UMD 9000 series User manual

UMD NVR User Manual
UMD
HD NVR
User Manual
V1.1

UMD NVR User Manual
i
Statement：
In order to make users to quickly learn and master, skill use of embedded HD 9000 series
NVR，this manual will cover all operating system processes and requirements, please read
this manual carefully before using.
This manual applies to all versions V1.1 NVR9000 series models.
This manual is copyrighted by my company, may not be copied and used, otherwise
regarded as infringement. My company has the right to use legal means to safeguard the
interests of the reservation.
This operation manual will be updated time to time, without notice.
Safety Precautions：
Be sure to observe the following precautions when using this product：
Keep the level of the product installation.
Install the stable place, pay attention to prevent falling product.
Be used only within the rated input and output range.
Do not disassemble this product.
NVR cannot be placed on containers with liquids (such as water cup).
The NVR places in adequate ventilation space, to avoid direct sunlight and place near a
heating device
Enable network DVR work within the allowable range of temperature and humidity。
THE Dust inside the circuit board can cause a short circuit after the damp, regularly with

UMD NVR User Manual
ii
a soft brush on the circuit board, connectors, chassis and chassis fan for dust.
Please select the appropriate NVR storage hard disk work required to meet long-term
requirements of the large amount of data read and write, it is recommended security
monitoring dedicated storage hard disk, hard disk storage purchases from the formal
channels to ensure quality.
Preparatory work and Suggestion：
Using an HDMI cable to connect the NVR and HD display devices, you can get a better
output display effect.
Before using a NVR, checking the power and network cables connected properly, we
recommend using the formal cable manufacturers of cable to ensure the quality and
stability of the network transmission.
Before using NVR, change the factory default IP; by [main menu] - [Network Settings] to
enter the network settings interface, the factory default IP address is 192.168.1.188, the
default port 80; for normal use network functions, we recommend that you Change the
factory default settings.
Before connecting the IP camera, please change the IP address for each IP camera, to
prevent duplicate IP addresses and IP addresses conflict occurs，at the same time please
check whether the IP address of the IP camera and NVR's IP address in the same network
segment .
Suggesting that using the display or monitor supports 1080P, if screen display abnormal，
you can set [main menu] - [System Settings] to enter the basic settings screen, change
the display resolution

UMD NVR User Manual
iii
The factory default login user name: "admin", password is "admin", it is strongly
recommended that you modify the user name or password after entering the system,
improve system security level.

UMD NVR User Manual
iv
The directory
1. Introduction..........................................................................................................................................1
1.1 The purpose of writing.............................................................................................................1
1.2 Appearance.................................................................................................................................1
1.2.2 2U Series...........................................................................................................................1
2. Operating Instructions .......................................................................................................................3
2.1 Menu Item Description ............................................................................................................3
2.1.1【System Settings】menu navigation .........................................................................3
2.1.2【IPC Management】Menu navigation ......................................................................5
2.1.3【Advanced Options】menu navigation ....................................................................7
2.1.4【System Information】menu navigation ..................................................................8
2.1.5【Close】menu navigation system ..............................................................................9
2.2 Input Method Description .....................................................................................................10
3. Scope of application .........................................................................................................................11
3.1 Hardware environment ..........................................................................................................11
3.2 Software Environment ............................................................................................................11
4. Basic Operations................................................................................................................................12
4.1 Startup .......................................................................................................................................12
4.2 Preview.......................................................................................................................................12
4.3 Change password ....................................................................................................................13
4.4 PTZ operation...........................................................................................................................14
4.5 Recording Control ...................................................................................................................14

