Bosch D9412GV4 User manual

Control Panels
D9412GV4/D7412GV4
en Owner's Manual

Table of contents
1Introduction 8
1.1 About documentation 9
2Keypads overview 11
2.1 Identify your keypad style 11
2.2 Keypad cleaning 12
3Points 13
3.1 What is a point? 13
3.2 Controlled points 13
3.3 24-hour points 14
4Areas 15
4.1 What is an area? 15
5Warning displays and tones 16
5.1 Keypad quiets for keystrokes 16
5.2 Silence the alarm tone 16
5.3 Entry delay tone and display 17
5.4 Exit delay tone and display 17
5.5 Keypress tones 18
6How the system reports events 19
7Alarm events 21
7.1 Priority of events 21
7.2 Fire alarms 21
7.3 Gas alarms 23
7.4 User and burglary alarms 24
Control Panels Table of Contents | en 3
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

8Trouble events 26
8.1 Fire trouble events 26
8.2 Gas trouble events 26
8.3 User and burglary trouble events 27
8.4 System trouble events 27
9Cleared events are not lost 28
10 View faulted or bypassed points 29
11 B94x Keypad operation overview 30
11.1 Main display area 32
11.2 Ribbon bar overview 36
11.3 Status indicators overview 38
11.4 Feature key 39
12 B93x keypad operation overview 40
12.1 Keys overview 42
12.2 Display overview 43
12.3 Status indicators overview 44
13 B94x/B93x menu tree and commands 46
14 B94x/B93x On/Off menu 50
14.1 All On menu 50
14.2 Part On menu 54
14.3 Off menu 57
14.4 Extend Closing 60
14.5 Bypass 62
15 B94x/B93x Status menu 64
15.1 View Area Status 64
15.2 View Point Status 65
15.3 Send Status Report 66
4en | Table of Contents Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

16 B94x/B93x Actions menu 67
16.1 Reset 67
16.2 Outputs 69
16.3 Test 70
16.4 RPS 74
16.5 Go to area 77
16.6 Firmware 78
16.7 Service bypass 79
16.8 Access menu 80
17 B94x/B93x Users menu 86
17.1 Change Passcode 86
17.2 Add User 88
17.3 Edit User 94
17.4 Delete User 98
18 B94x/B93x Settings menu 99
18.1 Watch Mode 99
18.2 Date/Time 101
18.3 Schedule (SKEDs) 102
18.4 Keypad 104
19 B94x/B93x Shortcuts menu 109
20 B94x/B93x Events menu 110
20.1 View Event Memory 110
20.2 Clear Event Memory 111
20.3 View Log 112
21 B92x keypad operation overview 114
21.1 Keys overview 117
21.2 Display overview 119
Control Panels Table of Contents | en 5
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

21.3 Status indicators overview 120
22 B91x Keypad operation overview 122
22.1 Keys overview 124
22.2 Display overview 125
22.3 Status indicators overview 125
23 B92x/B91x menu tree 127
24 B92x/B91x On/Off menu 131
24.1 All On menu 131
24.2 Part On menu 135
24.3 Off menu 138
24.4 Extend Closing 140
24.5 Bypass menu 142
25 B92x/B91x Status menu 144
25.1 View Area Status 144
25.2 View Point Status 145
25.3 Send Status Report 146
26 B92x/B91x Actions menu 147
26.1 Reset 147
26.2 Outputs 149
26.3 Test 150
26.4 RPS 156
26.5 Go to Area 159
26.6 Firmware 160
26.7 Service Bypass 161
26.8 Access menu 162
27 B92x/B91x Users menu 168
27.1 Change Passcode 168
6en | Table of Contents Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

27.2 Add User 170
27.3 Edit User 176
27.4 Delete User 180
28 B92x/B91x Settings menu 181
28.1 Watch Mode 181
28.2 Date/Time 183
28.3 Schedule (SKEDs) 185
28.4 Keypad 187
29 B92x/B91x Shortcuts menu 191
30 B92x/B91x Events menu 192
30.1 View Event Memory 192
30.2 Clear Event Memory 193
30.3 View Log 194
31 Options 195
31.1 Two-man Rule 195
31.2 Early Ambush 196
31.3 Security system limitations 198
31.4 Cross points 200
31.5 Fire safety and evacuation 201
31.6 Multiple area systems 203
Glossary 211
Control Panels Table of Contents | en 7
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

