Uniden DCT646-2 Series Product information sheet

(see back
,,q
_ iiiiiiiiiiiiiiiiiiiii,
),,,,,,,,,,,,,,,,,,,,,,,,,,,,
__J, ,,,
,,, _, _;t?' ,,,,,,,,,,,,,,I'
J,t ,_,
_r÷:©
:III::IIII.....
,,,,,,,,,,,,,,,,,,,,,

Make sure your cord[ess phone's packaging includes the
fo[[owing items (the number of items may vary depending on
mode[ number within the series).
If any of these items are missing or damaged, contact the
Uniden Parts Department.
•Base Unit
• Handset(s)
• AC Adapter(s)
•Rechargeab[e Battery Pack(s)
•Telephone Cord
•Belt Clip(s)
•Owner's Manua[
•Other Printed Materia[s
Uniden Parts Department at [phone]
Hours: M-F 8:00 a.m. to 5:00 p.m. CST.
or visit our website at
www.uniden.com for replacement parts.
TO INSTALL THE HANDSET BATTERY
(see page 12 for detaits)
Charge the handset battery pack
for at least I5-20 hours before
using your new cordless telephone
for the first time! _/_/I
Use only the Uniden rechargeahle
battery pack supplied with your
new phone.
z_
Remove the cover, z _J
Connect the battery pack BLA_,__y_,
connector with the correct
potarity and listen for a
dick to insure connection.
Replace the cover.
Use only the Uniden AC adapter
supplied with your new phone.
Ptug the AC adapter
cord into the base _ _'_r_:il
unit and thenintoa __i _/ /"[_
120V AC out[et.
Place the handset in :::
the base and charge _.o co_,_t
continuousty for _'°_ ..... _L.._
15 - 20 hours before
using the phone. ACadapter
(supplied}
www.uniden.¢om QUICK REFERENCE GUIDE [1]

When the handset battery pack is fu[[y charged (after 15-20
hours of charging), p[ug the telephone cord into the base unit
and then into a telephone wa[[jack.
Your phone is set for tone dialing. If your focal network
requires pulse dia[ing, p[ease see "D. Choose the dia[ing mode"
on page 15.
TO SET CALLERID ON CALLWAITING AND CALL
WAITING DELUXE
For a[[ Handset Menu Setup options, refer to page 21.
Press menu/del in standby mode.
Press rJllg//vol//A or rJllg//vol//v to select G i ,.-_,._i
VSet.ijF and then select/_.
Pressring/vol/^ or ring/vol/v to select _Z:][)_Z:_I[.i and
then select/_.
Press ring/vol/^ or ring/vol/v to select _Z:Jill_ I]__,"I]:_,i,I[)::,:_
,-,_- ,-.u ,-,_-....,-.ur.,v,-,-,'.z. or l':l.;i ljf'f'.."L:l._.IL.'.')'::ljf'" and
then select/_.
TO SET LANGUAGE
Press menu/del in standby mode.
Pressring/vol/^ or ring/vol/v to select Ha_idseti
Sef..ijp and then select/_.
Pressring/vol/^ or ring/vol/v to select Langu._ge
and then select/_.
Press rJng/vol/v to choose a language
and then select/_.
@@@@
[2] QUICK REFERENCE GUIDE www.uniden.com

Aseg0rese de que haya recibido los siguientes articu[os en e[
paquete ([a cantidad de articu[os puede variar dependiendo de[
n0mero de[ mode[o dentro de [a serie). Si a[guno de estos
articu[os fa[ta o est_ da_ado, comuniquese con e[ departamento
de partes de Uniden.
•Base
• Receptor(es)
•Adaptador(es) CA
• Paquete(s) de pi[as recargab[e(s)
•CaMe te[ef6nico
• Pinza(s) para [a correa
• Manual para e[ usuario
•Otros impresos
1
Uniden Parts Department |
Te[_fono: [phone] |
Horas: de Lunes a Viernes desde [as 8 a.m. hasta [as 5:00|
p.m., hora centra[ |
0 visitenos en nuestra p_gina Web en www.uniden.com |
para conseguir [as partes de reemp[azo. |
)
Para instalar la pila del receptor
(Consutte [a pSgina 12 para mSs detattes)
Cargue el paquete de baterfa to pila
par lo menos de 15 6 20 boras antes
de conectarlo auna lfnea telef6nica.
Use solamente el paquete de pilas
recargable de Uniden suministrado
con su nuevo tel_fono.
Quite [a tapa. _
Conecte e[ enchufe de[ Neg__ _._
paquete de [as pitas con [a
potaridad correcta y
escuche por un ctic para
asegurar [a conexi6n.
Reponga [a tapa.
Use solamente el adaptador CA
de Uniden suministrado con su
nuevo telEfono.
Conecte e[ cabte de[
Q adaptador CA [a base
en
Yde[Ueg°120v.enuna toma CA
Antes de usar e[ :::
tet6fono, co[oque e[ F_A_ _cA •
receptor en ta base y AIOO
c_rgue[o continuamente Adoptodo,CA
por 15-20 horas. I_mi.io.odol
www.uniden.¢om Guia de referencia r_pida [3]

