Unilevel Ung6001 User manual

Green Cross Line Laser Instruction Manual

The UNG6001 is an auto levelling cross line green laser with a class 3r <5mW output. The laser

produces an ultra bright vertical and horizontal laser cross line. The UNG6001 is ideal for all man-

ner of internal t out applications. The laser comes with a magnetic mounting base which also

allows the laser to mount on to either a survey or camera style tripod if required. The laser is

Soft Carry Bag

Laser Output

Magnetic Mount with

5/8” and 1/4” Tripod Mounts

Locking Switch

Operation

First insert batteries in to the battery holder located in the battery compartment. The battery holder takes 4 “AA”

batteries (preferably Alkaline) take care to insert in the correct direction as indicated. Insert the holder back into the

battery compartment making sure the three round terminals are inserted rst to contact the three internal spings in

the battery compartment.

The UNG6001 can be operated with or without the mounting bracket. To power up the laser simply ick the locking

switch to the on position. Both the vertical and horizontal laser will illuminate at the same time.

www.redbacklasers.com.au

UNG6001

Green Cross Line Laser

Control Panel

The UNG6001 has an out of level alarm which comprises of a loud beeping sound and the lasers ashing. This indi-

cates the laser is outside of self levelling range. To get into range place the laser on a more level surface. Once in

self leveling range the beeping and ashing will stop and the laser lines will be solid. The UNG6001 is auto levelling

so as long as the unit is within self leveling range then the laser will accurately level, there is no need to make sure

the surface the laser is on is perfectly level.

The UNG6001 features pulse mode which allows the laser to use an OPTIONAL suitable line receiver allowing outdoor

use over a 40m range (suitable line receiver the RedBack LLR705). To enable pulse mode simply power the laser

up as normal and then press the P button on the control panel, you will see the lasers dim slightly. A suitable laser

receiver will now be able to pick up the laser line.

This laser also features manual mode. This allow the laser line to be turned on without self levelling, thus allowing

you to set the laser level on any angle you wish. This is handy for ballustrades etc. A camera style pan and tilt tripod

makes this easier to set. To enable manual mode press the right manual mode button WITHOUT unlocking the pen-

dulum switch. The lasers will turn on without ashing.

Warranty Information – CMI Industries Pty Ltd

The Principles behind our warranty.

• Duration of warranty is xed and automatic, when we advertise 1 year on a particular model, its two years. No drop down to a lesser time if you forget to register, registration is NOT

required just proof of purchase showing date. Please check your specic model for duration of warranty, see the end of this document.

• Although the duration of our warranties are for a particular period it does not mean we will charge you for a genuine warranty failure a month or two outside that warranty period, we

believe in a fair go.

• Even though a product shows signs of accidental damage, scratches and the like, we will not automatically fail the warranty claim, if the fault is NOT caused by a drop or misuse and is

a genuine warranty failure then we will cover it.

• Our aim is to return repaired or replaced products as soon as possible as we know that being without your tool can be inconvenient. Our goal is a 72 hour turnaround (3 working

days) after receiving it. Sometimes, however, a product with an intermittent fault may need extended testing to make sure we have made a full repair.

• Calibration is not covered by warranty much the same as the wheel balance on your car is not covered by warranty.

Now The Details and Legals

CMI Industries Pty Ltd provides consumers with a warranty to our products, this is in addition to the requirements of any relevant legislation such as the Competition and Consumer Act 2010.

Denitions:

“CMI”, “We” or “Our” refers to CMI Industries Pty Ltd (ABN 29 102 713 922) of Unit 2 181-183 Thompson Rd, Bell Park, Victoria 3215 ph 1800 769 858

“You” or “Consumer” refers to the initial purchaser of the product.

“Product” refers to goods manufactured by or for CMI Industries Pty Ltd under the brands of RedBack Lasers, Level1Laser and UniLevel and include Laser and Optical Levels, Measuring tools and

accessories.

“Material” refers to material or component used in the construction and manufacture of the product.

“Workmanship” refers to handling, assembly and manufacturing processes done by or for CMI Industries Pty Ltd in order to manufacture the products.

“Warranty Period” varies depending on brand and model sold by CMI please see table at end for your products warranty period. Warranty period is from original purchase date only, no extension is

made in the event of warranty replacement products being supplied or time spent being repaired.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other

reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

CMI warrants that our products will be free from defects in material and workmanship for the stated period for the product supplied (see “warranty period” following)

CMI promises to repair or replace, free of charge, the product or part of product if found to be faulty due to defective workmanship or materials within the duration of the warranty stated as long as

the following terms and conditions are met;

• Product must not have been misused or abused, must not have incurred accidental damage or had un-authorised repair or tampering that has caused or contributed to its fault or

failure.

• You must contact CMI by phone, mail or email immediately when a fault or defect has become apparent and within the warranty period.

• Product must be returned to store of purchase or directly to CMI, we will cover cost of postage only when sent by our reply paid Australia Post service (Australian Mainland and

Tasmania only) details provided upon phone, post or email with us.

• CMI will cover cost of freight back of repaired or replaced product to original purchase store or you directly (depending on how it was sent Australian Mainland and Tasmania only).

• CMI will determine whether repair or replacement of product or part of product will be made on the merits of each case.

• Further exclusions in this warranty include damage or defect caused by use of non-original accessories or parts, damage in transportation, normal wear and tear, damage through

moisture, damage due to electric surge, failure due to neglect or damaged caused by adjustments not outlined in CMI’s instructions.

Subject to the requirements of all applicable Australian Acts or legislation and to the extent permitted by law, CMI accepts no liability (whether expressed or implied) of any nature whatsoever for

any loss of earnings, hiring of replacement equipment, Inaccurate work carried out by the consumer or agent, damage or injury arising as a result of any fault in the product. It is the consumer’s

responsibility to maintain good working practices and regularly test their tools for accuracy and serviceability.

Calibration of the product is not covered by warranty subject to the requirement of all applicable Australian Acts or legislation and to the extent permitted by law.