Datavan G-615 User manual

Glamor Series
G-615 / G-615S / G-715 / G-715S(R)
Version 1.1
User Manual

2
About this Manual
Thank you for purchasing Glamor Series Touch Terminal. This terminal offers highly enhanced
features, with easy connection to various optional devices for optimal performance. This user
manual describes how to setup and connect your terminal.
Copyright
© Copyright 2015
All rights reserved. This product and related documentation are protected by copyright and
are distributed under licenses restricting their use, copying, and distribution. No part of this
documentation may be reproduced in any form by any means without prior written authorization of
the manufacturer and its licensors, if any.
Safety Information
Before you Proceed:
Read the safety notices and the User Manual carefully before using the product.
Keep the box and packaging in case the product needs to be shipped in the future.
Follow the product and warning label instructions.
$Q\FKDQJHVRUPRGL¿FDWLRQVWKDWGRQRWIROORZWKHLQVWUXFWLRQVLQWKLVPDQXDOZLOOYRLGWKLVproduct’s warranty.
Power Supply Safety Notes:
To avoid electric shocks, disconnect the power cord from the electrical outlet before
relocating the system.
Make sure the voltage of the power outlet conforms within voltage range of the terminal.
Failure to comply may cause the electric shock or damage to the terminal. If you are not
sure of the electricity voltage that you are using, consult your local electricity company.
7RDYRLG¿UHRUHOHFWULFVKRFNVGRQRWRYHUORDGHOHFWULFSRZHURXWOHWVProtect the power cord from being walked on or pinched particularly at plug, convenience
receptacles, and the point where they exit from the apparatus.
Operating Instructions
Keep this manual for future reference.
Keep this equipment from moisture and dust.
Place the equipment on a stable surface before setting it up.

3
,IWKHUHLVDQ\RIWKHIROORZLQJVLWXDWLRQDULVHQRWLI\DTXDOL¿HGVHUYLFHWHFKQLFLDQimmediately:
¸The power cord or plug is damaged.
¸Liquid has been spilt on to the equipment.
¸The equipment has been dropped and damaged.
¸The equipment does not function normally.
Do not block any ventilation openings to prevent the equipment from overheat.
Do not leave the equipment in a non air-conditioned environment where the storage
temperature may go above 70°C (158°F), as this can cause damage to the equipment.
Maintenance
Gently wipe screen with a clean soft hair lens brush, or a lint-free cloth.
Do not apply pressure to the screen while cleaning.
Do not spray any liquid directly onto the screen or the casing of the terminal.
Chemical cleaners have been reported to cause damage on the screen of the terminal.
Warning and Attention
7KHWHFKQLFDOGHVFULSWLRQVDQGVSHFL¿FDWLRQVRIWKHHTXLSPHQWDUHVXEMHFWWRFKDQJHZLWKRXWnotice.
For safety reasons, wear gloves when assembling the product.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
Patent
Patent pending.
CE Statement
A Class III equipment with an enclosure made of HB material and using a non-special
connector for the a.c./d.c. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
If product with laser module, the class of laser should be mentioned. The warning as
attachment.

4
Federal Communications (FCC Statement)
7KLVGHYLFHFRPSOLHVZLWK)&&5XOHV3DUW2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZRFRQGLWLRQVThis device may not cause harmful interference.
This device must accept any interference received including interference that may cause
undesirable operation.
This equipment has been tested and found to comply within the limit of a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the manufacturer’s instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by switching the equipment on and off, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the interference receiving antenna.
Increase the distance of separation between the equipment and interference receiver.
Connect the equipment to a power outlet on a circuit different from that to which the
interference receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Warning
The use of shielded cables for connection of the monitor to the graphics card is required to assure
FRPSOLDQFHZLWK)&&UHJXODWLRQV&KDQJHVRUPRGL¿FDWLRQVWRWKLVXQLWQRWH[SUHVVO\DSSURYHGE\the party responsible for compliance could void the user’s authority to operate this equipment.