Cuando e[ paquete de pi[as de[ receptor est# tota[mente cargado,
despu#s de una carga de 15-20 horas, conecte e[ cable te[ef6nico
en [a base y [uego en e[ enchufe te[ef6nico de [a pared.
Su te[_fono est_ programado para marcar por tono. Si su red
local requiere [a marcaci6n por pu[so, por favor consu[te "D.
Se[ecci6n de[ modo de marcaci6n" en [a p_gina 15.
Para programar las opciones de identificaci6n
de llamadas de llamadas en espera y llamada en
espera de lujo
Para todas [as demos opciones de programaci6n en e[ menO,
consu[te [a p_gina 21.
O pri.ma yin,g_/.,vol,/_o ring/Ivol,/v para se[eccionar [a
r ._,_,.< .__,,_,u__,, [uego select/_.
Oprima ring/vol/A oring/vol/v para se[eccionar
I] ] [)I]i.,i, y[uego select/_,
_ Oprima ring/roll^ o rring/vol/v para se[eccionar C:i.,i
Ac.t. y1-:i.,i[.'..% A,:.t., L:i.,.iA,:.t. YL:i.,i[.'..::.::APg, o L:i.,i AFg YI_-:i.,.i[:,%
AFg, y[uego select/_.
Para programar el lenguaje
Oprima menu/del en e[ modo de espera.
Oprima ring/Ivol/IA oring/Ivol/Iv para se[eccionar [a
p r.c,gr. rec.eF.t.,:,.r., y [uego select/_.
_ Oprima ring/veil^ oring/vol/v para se[eccionar e[
Le.rigua.Je, y [uego select/_.
Q Oprima ring/vol/v para escoger e[ [enguaje,
y[uego select/_.
menu/del en e[ modo de espera.
[4] Guia de referencia rfipida www.uniden.com

Contents
QUICK REFERENCE GUIDE
WELCOME/FEATURES/TERMINOLOGY
CONTROLS AND FUNCTIONS
DISPLAY AND ICONS
GETTING STARTED
Setting up the Phone
Mounting the Base Unit on aWaLl
About the Menu Options
Setting up the Menu
BASICS
Making and Receiving Calls
PLacing a CaLLon HoLd
RediaLing a CaLL
Adjusting the Handset Ringer, Earpiece and Speaker VoLume
Mute Microphone
Tone DiaLing Switch-over
TraveLing Out-of-Range
CLarity Booster
Privacy Mode
Find Handset
FLash and CaLLWaiting
Using One Touch Voice Mail Access
PHONEBOOK
Phonebook
Storing Phone Numbers, Names, Distinctive Rings,
and Speed Dial
Steps for Entering Names and Special Characters
Viewing the Phonebook
Making CaLLs Using the Phonebook
Speed DiaLing
Editing or Erasing a Stored Name,
Phone Number, Distinctive Ring, and Speed Dial
www.uniden.com
1Chain DiaLing
6 CALLER ID
CaLLer ID and CIDCW (CaLLer ID on Cai[ Waiting)
8 Viewing the CaLLer ID List
10 DeLeting a CaLLer ID Message
Using the CaLLer ID Message List
11 CaLLWaiting DeLuxe Features
11 EXPANDING YOUR PHONE
16 Expanding Your Phone
18 Connecting the Charger
21 Register the Handset to the Base
28 Using the DirectLink Mode
28 Room Monitor
29 3-Way Conferencing
30 Intercom/Call Transfer Feature
31 RepLacing the Base
32 ADDITIONAL INFORMATION
32 Changing the Digital Security Code
32 InstaLling the BeLtc[ip
33 Headset Installation
33 Note on Power Sources
34 Maintenance
34 Genera[ Information
35
36 TROUBLESHOOTING
36 Liquid Damage
PRECAUTIONS & WARRANTY
36
38 I.C. NOTICE
40 INDEX
41
41 MEMORY LIST
42
43
44
44
45
46
47
48
49
49
49
50
51
51
52
52
53
54
54
54
54
55
55
56
57
59
6O
62
63
64
[5]

