Uniden BTS150 User manual

BTS150 High-Definition
Speaker
Haut-parleur haute
définition BTS150
Questions? Problems?
Get help on the web at www.uniden.com
or call our Customer Service line at 800-292-2294.
Questions? Problèmes?
Obtenez de l’aide au www.uniden.com
ou en communiquant avec le soutien à la clientèle au 800-292-2294.

2 - English
Table of Contents
Important Safety Instructions .................. 3
BTS150 HIGH-DEFINITION SPEAKER ......... 3
What’s Included.........................................4
SET UP YOUR BTS150 SPEAKER ................. 4
Charge the Battery...................................4
Turn on Your Speaker ..............................5
Pair Bluetooth Devices to
Your Speaker..........................................5
GETTING TO KNOW THE BTS150 SPEAKER 7
BTS150 Top..................................................7
BTS150 Back................................................8
LEDs...............................................................9
BTS150 SPEAKER OPERATION ................. 10
Basic Cell Phone Operations.............. 10
Basic Music Operation ......................... 12
SPECIAL FEATURES ................................... 13
Play Music through a Wired
Connection ......................................... 13
TROUBLESHOOTING................................. 14
SPECIFICATIONS ....................................... 16
Compatibility .......................................... 16
One-Year Limited Warranty...................... 18

English - 3
Important Safety Instructions
•Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or laundry tub, in a wet
basement or near a swimming pool.
•Do not use this product while driving.
•Use only the power cord and batteries indicated in this manual. Do not expose the battery (or the device) to ames or
dispose of it in a re: the battery may explode. Check with local authorities for possible battery disposal instructions.
•Do not disassemble, modify, or attempt to repair any component of this product.
•Check the laws and regulations on the use of mobile phones and hands-free equipment in the areas where you drive.
Always give full attention to driving and pull o the road and park before making or answering a call if driving conditions
require.
SAVE THESE INSTRUCTIONS!
BTS150 HIGH-DEFINITION SPEAKER
Uniden’s BTS150 high-denition Bluetooth speaker provides clear stereo sound in a
compact, portable package. With Bluetooth V2.0 compatibility, the BTS150 pairs with your
cell phone to become a speakerphone for hands free conversations. You can also connect
your music player (wired or wireless) for crisp, clear audio.

4 - English
•Bluetooth V2.0.
•Up to 2 Bluetooth devices can be paired with your speaker.
•Supporting A2DP/AVRCP/HFP/HSP proles.
•Portable
•Up to 5 hours of play from a fully-charged battery.
•Up to 33 ft (10 m).
•Call Waiting feature
The BTS150 speaker is not a data storage device; do not attempt to copy files to it.
What’s Included
•BTS150 Speaker
•AC Adapter (ZDA050100US) with USB cable.
SET UP YOUR BTS150 SPEAKER
Charge the Battery
1. Slide the main power switch to the ON position (see page 8).
2. Insert the adapter’s mini USB connection into your speaker’s USB slot (see page 8).
3. Plug the adapter into your computer.

English - 5
4. The LEDs ash blue while the battery is charging (charge time = 7.5 hours on a
completely empty battery). The LEDs turn solid blue when the battery is fully charged.
Your battery must be fully charged before you can use your speaker.
Turn on Your Speaker
When you turn on your speaker for the rst time, it automatically goes into pairing mode.
The LEDs rapidly ash red and blue while in pairing mode. After you pair Bluetooth devices
to your speaker, the next time you turn it on it searches for these paired devices and then
moves into a standby state.
1. Slide the main power switch to the ON position.
2. Press and hold for at least 3 seconds. A “power on” tone sounds.
3. The LEDs ashes blue and red slowly while looking for Bluetooth devices. It remains
steady on (blue) when Bluetooth devices are discovered; otherwise, it keeps ashing.
Pair Bluetooth Devices to Your Speaker
Make sure your speaker has been fully charged and is in pairing mode.
Pair First Bluetooth Device
Pair your rst Bluetooth device to your speaker when you turn your speaker on for the rst
time. Be sure your speaker is in pairing mode (see page 6).
1. Select a Bluetooth V2.0 device (mobile phone or music player) to pair.

6 - English
2. Select the Searching mode on your Bluetooth device (refer to your Bluetooth device’s
owner’s manual for details if necessary).
3. Your Bluetooth device should nd BTS150; select it and use 0000 for a pairing code if
necessary.
4. Verify that you are connected to your speaker. The Bluetooth LED moves to a steady ON
state when pairing is complete.
Pair Second Bluetooth Device
When you want to pair the second Bluetooth device:
1. Turn on your speaker.
2. Press and hold until your speaker beeps twice.
3. Release . The BTS150 is ready to pair.
4. Follow the same procedures for pairing your rst Bluetooth device (see page 5).

English - 7
GETTING TO KNOW THE BTS150 SPEAKER
BTS150 Top
TALK/PLAY
POWER
FORWARD
UP
DOWN
REVERSE
LEDs (2)
Key name Icon Press to ...
ReveRse
Rewind or skip back in music.
PoweR
•Turn your BTS150 speaker on/o.
•Press and hold to register devices.
Down
Decrease the volume.
FoRwaRD
Fast forward or skip ahead in music.

8 - English
Key name Icon Press to ...
Talk/Play
–Handle phone calls and play music.
–Press and hold to register devices.
NOTE: This key can also turn your BTS150 speaker on and off.
UP
Increase the volume.
BTS150 Back
Main Power
Switch
USB Charge
Port
3.5 mm
Audio In
Use this... To...
Main power switch turn main power on and o.
USB charge port connect your speaker to the AC adapter.

English - 9
Use this... To...
3.5 mm Audio In connect non-Bluetooth devices.
LEDs
Two LEDs on the front of your speaker provide visual cues to dierent processes.
Color State Meaning
Blue
On Power is on.
Flashing Slow ash - Battery is charging.
Fast ash - Lost Bluetooth connection.
Red On Bluetooth is connected but the battery level is low.
Flashing Power almost gone and Bluetooth is not connected.
Blue and Red Flashing Pairing mode.
LED O Power is o.

10 - English
BTS150 SPEAKER OPERATION
When you want to turn on your speaker, remember to slide the main power switch to the
ON position.
Press and hold for at least 3 seconds.
The and keys control the speaker’s volume level during cellphone operation and
music playback. Press and release the keys to increase or decrease the volume level one
step at a time. Press and hold and to quickly raise and lower the volume levels.
Your speaker sounds an alert tone when it reaches the maximum upper and lower volume
levels.
Basic Cell Phone Operations
When you have an incoming call, the speaker sounds an incoming call tone and the LEDs
ash blue. Both the speaker and your cellphone may ring, depending on your cellphone
settings.
To... Do this...
Answer an incoming call Press any key.
Reject an incoming call Press and hold .
End a call Press .