Uniform Wares 351/br-01 User manual

OFFICE ADDRESS:
Studio 12A,
Broadway Market Mews,
London E8 4TS, England
TELEPHONE:
[phone]
EMAIL:
[email protected]
[email protected]
wholesale@uniformwares
WEBSITE:
www.uniformwares.com
COMPANY DETAILS
Uniform Wares Limited
Company Number 7187255
User Manual
351 Series
351/br-01
setting the time
1Adjust the watch crown (a) situated on the side of the
case at the 3 o’clock position out from the Operating
Position to Set Position by pulling outwards where the
crown is fully extended
at the second adjustment click.
2Turn the crown anti-clockwise to the desired time, do
not turn the crown clockwise.
3When the time is set, push the crown back to the
Operating Position.
Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.
setting the date
1Pull the watch crown out from the Operating Position to
set Position 1 [p1] where the crown (a) is half extended at
the rst adjustment click.
2In Set Position 1 [p1] turn the crown clockwise until the
correct date is displayed
3When the date is set, push the crown back to the
Operating Position. The watch will resume.
Please note: The date should be set before 12 noon so that
the calendar indicator changes in sync at twelve midnight
and not 12 noon.
Please note: Whilst the crown is in the Set Position 1 [p1]
or 2 [p2]the watch is not moisture resistant.
351/br-02
setting the time and day
1Adjust the watch crown (a) situated on the side of the
case at the 3 o’clock position out from the Operating
Position to Set Position 2 [p2] by pulling outwards where
the crown is fully extended at the second adjustment
click, the second hand will stop clicking.
2Turn the crown anti-clockwise to the desired time, do
not turn the crown clockwise.
3When the time is set, push the crown back to the
Operating Position.
Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.
setting the date
1Pull the watch crown out from the Operating Position to
set Position 1 [p1] where the crown (a) is half extended at
the rst adjustment click.
2Turn the crown clockwise to set the date and anti-
clockwise to display the desired day. Please note: Your
watch has a dual language day display but will only
function according to the language you have set.
3When the date and day are set, push the crown back
to the Operating Position. The second hand will resume
ticking.

OFFICE ADDRESS:
Studio 12A,
Broadway Market Mews,
London E8 4TS, England
TELEPHONE:
[phone]
EMAIL:
[email protected]
[email protected]
wholesale@uniformwares
WEBSITE:
www.uniformwares.com
COMPANY DETAILS
Uniform Wares Limited
Company Number 7187255
User Manual
351 Series
351/rg-01
setting the time
1Adjust the watch crown (a) situated on the
side of the case at the 3 o’clock position out
from the Operating Position to the Set Position
by pulling outwards, you will hear a click and
the second hand situated at the 6 o’clock position will
stop ticking.
2Turn the crown clockwise to the desired time, do not
turn the crown anti-clockwise.
3When the time is set, push the crown back
to the Operating Position.
Please note: Whilst the crown is in the Set Position the
watch is not moisture resistant.

OFFICE ADDRESS:
Studio 12A,
Broadway Market Mews,
London E8 4TS, England
TELEPHONE:
[phone]
EMAIL:
[email protected]
[email protected]
wholesale@uniformwares
WEBSITE:
www.uniformwares.com
COMPANY DETAILS
Uniform Wares Limited
Company Number 7187255
User Manual
351 Series
wristwatch care
Your Uniform Wares timepiece requires a certain amount
of care, the following guidelines will enable you to ensure
its reliability and protect its appearance over time.
cleaning
Please use a clean, lint free cloth with warm
water and if required a mild detergent diluted
in water to remove any dirt from the case.
To clean the lens please use a clean chamois cloth. Avoid
submerging the watch case in water.
battery
Your timepieces power source is a Swiss made cell which
has an estimated lifespan of 36 months. When your
battery requires replacing please refer to the Uniform
Wares website www.uniformwares.com/service for
information on battery replacement.
leather bracelets
Your leather bracelet is made from naturally tanned calf
leather which over time will develop an inherent, natural
patina that improves with age. Nevertheless we suggest
you limit the bracelets expose to moisture and avoid
complete submersion into water which will signicantly
deteriorate the quality and feel of bracelet.
When a replacement bracelet is required, please refer to
the Uniform Wares website www.uniformwares.com for
information on replacements and tting.
rubber bracelets
After long periods of use your rubber bracelet may require
cleaning . To do so please use a clean cloth and a mild
detergent diluted in warm water to clean the aected
areas. For more persistent marks use a soft bristle brush
to gently clean the aected areas with a detergent diluted
in warm water. Avoid submerging the watch case
in water.
water resistance
This watch is designed to withstand everyday use and
has a 5ATM water resistance rating. Exposure to high
humidity and light rain showers are acceptable however
you should avoid wearing the watch whilst showering,
swimming, diving or during any other activity where
it may subjected to abnormal water pressures or
environments where abnormal heat and moisture are
present (ie ‘Saunas’ or ‘Hot Tubs’). This combination may
have a negative aect on the seals and gaskets of the
timepiece.
condensation
If your timepiece experiences a sudden change in
temperature or pressure, a slight condensation may
appear under the crystal of your watch. This mist will
disappear by itself and will not aect the functioning
of your timepiece. If the condensation persists please
contact place of purchase.
guarantee
This Uniform Wares product is guaranteed against
defects in materials and workmanship under normal use
for a period of two years from the date of retail purchase
by the original end-user purchaser.
If a hardware defect arises within the warranty period
please refer to the Uniform Wares website
www.uniformwares.com/service for information on the
repair procedure for your particular timepiece.
items not covered under guarantee
- Wristwatch case, lens or back plate tarnished
through general wear and ageing of the product.
- Battery
- Bracelets /Straps
- Damage caused by accident, misuse or lack of care
- Defect of internal or external components due
to contact with water or moisture
Please Note: This Guarantee shall be deemed
void if the case of the timepiece has been opened
for inspection or service, dismantled or repaired
by anyone but an authorised Uniform Wares
service centre.