Welcome Congratulations on your purchase of the Uniden Multi-Handset Cordless System telephone. This
unit is different from conventional cordless telephones. When the base unit is connected to AC
power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can
establish a 3-way conference ca[[ (2 handsets and an outside line), while two other handsets are
making an intercom ca[[. You can now place a fully featured cordless handset anywhere in your
home or office where AC power is available to connect the handset chargers.
Note: Some illustrations in this manual may differ from the actual unit for
explanation purposes.
_ s an Energy Star ® Partner, Uniden has determined that this product or product
models meets the Energy Star ® guidelines for energy efficiency.
Energy Star ® is a U.S. registered mark.
Note: Energy Star ® applies to DCT646 only.
Features • 2.4GHz Frequency Hopping Spread Spectrum
• 4 Multi-Handset Expandabi[ity
• Hands Free Speakerphonein the Handset
•Ca[[ Waiting Deluxe
• Caller ID/Ca[[er ID On Ca[[ Waiting
• 100 Dynamic Memory Location (Phonebook & Caller ID)
• Trilingual Handset Display Menus (English, French, and Spanish)
• Ca[[ Transfer between Handsets
• 20 Distinctive Ring Options (10 ringer tones and 10 melody ringers)
• Mute Feature
• Hash and Pause
• 88 Channe[Auto Scan
• DirectLink TM Mode
• Voice Mail Access
• Room Monitoring Feature
• Battery Level Indicator
• Clock Display
[6] WELCOME/FEATURES/TERMINOLOGY www.uniden.¢om

ThisseriesfeaturesincludeAutoTalk TM and AutoStandby TM. AutoTa[k allows you to answer a ca[[ by just removing
the handset from the cradle so you don't have to waste time pushing buttons. AutoStandby allows you to hang up by
simply returning the handset to the cradle.
To protect you against mis-bi[[ed ca[Is, which might result from your phone being activated by other equipment, this
series has Random Code TM digital security, which automatically selects one of over approx. 130,000 digital security
codes for the handset and base.
Frequency Hopping Spread Spectrum (FHSS) technology improves ca[ling range and clarity, and eliminates cross talk.
Because it rapidly changes transmission frequencies within the 2.4GHz bandwidth, this cordless phone helps reduce
the possibility of eavesdropping.
DirectLink mode is used when you have 2 or more handsets. You can use your handsets as transceivers.
Be sure to visit our web site: www.uniden.com
Uniden ® is a registered trademark of Uniden America Corporation.
AutoTa[k, AutoStandby, DirectLink, and Random Code are trademarks of Uniden America.
Terminology
•Standby Mode - The handset is not in use and talk/flash has not been pressed.
•Tatk Mode - The handset is not in the cradle and talk/flash or speaker has been pressed enabling a dial tone.
Taik appears on the display.
www.uniden.¢om WELCOME/FEATURES/TERMINOLOGY [7]

Controls & Functions
6
7
8 --
9
10
11
12
13
14
15
16
17
18
19
22
i. Handset Antenna
2. Headset Jack Cover
3. Be[tc[ip Hole
4. Hands-Free Speaker
5. Handset Battery Compartment
6. New Message LED
7. Handset Earpiece
8. LCD Display
9. Menu/del (de[ete) Key (P. 21 /P. 30, 42, 46)
10. (_ (ring)/vol(vo[ume)and^/v(P.31/P.21)
a. ringer and volume control b. scroll keys for display screen
11. _/tone/_- Key (P. 22 /P. 32 /P. 39)
12. _redial/pause Key (P. 30/P. 28)
13. _ speaker Key (P. 28)
14. Select/_ (voice mail) Key (P. 21 /P. 35)
15. Call id (Caller ID) key (P. 45)
16. End Key (P. 28)
17. Talk/flash Key (P. 28 /P. 34)
18. #/--> Key (P. 22 /P. 39)
19. _ (Phonebook) Key (P. 36)
20. Mold/transfer/int'com (Intercom) Key (P. 29 /P. 53 /P. 52)
21. Handset Microphone
22. Handset Charging Contacts
[8] CONTROLS & FUNCTIONS www.uniden.¢om

!27 1
28
23.Base Antenna
24.Base Charging Contacts
25.Charge LED
26.Find handset Key (P. 34)
27.TEL LINE Jack
28.DC IN 9V Jack
29-
31
For DCT646-2 only
29.Charging Contacts
30.Charge LED
31.DC IN 9V Jack
30
www.uniden.com CONTROLS & FUNCTIONS [9]