a ventilator.
We reserve the right to change
product specifications at any
time without notification to the
consumer.
ATTENTION
WARNING
FORCE
Do not insert
any metal
objects into
this appliance!
FORCE
All repairs and
servicing must
be performed by
authorized service
technicians.
FORCE
This unit is
rated for
120v/60Hz
only!
FORCE
Do not place
this unit in
water or
any other
liquid!
FORBID
Do not repair this
unit by yourself.
Frayed wires may cause
electric shock or fire.
FORBID
Do not block air
intakes or exhausts.
Operating this unit with blocked
air intakes or exhaust will result
reduced efficiency of this unit and
may cause it to over heat.
FORBID
Do not allow
children to
operate this
appliance.
FORCE
Use caution
when plugging
and unplugging
this appliance.
Do not pull the plug by
its wire!
Cautions
Warranty
 Ultra-Pure warrants this product to be free from manufacturing
and material defects (excluding filters, lights, and batteries) for
a period of one year from the original date of purchase.
 This warranty is valid to the only original owner with a proof of purchase.
 Product abuse, misuse, modification, alteration, or opening of the air
purifier housing will void the warranty.
CAUTION:
NEVER IMMERSETHE APPLIANCE,CORD SET
OR PLUG INWATER OR ANY OTHER LIQUID.
1) The UV lights have a working life of more than 5000 hours.
2)Always turn the power off and unplug the unit before replacing
the UV light.
1) The HEPAfilter set may last up to 1 year based on 8 hours working
a day in a normal household environment.
2) Always turn the power off before replacing any filters.
3) Do not clean the HEPAfilter with water.
4) Always remove the plastic packaging on the filters before using.
UV Light Information
HEPA Filter Information
Technical Information
Care and Cleaning
1) Always disconnect the power cord before cleaning.
2) Wipe the enclosure, control panel, and cord with a damp cloth or sponge.
3) The intake grille can be removed and hand washed in warm, soapy water.
4) The washable pre-filer can be hand washed in warm soapy water. Air
dry the pre-filter before re-installing in the unit.
5) DO NOT wash the HEPA, Activated Carbon, or TiO2 filters.
6) The outlet grille should simply be dusted - do not immerse in water.
7) Do not use harsh abrasives or caustic cleaners on any part of the unit.
8) CAUTION: NEVER immerse the appliance, cord or plug in water or
any other liquid.
9) If the cord is damaged, the manufacturer or its service agent or similarly
qualified persons must replace it in order to avoid personal injury.

Owner’s Manual
Please carefully read this instruction manual and make
certain you fully understand all the operating instructions
and safety warnings so you can operate the product
correctly and safely.
Warning Attention
Warnings remind users that
mishandling or misuse of this
product may result in serious
injury or death.
Attention notes items of
importance about the
specifications, function,
or operation of the product.
ATTENTION
ATTENTION
If your appliance fails to function
correctly, unplug it for two minutes.
This will reset the units functions
to factory specifications.
Do not change the length
of wire by yourself.
FORCEFORCE
Do not use the unit around flammable
liquids or gases.
FORCE
Do not use the unit in areas of high
temperature. FORCE
Please unplug the unit from the
electric source if not using for a
long period of time.
Note: this unit WILL NOT remove
any carbon monoxide that may be
present.in the air.
Carbon Monoxide is a deadly gas!
FORCE
Do not clean the unit with corrosives.
Turn off the unit and unplug it before
cleaning.
FORCE
Turnoffthe powerbefore unplugging
the unit from the socket.
FORCE
FORCE
Do not use the unit around explosive
liquids or gases. ATTENTION
Do not use in a sealed or unventilated
room. The units is not a ventilator.
We reserve the right to change
product specifications at any
time without notification to the
consumer.
ATTENTION
WARNING
FORCE
Do not insert
any metal
objects into
this appliance!
FORCE
All repairs and
servicing must
be performed by
authorized service
technicians.
FORCE
This unit is
rated for
120v/60Hz
only!
FORCE
Do not place
this unit in
water or
any other
liquid!
FORBID
Do not repair this
unit by yourself.
Frayed wires may cause
electric shock or fire.
FORBID
Do not block air
intakes or exhausts.
Operating this unit with blocked
air intakes or exhaust will result
reduced efficiency of this unit and
may cause it to over heat.
FORBID
Do not allow
children to
operate this
appliance.
FORCE
Use caution
when plugging
and unplugging
this appliance.
Do not pull the plug by
its wire!
Cautions
Warranty
 Ultra-Pure warrants this product to be free from manufacturing
and material defects (excluding filters, lights, and batteries) for
a period of one year from the original date of purchase.
 This warranty is valid to the only original owner with a proof of purchase.
 Product abuse, misuse, modification, alteration, or opening of the air
purifier housing will void the warranty.
CAUTION:
NEVER IMMERSETHE APPLIANCE,CORD SET
OR PLUG INWATER OR ANY OTHER LIQUID.
1) The UV lights have a working life of more than 5000 hours.
2)Always turn the power off and unplug the unit before replacing
the UV light.
1) The HEPAfilter set may last up to 1 year based on 8 hours working
a day in a normal household environment.
2) Always turn the power off before replacing any filters.
3) Do not clean the HEPAfilter with water.
4) Always remove the plastic packaging on the filters before using.
UV Light Information
HEPA Filter Information
Technical Information
Care and Cleaning
1) Always disconnect the power cord before cleaning.
2) Wipe the enclosure, control panel, and cord with a damp cloth or sponge.
3) The intake grille can be removed and hand washed in warm, soapy water.
4) The washable pre-filer can be hand washed in warm soapy water. Air
dry the pre-filter before re-installing in the unit.
5) DO NOT wash the HEPA, Activated Carbon, or TiO2 filters.
6) The outlet grille should simply be dusted - do not immerse in water.
7) Do not use harsh abrasives or caustic cleaners on any part of the unit.
8) CAUTION: NEVER immerse the appliance, cord or plug in water or
any other liquid.
9) If the cord is damaged, the manufacturer or its service agent or similarly
qualified persons must replace it in order to avoid personal injury.