Uni-Ubi Uface 3 User manual

In order to have a good experience when using, please read the manual carefully before operating the device.Uface 3 User Manual

Device Appearance27.4 [1.1]
USB Interface
Restart
100 [3.9]
Infrared Fill-in Light
RGB Camera
IR Camera
Photosensitive Sensor
Display Screen
Swiping Area (pro version)
Power Interface
I/O Interfaces (PRO version)
120 [4.7]

Product ListDesktop Mounting Bracket x 1M4*30 Self Tapping Screw x 2Host x 1Desktop Mounting x 2Allen Key x 1M4*30 Machine Screw x 2Manual x 1Set Screw x 1Mounting Sticker x 1In order to help you better understand the product,please read the instructions carefully before using the device.Uface 3Overseas Attendance Manual

Wall MountingUse an Allen Key to loosen the set screw and remove the wall mounting bracket.123For wall mounting, the hole shall be drilled according to the hole position of the mounting sticker, and the desktop mounting shall be inserted in the holes.For wall mounting, use self-tapping screws to fix the bracket on the wall; for 86 box mounting, use machine screws to fix the bracket on the 86 box.

Connect the cable and I/O interfaces (Pro version) to the device.Finish the mounting.456Connect the power supply
Following the customer's needs to connect
the door lock and exit button.
Fasten the device to the wall mounting bracket and use an Allen Key to tightenthe bottom set screw.

Desktop Mounting12Tilt 30° when inserting
Tilt 20° when inserting
Tilt 10° when inserting
Desktop Mounting Bracket
After removing the wall mounting bracket, connect the power supply or I/O interfaces.Connect the power supply
Following the customer's needs to connect
the door lock and exit button.
DOOR_NC
DOOR_COM
DOOR_NO
BUTTON
GND

Finish the mounting.34After the cable is connected, reinstall the wall mounting bracket to the device, and insert the desktop mounting bracket into the holes of different heights according to the angle requirements.

StandaloneNetworkClick ( ) to enter the Menu.11Click ( ) after entering the device password.2You can choose to turn WLAN on or off, and then choose the wireless network after turning on.2Click the menu item to enter.3Click the WIFI name and enter the password to connect.3
Login
Please input password
84E0F42212345678
192.168.41.128
GD-V30.1035
Forgot password
Network Config
WLAN
TP-LINK_10F0
Tenda_10DC48...
Select nearby Wi-Fi
TP-LINK_10F0
Connect
Please input password
Set
Network Config
User Mgmt.
Records
System Settings
Set
Network Config
User Mgmt.
Records
System Settings
Click the Network Config to configure the network. If the configuration is completed in booting, there is no need to reconfigure.

Add UsersClick (User Mgmt.) to enter the user management interface.1Click Add users. 2
Set
Network Config
User Mgmt.
Records
System Settings
User Management
Add users
Query users
Batch import
Batch export
4Enter 1-32 digit Emp. No. (required) and name (optional), and click Next3In this interface, directly swipe the card to enroll the card number (optional, for card mode) and enter the 4-digit password (optional, for password mode), and click Next.5After choosing the user authority information, (the card mode and the face&card are mutually exclusive), click Save, and the user is added.6
Add users
Next
Employee No.
*
Please input Emp. No.
Name
Please input name
Add users
Next
Registration photo
Click + to enter the photo-taking process to add the photos (optional, for face recognition) (up to 3 registered photos), and then click Next.
Add users
Next
Card no.
Enroll card no. directly
Password
Input 4-digit password
Permission info
Save
Face
Card
Face&Card
Emp. no.+Password

Recognition ModeThe registered user enters the photo to enable the face recognition mode and then conducts face recognition in the main interface.FaceThe registered user enters the card number to enable the card mode and then swipes the card in the swiping area of the main interface.CardThe registered user enters the password to enable the password mode, clicks (Key) in the main interface to enter the password interface, and then enters the Emp.No. & password.PasswordThe registered user enters the photo and card number to enable the face&card mode and conducts face&card dual verification in the main interface.Face&Card

Clock-in RecordsClick (Records) to enter the records interface1Click to enter the directory2Only abnormal records 4Check the clock-in records3Export, choose the time span5Choose export status6
Clock-in records
054
Rey Mibourne
00:34:26
094
Martina Brito
15:43:26
155
Zeng Wen
13:14:17
2019-12-11
Abnormal records
054
Hugo Saavedra
00:34:26
stranger
15:43:26
stranger
13:14:17
2019-12-11
Export status
Export
All attendance state
Abnormal attendance state
Start time
Next
2020
November
December
2019
2021
October
2017
September
Set
Network Config
User Mgmt.
Records
System Settings
Attendance Records
Clock-in records
Abnormal records
Export records
345

CCE Caution: Use the Product in the environment with the temperature Between -10℃ and 40℃; Otherwise, it may damage your product. Products can only be used below 2000m altitudeFor the following equipment: Product Name: FACE RECOGNITION TERMINALBrand Name: Model No.: K32-1901-OS-TDC, K32-1901-OS-TUniversal Ubiquitous Co.,Ltd.E-mail: [email protected]hereby declares that this [Name: FACE RECOGNITION TERMINAL, K32-1901-OS-TDC, K32-1901-OS-T] is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.Adapter shall be installed near the equipment and shall be easily accessible. Only can use adapter as below: Power Adapter Model: XED-CE050200CU Input: AC100-240V, 50/60Hz, 0.3A Output: DC5V, 2.0ASHENZHEN XED POWER SUPPLY CO., LTD Universal Ubiquitous Co., Ltd.The plug considered as disconnect device of adapter. This product is intended for sale and application in a business environment. RED Article 10 2-This product can be used across EU member statesRED Article 10 10-The product is class 1 product, No restrictionsThe RF distance between body and product is 20cm. Frequency Range: WIFI:2412-2472MHz for 802.11b/g/n(HT20) 2422-2462MHz for 802.11b/g/n(HT40) Max.RF Output Power: 17.01dBm (EIRP) NFC:13.56MHzRadiated H-Field: 16.36dBuA/m(@3m)

FFCC WarningThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.RF exposure statementThis equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.