Introduction
Security systems help to secure life, property, and
investments against fire, theft, and bodily harm. The
keypad is an advanced digital device that offers a variety
of features not available with other systems. Its highly
visible, back-lit display and built-in sounder alert you to
a number of system events. Stylish design and ease-of-
use make it ideal for property protection.
Your security company can program the system to meet
your individual needs. Your property is given its own
English language description that appears in the display.
Contact your security company should problems be
encountered during testing of the system.
Your alarm company is:
Call before test:
______________________________________________________
1
8en | Introduction Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

About documentation
This owner’s manual covers basic and advanced
functions. This manual is designed as an everyday
reference for system users. The functions described in
this manual are programmed by your security company.
Your system might not include all of the functions
described. Some functions require you to enter your
personal passcode.
Manual organization
–Section 2. Helps you identify your keypad style.
– Sections 3 through 6. Covers the general operation
of each keypad style.
– Sections 7 through 14. Examines security system
basics.
– Sections 15 through 22. Covers how to use B94x/
B93x keypads.
– Sections 23 through 30. Covers how to use B92x/
B91x keypads.
– Section 31. Explains optional features and security
system recommendations and limitations.
1.1
Control Panels Introduction | en 9
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

Manual conventions
Throughout this manual, the # symbol refers to a
variable numerical quantity, such as the number of
points to test or exit delay time.
Text that shows on the keypad’s display appears in this
manual in italics. Text that appears in this manual in
brackets [ ] instructs you to press the corresponding
icon/key on your keypad.
Copyright
This document is the intellectual property of Bosch
Security Systems, Inc. and is protected by copyright. All
rights reserved.
Trademarks
All hardware and software product names used in this
document are likely to be registered trademarks and
must be treated accordingly.
10 en | Introduction Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

Keypads overview
Identify your keypad style
Take note of which keypad you own so that you can
read the appropriate instructions.
GAS
A1 Lobby
Ready to turn on
1
4
7
ESC
GHI
PQRS
0CMD
9WXYZ
6MNO
3DEF
2
5JKL
8TUV
ABC
NEXT
HELPPREV
Area 1 Off
A1 Lobby
Ready to turn on
<Shortcuts Menu>
GAS
1
4
7
ESC
GHI
PQRS
0CMD
9WXYZ
6MNO
3DEF
2
5JKL
8TUV
ABC
A1 Lobby
1
4
7
ESC
GHI
PQRS
0CMD
9WXYZ
6MNO
3DEF
2
5JKL
8TUV
ABC
NEXT
HELP
PREV
Ready to turn on
B94x B93x
B92x B91x
2
2.1
Control Panels Keypads overview | en 11
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

Keypad cleaning
Use a soft cloth and non-abrasive cleaning solution to
clean your keypad (for example, microfiber cloth and
eyeglass cleaner). Spray the cleaner onto the cloth. Do
not spray directly onto the keypad.
2.2
12 en | Keypads overview Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

Points
What is a point?
The term point refers to a detection device, or group of
devices connected to your security system. Points show
individually at the keypad with their names. The point
name can describe a single door, motion sensor, smoke
detector, or an area such as Upstairs or Garage. There
are two basic types of points, controlled and 24-hour.
Controlled points
Controlled points respond to alarm conditions
depending upon whether the system is turned on
(armed) or turned off (disarmed). Controlled points are
programmed to respond instantly to alarm conditions or
to provide a delay for you to reach the keypad and turn
your system off. There are two types of controlled
points, part points and interior points.
Part points
Part points often include the exterior doors and
windows of the building (the perimeter). When you turn
your system Part On, you only turn on (arm) the part
points.
3
3.1
3.2
3.2.1
Control Panels Points | en 13
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

Interior points
These points often include interior forms of burglary
detection devices, such as motion sensors or interior
doors. When you turn your system All On, you turn on
(arm) both part points and interior points.
24-hour points
24-hour points are always on (armed), even when your
security system is turned off (disarmed). There are two
types of 24-hour points, fire points and non-fire points.
Fire points
Fire points exclusively monitor fire detection devices.
They are always on (armed) and cannot be turned off
(disarmed). You can clearly distinguish fire points from
other non-fire points at the keypad.
Non-Fire points
Non-fire 24-hour points are always on (armed) and you
cannot turn them off (disarm). Panic buttons, hold up
buttons, low temperature sensors, and water sensors
are examples of devices that are typically monitored by
non-fire 24-hour points.
3.2.2
3.3
3.3.1
3.3.2
14 en | Points Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

