Unical Ufly BOX Datasheet

ENGLISH
TOUCH CONTROL
INSTALLATION AND SERVICING MANUAL
Uy BOX

3
1Description
KEY
1RJ cable for wiring to BMM boiler.
2Display Touch
3 Led di stato
green In operation OK (xed light)
red
Failure deyected (ashing light)
4Magnets for xing
5RJ plug
1.2 - Part description
1.1 - Reading Icons
Buttons and symbol (outline + lled color area)
This service is in operation at that time
Buttons and symbol (outline in dark grey no lled
area)
Disabled or switched off service but present or
installed
Buttons and symbol (outline + empty color area)
Present and active service but not in operation at
that time
Buttons and symbol (outline in ligh grey no lled
area)
No service or not installed

4
2Display and functions description
6Display mode
Disbled
7Display mode
Home page
8Display mode
Menù page
2.1 - Display mode
2.2 - Button One page back and Button Home 2.3 - Display in Home page
9One page back
10 Return always to Home page 11 INFO: see at page 26

5
2.4 - Menù Set up

6
Menù Set up

7
Set parameters
Save changes
Menù Set up
If change language, it is necessary to remove and insert RJ plug, to store
changes.

8
1Connecting to the net (select Icon Net)
2Wait and select the dened Net
3Wait for connection to dened Net, access to
WI-FI Password and digit.
Wait for WiFi - Web
The serial number (GP) is already set at the
bench testing boiler
link Uybox to smartphones
(Wi device)
4Once installed and start Uy APP (*) from WiFi
device,
5Link Serial Number of the boiler indicated in
Uy BOX on WiFi device.
6
Wait few seconds, on the display of Uy BOX
will show a random code xxxxxx (**)
in the box Pairing.
7
This code must be reported on the WiFi device.
At this point my WiFi device is correctly linked
to the boiler
(*)
Uy APP at the moment is in testing phase,
It is released on demand from post-sales ofce.
Soon it will be available on the Store and Unical
site.
2
1
5
6
Uy APP (*)
Menù Set up

9
At every boiler lighting, UFLY BOX scans devices, if
new devices are recognized, such as:
hcm /
bcm
Heating / Burner Control Manager
System manager / Cascade
shc Slave Heating Controller
Multifunction module
bmm Burner Modul Manager
They are displayed on the next screen, and is
prompted to save the new conguration.
Icon scanning devices
Icon save new conguration
Detected Device
Not installed device
Device previously detected, but not detected
at the moment .
2.5 - Menù Device

10
BMM / HCM Parameter
List of parameter in par. 4.2 instruction manual of the
boiler
To change the parameters is required password.
Hystorical Error
Clean display with Button Clear.
Menù Device