UMD NVR User Manual
v
4.6 Playback.....................................................................................................................................15
4.7 Recording data backup ..........................................................................................................15
4.8 System Upgrade ......................................................................................................................16
4.8.1 USB upgrade..................................................................................................................16
5. Detailed operation ............................................................................................................................18
5.1 System Log................................................................................................................................18
5.2 System shutdown ....................................................................................................................18
5.3 Right menu ...............................................................................................................................19
5.3.1 Preview mode................................................................................................................19
5.3.2 Screen polling................................................................................................................22
5.3.3 Manual Recording ........................................................................................................23
5.3.4 Preview Snapshot .........................................................................................................23
5.3.5 PTZ control.....................................................................................................................24
5.3.6 Audio Monitoring.........................................................................................................26
5.3.7 Playback Backup ...........................................................................................................26
5.3.7.1 Query video ........................................................................................................27
5.3.7.2 Video playback...................................................................................................27
5.3.7.3 Backup video ......................................................................................................28
5.3.8 Arm / Disarm .................................................................................................................29
5.3.9 Locking System .............................................................................................................30
5.4 System Settings........................................................................................................................31
5.4.1 General Settings............................................................................................................31
5.4.2 Recording Scheme........................................................................................................33

UMD NVR User Manual
vi
5.4.3 Video Control ................................................................................................................34
5.4.4 Preview Settings............................................................................................................35
5.4.5 Exception Handling ......................................................................................................35
5.4.6 Detection alarms...........................................................................................................37
5.4.7 Alarm Output.................................................................................................................39
5.5 Playback Backup ......................................................................................................................40
5.6 IPC Management.....................................................................................................................40
5.6.1 IPC add / modify management .................................................................................41
5.6.2 IPC delete .......................................................................................................................42
5.6.3 IPC channel settings.....................................................................................................42
5.6.4 IPC encoding settings..................................................................................................43
5.6.5 IPC video detection ......................................................................................................45
5.7 Advanced Options...................................................................................................................48
5.7.1 Disk Management ........................................................................................................48
5.7.2 User Settings..................................................................................................................49
5.7.3 The system upgrade.....................................................................................................51
5.7.4 System maintenance....................................................................................................51
5.7.4.1 Routine maintenance........................................................................................51
5.7.4.2 The diagnostic function of the system..........................................................52
5.7.4.3 The heartbeat function.....................................................................................52
5.7.5 To restore the default...................................................................................................52
5.7.6 TV regulation .................................................................................................................53
5.8 Network settings .....................................................................................................................54

UMD NVR User Manual
vii
5.8.1 The basic network settings.........................................................................................54
5.8.2 DNS settings..................................................................................................................55
5.8.3 FTP settings....................................................................................................................56
5.8.4 EMAIL settings...............................................................................................................57
5.8.5 DDNS settings ...............................................................................................................57
5.8.6 PPPoE settings...............................................................................................................58
5.8.7 NTP settings...................................................................................................................59
5.8.8 Multicast settings .........................................................................................................59
5.9 System Information.................................................................................................................60
5.9.1 Version Information .....................................................................................................60
5.9.2 Log Information ............................................................................................................61
5.9.3 Internet users.................................................................................................................62
6. Web Client ..........................................................................................................................................64
6.1 Introduction..............................................................................................................................64
6.2 System Log................................................................................................................................64
6.2.1 Network connection ....................................................................................................64
6.2.2 WEB operation ..............................................................................................................64
7 Appendix: toxic and hazardous substances or elements in the reference list ......................69

UMD NVR User Manual
1
1. Introduction
1.1 The purpose of writing
To enable customers to use NVR products more easily, specially writing this manual。
This operation manual will be updated time to time, without notice.
1.2 Appearance
Appearance information is continuously updated and revised new note
1.2.2 2U Series
Appearance
Backplane

UMD NVR User Manual
2
1
Video output
2
Audio output
3
Talkback input
4
Talkback output
5
VGA Interface
6
Network Interface (RJ45)
7
USB Interface
8
HDMI Interface
9
ALARM IN
10
ALARM OUT
11
ALARM GND
12
RS485 Interface
13
Ground
14
Power fan
15
Power switch
16
220VAC inlet

