Uniden App Cam Home+ User manual

App Cam Home+
Quick Start Guide

What’s in the Box
Screw Kit
x1
Power Adapter
App Cam Home+
x1
Mounting Plate
x1
Quick Start Guide
x1
Mounting Template
x1
x1
Reset Needle
x1
1

2
General Introduction
Blue LED Status
Blinking: Network connection failed/Network is not congured.
On: Camera is starting up/Network connection succeeded.
Built-in Mic
Status LED
Lens
Reset Button
Note: Rotate the lens to nd the reset
button and SD Card Slot
Press and hold for more than 5 seconds
to restore the device to factory settings
Speaker
Power Port
Light Sensor
Micro SD Card Slot

3
Install Uniden Solo App
Set up the Camera
There are two ways to get the Uniden Solo App:
• Search “Uniden Solo” in App Store (for iOS),
download and install the app.
• Search “Uniden Solo” in Google Play (for Android),
download and install the app.
Please follow the prompt tone to
congure the camera
Camera has been started
up. Please run app, add the
camera and set it up.
1. Please tap the “ ” button in the
top right corner to add the camera.

4
2. Scan the QR code on the
bottom of the camera.
3. Tap “Choose WiFi
Connection” to continue.
Note:
If you prefer network cable
connection, tap “Choose Network
Cable Connection”. Please plug in
the power cable and the ethernet
cable (not included) before ac-
cessing the camera and follow the
prompts on the screen.
You have the option to set up WiFi
connection eventhough you use
cable connection. You can skip
the WiFi settings by tapping “ I
prefer to use Ethernet cable.”.
When the setup for the camera
has completed, your family can
access the camera simply by
tapping “Have WiFi Congured
or Network Cable Connected”
without reconguring it.

5
4. Select “I have heard the voice prompt”
and tap “Next” to enter the next page.
If you did not hear the voice prompt, please
press “I didn’t hear the voice prompt” for help.
5. Enter the Wi-Fi password of the selected
Wi-Fi network and tap “Next” to continue.

6
6. Tap “Scan Now” to proceed. A QR code will be generated on the phone. Please place the QR
code on your phone towards App Cam Solo Pro camera’ lens at a distance of about 20cm to let
the camera scan the QR code. Please make sure that you’ve ripped the protection lm of the
camera’s lens.
Note: To help scanning, please tap the QR code to display in full screen
Scan succeeded. Camera is connecting to the router. Please wait.

7
7. If you hear the above voice prompt, please
press “I heard ‘Wi-Fi connection failed’ ”
for help.
Connection to the router failed!
8. If you hear the above voice prompt, please
press Select “I have heard the voice prompt”
and tap “Next” to enter the next page.
to nish the quick setup.
Connection to the router succeeded.

8
9. Create a password (at least 6 characters), name the camera and set the DST time. Then start live
view or go to “Device Settings” for more congurations.
Note:
“Name your camera” eld refers to the display name of the camera rather than the login username.

9
Device Menu
Menu
Add New Device
Device Settings
Access Live View