5
CB/LVD Statement
A Class III equipment with an enclosure made of HB material and using a non-special
connector for the a.c./d.c. input has to have a marking stating the following: “Use only
power supplies listed in the user instructions” or “For applicable power supplies see user
instructions”. This statement shall also be in the user-instructions.
If product with laser module, the class of laser should be mentioned. The warning as
attachment.
CCC Statement
Ԝ䜀B䵠䜨ࠔǴӧғࢲ㣞ნύǴ俗䜨ࠔёૈ㜘೷ԋ㛐䵸䰃υ᧏Ƕӧ㤄ᳪ௃㝽ΠǴёૈሡҔ㛌㛱υ᧏ߍڗϪ㡵ёՉޑ௛ࡼǶBSMI Statement
Ǹ!ௗᑻჿᆶᡉҢь܌٬ҔޑٛᅶᢑጕѸ໪ዴჴᒥӺGDDೕጄǶ҂ᕇቷ୘ܴዴӕཀԶᏰԾᡂ׳܈অׯҁး࿼ǴёૈᏤ٬Ҕޣޑ٬Ҕ៾ѨǴԶคݤᝩុᏹբҁ೛ഢǶǸ!᝾֋٬ҔޣǺ೭ࢂҘᜪޑၗૻౢࠔǴӧۚՐޑᕉნύ٬ҔǴёૈԋ৔ᓎυᘋǴӧ೭ᅿ௃ݩ٬Ҕޣ཮೏؃௦ڗࢌ٤፾྽ޑჹ฼ǶWEEE Notice
The WEEE logo (shown at the left) on the product or on its box indicates that this product must
not be disposed of or dumped with your other household waste. You are liable to dispose of
DOO\RXUHOHFWURQLFRUHOHFWULFDOZDVWHHTXLSPHQWE\UHORFDWLQJRYHUWRWKHVSHFL¿HGFROOHFWLRQpoint for recycling of such hazardous waste. Isolated collection and proper recovery of your
electronic and electrical waste equipment at the time of disposal will allow us to help conserving
natural resources. Moreover, proper recycling of the electronic and electrical waste equipment
will ensure safety of human health and environment. For more information about electronic and
electrical waste equipment disposal, recovery, and collection points, please contact your local
city center, household waste disposal service, shop from where you purchased the equipment, or
manufacturer of the equipment.

6
Contents
Chapter 1: Introduction............................................................ 8
Package Contents.................................................................................... 8
Overview of Glamor Series ..................................................................... 9
Front View ...................................................................................................9
Rear View....................................................................................................9
Physical Dimensions .................................................................................11
6SHFL¿FDWLRQV......................................................................................... 14
7RXFK7HUPLQDO6SHFL¿FDWLRQV...................................................................14
3HULSKHUDOV6SHFL¿FDWLRQV.........................................................................17
Chapter 2: Preparing For the Installation............................. 21
System Default Settings........................................................................ 22
0DLQ%RDUG-XPSHU6HWWLQJDQG&RQQHFWRU'H¿QLWLRQ..................... 23
G-615 ........................................................................................................23
G-715 ........................................................................................................25
G-615S ......................................................................................................27
G-715S/G-715SR ......................................................................................30
Signal Convergence Board Connector ................................................ 33
Extension I/O Brick Board Connector
(For G-715SR only) ................................................................................ 34
9ROWDJH2XWSXW'H¿QLWLRQ...................................................................... 35
G-615 / G-715 ...........................................................................................35
G-615S ......................................................................................................35
G-715S/G-715SR ......................................................................................36
Calibrating the Touch Screen in Windows .......................................... 37
Setting the LCD Brightness .................................................................. 39
G-615 ........................................................................................................39
G-715 ........................................................................................................40
G-615S ......................................................................................................42
G-715S/G-715SR ......................................................................................43