Areas
What is an area?
An area is a number of points that are grouped together
so that you can control them together as one unit. For
example, if a security system protected a building with
three sections – an office, a laboratory, and a cafeteria –
the points in each of those sections could be grouped
together as an area. With each section being its own
area in your security system, you can turn them on
(arm) and off (disarm) individually, in groups (office and
laboratory, for example), or all together.
4
4.1
Control Panels Areas | en 15
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

Warning displays and tones
The keypad emits several distinct tones and shows text
to alert you to system events. Additional bells or sirens
may also be connected to your system. Bells or sirens
mounted on the exterior of the premises alert neighbors
to emergencies and provide an audible guide for police
and fire fighters.
The keypad has status icons that show the status of the
system. For more information, refer to the status icons
overview section.
Keypad quiets for keystrokes
Pressing any key on the keypad lights the keys and
quiets any warning tones. If you do not press another
key within 20 seconds, the keypad lights go out and the
warning tones resume.
Silence the alarm tone
The audible alarm sounds for a specific period of time
before it automatically shuts off. To silence the alarm
before the time expires, simply enter your personal
passcode and press [ENTER].
5
5.1
5.2
16 en | Warning displays and tones Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

Entry delay tone and display
When you enter a system that is on (armed) through a
point programmed for entry delay, the keypad emits the
entry delay tone as a reminder to turn off the security
system.
Failure to turn off your security system before the entry
delay time expires might sound the burglary tone and
could result in an alarm report being sent to your
security company.
Your security company programmed the entry delay
times for you:
My entry delay time is: _______________________________
Exit delay tone and display
When you first turn on (arm) your system (using your
keypad or keyfob), the keypad emits the exit delay tone,
shows Exit Now!, and counts down the exit delay time.
The tone pulsing rate increases during the last 10 sec of
exit time.
If you exit and re-enter before exit time expires, the exit
delay timer restarts the countdown. The restart only
applies once.
5.3
5.4
Control Panels Warning displays and tones | en 17
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

Your security company programmed the exit delay times
for you:
My exit delay time is: _______________________________
Keypress tones
The keypad sounds the keypress tone (a short beep)
when you press any key. Use the Settings menu to
enable/disable the keypress tone.
Invalid entry (error tone)
The invalid entry tone follows the keypress tone when
the keypress completes an invalid entry.
Some entries require one keypress. Other entries
require a series of two or more keypresses.
5.5
5.5.1
18 en | Warning displays and tones Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.

How the system reports
events
Your security system makes repeated attempts to send
reports to your security company. In the event your
security system fails to communicate, the keypad
sounds the trouble tone and the keypad shows a
communication failed message. Notify your security
company of the communications failure.
If your telephone, internet, or cellular service is
interrupted, your security system cannot send reports
to the security company unless an alternate means of
transmitting the reports exists.
For telephone communication, your security company
can program your security system to automatically
disconnect the telephones when sending reports to the
security company. Once the report finishes, the security
system returns the telephones to normal operation
(check with your security company).
Consult with your installer to determine if your security
system is configured with a communicator delay. A
communicator delay aborts reports to your security
6
Control Panels How the system reports events | en 19
Bosch Security Systems, Inc. 2014.04 | 05 | F.01U.287.176

company if the control panel is disarmed within 30 to
45 seconds after a burglary alarm is triggered. Note that
fire-type alarms are always reported without a delay.
Consult with your installer to determine if your security
system is configured with a cancel feature. If you silence
a non-fire alarm before the alarm sound timer expires,
your security systems sends a cancel report to your
security company.
Consult with your installer to determine if your security
system is configured with a swinger shutdown feature
for non-fire alarms and trouble events. After a
programmable number of alarm or trouble events, your
security system automatically bypasses points.
If your telephone service includes the call waiting
feature, your security company can configure your
security system so that call waiting does not interfere
with alarm reporting. Be sure to notify your security
company if you enable call waiting. A system that is
configured for call waiting cannot report alarms
correctly when call waiting is disabled. If you disable
call waiting after your system has been configured for it,
be sure to notify your security company.
20 en | How the system reports events Control Panels
2014.04 | 05 | F.01U.287.176 Bosch Security Systems, Inc.