UMD NVR User Manual
3
2. Operating Instructions
2.1 Menu Item Description
2.1.1【System Settings】menu navigation
Main
menu
items
Functional options
Main menu
items
Functional options
Basic
Settings
Set the system time；
Language Selection；
Resolution setting；
Write disk mode；
System Lock Time
Preview
Settings
Open polling enabled；
Polling mode settings；
Polling interval setting；
Capture settings
Recording
Scheme
Channel pre-recorded
alarm time setting;
Channel recording delay
settings；
Channel recording time
setting；
Channel recording mode
setting
Exception
Handling
Bad hard drive, IPC address conflict,
network cable disconnected, unauthorized
access and other abnormal type selection；
Exception handling enabled；
Set the alarm output port；
Abnormal alarm output delay settings；
Alarm processing mode selection

UMD NVR User Manual
4
Detection
alarm
Detection alarm Channel
Enable ；Set arm and
disarm time period；
Detection equipment
switch type selection；
Alarm output port, alarm
linkage video channel
settings；
Alarm delay setting；
Alarm linkage PTZ
settings；
Alarm handling
Video
Control
Automatic video selection；
Select manual recording；
Off Video
Alarm
Output
Automatic alarm；
Manual alarm；
Close all alarms
Supervision
platform
Network Device Management
Departure capture
Alarm capture
Timing capture

UMD NVR User Manual
5
2.1.2【IPC Management】Menu navigation
Main menu items
Functional options
IPC basic management
IPC added，
Automatic search；
IPC deleted
IPC channel Settings
Channel name；
Video parameters；
OSD location；
OSD display；
Cover regional Settings；

UMD NVR User Manual
6
IPC Encoding Settings
Channel encoding format；
Stream channel settings；
Channel quality setting；
Channel stream type；
Channel frame rate；
Video streaming / audio and composite video stream selection；
IPC Video Detection
Video detection area selection；
Video detection sensitivity settings；
Set arming time；
Alarm output port；
Alarm delay；
Linkage video settings；
Alarm processing mode；

UMD NVR User Manual
7
2.1.3【Advanced Options】menu navigation
Main menu items
Functional options
Main menu
items
Functional options
Hard disk
management
The current drive status；
Set to read-only disc；
Set to read and write disk；
Formatting hard disk；
System
Maintenance
Set automatic restart time；
Export Profile；
Import profile
User Settings
New Group；
Modify Group；
Add User；
Modifying User；
Restore Default
Restore the system to set the
default parameters；
Restore IPC to set the default
parameters；

UMD NVR User Manual
8
Change Password；
Restore the default parameters
of alarm setting；
Restore the default parameters
of network；
Restore the default parameters
of system；
System Upgrade
The current system version
information；
Upgrading the system
version；
TV adjustment
Up and down about position
adjustment
2.1.4【System Information】menu navigation
Main menu items
Functional options

UMD NVR User Manual
9
Version Information
Displays version information；
Log Information
Display the log information; Log Export
Internet users
Displays network user information; disconnect Internet users;
2.1.5【Close】menu navigation system
Main menu items
Functional options
Log off the system
Log off the system
Reboot the system
Reboot the system
Shut down the system
Shutdown

UMD NVR User Manual
10
2.2 Input Method Description
The system supports numbers, letters, Chinese input and other input Chinese Input
methods.

UMD NVR User Manual
11
3. Scope of application
3.1 Hardware environment
This operating manual applies to NVR9000 family of embedded network DVR type.
3.2 Software Environment
This operating manual applies to above V1.0 of software version.

UMD NVR User Manual
12
4. Basic Operations
4.1 Startup
General steps:
2U
After ensuring access to the standard 220V AC power, open the power switch on the rear
case; at this time total power of the machine is turned on, the machine enter the boot state.
Recommend to use the manufacturer standard power cord.
Abnormal power outage:
When powered on, the machine automatically enter the working state.
When the machine is in normal operating state, the power light is red.
4.2 Preview
After the device starts to enter the preview mode, on the preview screen you can see the
superimposed channel, time, recording mode, alarm status and other information.
The recording mode and the video status information table is as follows:
Recording Status
Video Status
Icon
Recording Status Description
Icon
Video Status Description
Timer recording
Video loss
Manual Recording
Video shelter
Motion detection linkage video
Motion Detection
Sensor alarm linkage video
Monitor