7
Chapter 3: Hardware Installation .......................................... 44
Adjusting the System Stand ................................................................. 44
Installing the Power Cord, Power Adapter, and Network Cable ........ 46
Installing the Customer Display (Optional) ......................................... 48
Installing the Secondary LCD Display (Optional) ............................... 50
Installing the IG-20L MSR (Optional).................................................... 54
,QVWDOOLQJWKH,*/LQ,GHQWL¿FDWLRQ5HDGHU2SWLRQDO.............. 56
Installing the Secondary Hard Disk Drive (Optional).......................... 59
Installing the Wireless Module (Optional)............................................ 62
Installing the UPS Kit (Optional)........................................................... 64
Installing the VESA Mount (Optional) .................................................. 66
Chapter 4: Frequently Asked Questions (FAQ) ................... 69
Question 1: Why does the system appear unstable after updating
BIOS? ...................................................................................................... 69
Question 2: How do I clear CMOS?...................................................... 71
Question 3: How to use Boot Menu? ................................................... 74

8
INTR ODUCT ION
Chapter 1
Introduction
Congratulations on your purchase of this Touch Terminal. Your easy-to-use POS terminal is
GHVLJQHGWRKHOS\RXHQKDQFH\RXUEXVLQHVVÀH[LELOLW\E\RIIHULQJVXSHULRUFXVWRPHUH[SHULHQFHPackage Contents
Before setting up your Touch Terminal, check that the package contains the following items. If any
of the items is missing or damaged, contact your vendor immediately.
Quick
Installation Guide
Touch Terminal Power Cord & Adapter Accessory Kit
Optional Accessories
VESA plate
(for VESA model only)
Customer Display
(VFD/LCM)
Second LCD Display (8”/10”)
RFID
065,GHQWL¿FDWLRQReader MSR+iButton
,GHQWL¿FDWLRQ5HDGHU5),',GHQWL¿FDWLRQReader
Fingerprint
,GHQWL¿FDWLRQ5HDGHUL%XWWRQ,GHQWL¿FDWLRQReader
Second Hard Disk
Drive Installation Kit
Wireless Module UPS Kit

INTR ODUCT ION
9
Overview of Glamor Series
7KH¿JXUHVLQWKLVVHFWLRQLOOXVWUDWHWKHFRPSRQHQWVLQFOXGLQJLQSXWDQGRXWSXWSRUWVORFDWHGDWthe front and rear of your Touch Terminal.
Customer Display Type Secondary LCD Display Type
NOTE:/&09)'FXVWRPHUGLVSOD\LVDQRSWLRQDODFFHVVRU\VHFRQG/&'GLVSOD\LVDQRSWLRQDODFFHVVRU\ZLWK,*LGHQWL¿FDWLRQUHDGHUZLWK,*LGHQWL¿FDWLRQUHDGHUNOTE:,*LGHQWL¿FDWLRQUHDGHULVDQRSWLRQDODFFHVVRU\,*LGHQWL¿FDWLRQUHDGHULVDQRSWLRQDODFFHVVRU\Front View
Standard Type
Rear View
Standard Type

10
INTR ODUCT ION
I/O Ports
USB 12V USB 24VUSB 12V USB COM
*for G-715SR only.
Item Description
'&287MDFN12V DC power output
'&,1MDFN24V DC power input
COM ports COM connectors
K/B port PS/2 keyboard connector
DK port Cash Drawer output
E-SATAp port E-SATA + USB connector
USB2.0 ports USB2.0 connectors
USB3.0 ports USB3.0 connectors
LAN port Gigabit LAN connector
VGA port VGA output connector
Line Out port Audio line output connector
HDMI port HDMI Vertical connector
USB 12V 12V Powered USB connector
USB 24V 24V Powered USB connector
G-615 / G-715
G-615S
G-715S(R)

INTR ODUCT ION
11
Physical Dimensions
Standard Display
360.867
414.95
249.833 210
249.833
414.95
307.422107.5313.365

12
INTR ODUCT ION
LCM/VFD Customer Display
227.406
278.6
290.747 210 210
30°
60°
45°
45°
45°
45°

INTR ODUCT ION
13
8” Secondary LCD Display
305.959
357.203
349.876
209.954 210
30°
60°
45°
45°
45°
45°

14
INTR ODUCT ION
6SHFL¿FDWLRQV7RXFK7HUPLQDO6SHFL¿FDWLRQVModel number Glamor Series
G-615 G-615S G-715 G-715S G-715SR
LCD & Touch Panel
LCD Panel 15” LED-backlit display
Resolution 1024 x 768 (default)
Brightness 250 cd/m2
Touch Screen )ODW5HVLVWLYHGHIDXOW3URMHFWHG&DSDFLWLYH7RXFKZWHPSHUHGJODVV6\VWHP&RQ¿JXUDWLRQIntel®CPU
Atom™ D525
1.8GHz (Dual-
core)
Celeron®
J1900 2.0GHz /
2.42GHz(burst)
(Quad-core)
Celeron®
2.4GHz
Core™
2.8GHz
Core™ i5
2.9GHz
Celeron® 2.2 GHz
Core™ i3 2.4 GHz
Core™ i5 2.7 GHz
Chipset South Bridge:
ICH8M SoC
Intel® H61
Express
Chipset
Intel® Q87/
H81 Express
Chipset
Intel® Q87
Express
Chipset
Main Memory
204Pin DDR3
RAM*2 slots,
up to 4GB
204Pin DDR3L
RAM*2 slots,
up to 8GB
204Pin DDR3
RAM*2 slots,
up to 16GB
204Pin DDR3L RAM*2 slots,
up to 16GB
Graphic Memory
Shared
memory up to
384MB DVMT
Shared
memory up
to 1696MB
DVMT
Shared
memory up
to 1720MB
DVMT
Shared memory up to 1720
MB DVMT
Storage
1 x 320G 2.5” SATA HDD (default)
32/64/128GB 2.5” SSD (option)
Dual disk drives (option)
mSATA(option)
RAID function n/a n/a n/a RAID0/1 (Q87 chipset is
required)
Remote
Management n/a n/a n/a Intel AMT9.0 (Core™ i5 CPU
is required)

INTR ODUCT ION
15
Model number Glamor Series
G-615 G-615S G-715 G-715S G-715SR
I/O Ports
Parallel (option) by cable output
USB2.0 4 2 4 3
USB3.0 0 2 0 2
eSATAp/USB2.0
combo 1 1 1 1
RJ45 COM 4 3 4 3
Gigabit Ethernet 1 1 1 1
Line out 1 1 1 1
PS/2 keyboard 1 1 1 1
VGA 1 1 1 1
HDMI 0 1 0 1
RJ12 cash
drawer 1
1 (Dual
cash drawer
support)
1(Dual cash
drawer
support)
1(Dual cash drawer support)
DC12V out 1 1 1 1
DC in 1 1 1 1
Extension I/O
Brick n/a n/a n/a n/a
2*12V P-USB
2*24V P-USB
1*USB2.0
1*RJ45 COM
Powering System
Power Supply External DC power adapter. AC90 to 264V full range
Power Button 1 x System on/off trigger
Brightness
Control Yes, by BIOS setting
Physical Dimensions
Dimension
(L x W x D) )ROGÀDWPP/RZSUR¿OHGHJUHHPPUpright (60-degree): 313*361*307mm
Weight Net weight: 6.6Kg (with stand)/ 3.9Kg(without stand)
Gross weight: 7.6Kg(with stand)/ 4.9Kg(without stand)

16
INTR ODUCT ION
Model number Glamor Series
G-615 G-615S G-715 G-715S G-715SR
Safety & Environment
Product
&HUWL¿FDWLRQ&()&&&%/9'FHUWL¿FDWHGOperation
Temperature 0°C to 40°C
Storage
Temperature -25°C to 70°C
O/S Compatibility
Windows XP
/ WEPOS /
POSReady
2009 /
Windows 7/
POSReady 7
/ Linux Kernel
2.6 or above
Windows 7 /
POSReady 7
/ Window 8.1
/ Linux Kernel
2.6 or above
Windows XP
/ WEPOS /
POSReady
2009 /
Windows 7 /
POSReady 7
/ Window 8.1
/ Linux Kernel
2.6 or above
Windows 7 / POSReady 7 /
Window 8.1 / Linux Kernel
2.6 or above
NOTE:6SHFL¿FDWLRQVDUHVXEMHFWWRFKDQJHZLWKRXWQRWLFH

INTR ODUCT ION
17
3HULSKHUDOV6SHFL¿FDWLRQVVacuum Fluorescent Display (VFD)
Model no. CM-7100
Display Method Vacuum Fluorescent Display (VFD)
Polarizer color Black
Backlight color Yellow green
Brightness 500-1000 cd/m2
Display capacity 20 characters x 2 lines
Character format 5 x 7 dot matrix, cursor
Character type 95 Alphanumeric, 32 International characters
Dot size 0.55 (W) X 0.75 (H) mm
Input power type 5V DC
Interface RS232
Liquid Crystal Module (LCM)
Model no. CM-3000
Polarizer color Blue
Backlight color White
Display capacity 20 characters x 2 lines
Character format 5 x 8 dots
Character type
International (Default)
(QJOLVK5XVVLD(QJOLVK-DSDQHVH7UDGLWLRQDO&KLQHVH6LPSOL¿HG&KLQHVH(Optional, factory-installed required)
Dot size 0.93 (W) x 1.11 (H) mm
Input power type 5V DC
Interface RS232

18
INTR ODUCT ION
2nd LCD Display
Model no. MN-0810 MN-1010
LCD Panel 8” TFT LED backlight 10.4” TFT LED backlight
Resolution 800 x 600
Color 262,144
Viewing Angle 140° (H) / 125° (V) 110° (H) / 150° (V)
Response Time 25ms (typical) 30ms (typical)
Contrast Ratio 500:1 (typical)
Brightness 250 nits (typical) 300 nits (typical)
Video Input Analog VGA
Power Supply DC 12V DC 12V
,GHQWL¿FDWLRQ5HDGHU065,GHQWL¿FDWLRQ5HDGHU065L%XWWRQ,GHQWL¿FDWLRQ5HDGHUModel no. IG-20L
MSR
ISO Track 1/2/3 single/dual/ triple tracks of magnetic card, support ANSI/
ISO Standards7810, 7811 1/5, 7812 & 7813. USB HID Keyboard mode
interface
iButton Detector Dallas DS1990A compliment / With leading / ending programming
function. USB HID Keyboard mode interface

INTR ODUCT ION
19
RFID
)LQJHUSULQW,GHQWL¿FDWLRQ5HDGHU5),',GHQWL¿FDWLRQ5HDGHUL%XWWRQ,GHQWL¿FDWLRQ5HDGHUModel no. IG-10
iButton Detector Dallas DS1990A compliment / With leading / ending programming
function. USB HID Keyboard mode interface
Biometric
Fingerprint
Recognizer
Digital Personal U. are .U 4500B (Optical Type / Blue Light) Module
Size: Approx. 57.7mm * 35.8mm*11.0mm Compatible with USB 1.1 / 2.0
(Full Speed). USB HID Keyboard mode interface
RFID reader Frequency 13.56MHz. ISO14443A card type MIFARE® 1K/4K/8K card
type. Read only. USB HID Keyboard mode interface
NFC reader
Frequency 13.56MHz. ISO14443A, ISO1443B, ISO15693, PicoTag read
UID and data, Felica read UID. MIFARE®:1-3cm, IS15693:2-4cm. USB
HID Keyboard mode interface
Wireless Module
Interface USB2.0
Wireless Type IEEE 802.11ac/a/b/g/n/d/e/h/i
Frequency Range 2.4GHz and 5GHz dual band

20
INTR ODUCT ION
UPS
Input Data
Nominal input voltage DC24V
Input voltage range DC22V~DC26V
Buffer time +Ua+U'HSHQGLQJRQ326V\VWHPDQGFRQ¿JXUDWLRQOutput Data in Normal Operation
Nominal output voltage DC 21.09V ~ 23.31V
Output current 2.7A
Current limit 9A
Charging
Charge characteristic
curve Liner mode
End-of-charge voltage DC12.6V
Charge current DC1.35A (C.C. Mode under DC 12.6V)
Ambient temperature
Operation/storage 0°C to +40°C / 20°C to +70°C
Humidity At +25°C 5%~ 95%, no condensation
Other
MTBF (Bellcore mode /
Not including Battery Set)
A target calculated MTBF of the power supply is greater than
200,000 hours under the following condition: 24Vdc input, Full
rated load, 25°C ambient