CONGRATULATIONS
CongratulationsonyourchoiceofawatchbyUNION
GLASHÜTTE/SA.®-aGermanbrandamongthemost
renownedandwiththerichesttraditions.
Thisexceptionallydesigned,undeniablyattractivetimepiece
alsohasasuperiordesignquality.Usingonlythehighestvalue
materialsandcomponents,yourUNIONGLASHÜTTE/SA.®
watchisprotectedagainstshocks,temperaturevariations,
wateranddust.
Itssapphirecrystalhasadoublesidedanti-reflectivecoat-
ing,anditisdrivenbyamechanicalmovementchronograph
UNG-27.01withautomaticwindinganddatecorrectorat
10o'clock.
Toensureperfectandaccuraterunningformanyyearsto
come,werecommendyouattentivelyfollowtheadvicegiven
intheseinstructions.
We hope youwillbevery pleased with yourUNION
GLASHÜTTE/SA.®timepiece !
USE
Winding
Crown in position I, not pulled out
Manualwindingisnecessaryifyouhavenotwornyourwatch
forsomeconsiderableperiodoftime.Torestartit,youonly
needtoturnthecrownafewtimes(clockwise),ortotilt
yourwatchfromsidetosideafewtimes.Torestoreyour
watch's60hourpowerreserve,around40turnsofthe
crown(forward)arerequired.
Whenwearingyourwatch,theautomaticdevicewindsit
everytimeyoumoveyourwrist.
Notes
Theaccuracymaybeinfluencedbythewearingconditions.
Thereisnostopofthecrownatfullwinding.
Setting the time
Crown in position II, pulled out
PullthecrownouttopositionIIcarefully;thesecondshand(3)
willstop.Turnthecrownforwardsorbackwardstosetthe
desired time, and then push it back into the rest position I.
Oncethehourhandpassesthe12o'clockposition,youcan
seeifitisindicatingmidnight(datewillchange)ormidday
(datewillnotchange).
Advice on how to synchronise your watch
To synchronise the seconds hand (3)withanofficialtime
signal(radio/TV/Internet),pulloutthecrowntopositionII;
thesecondshandwillstop.Atthesignal,pushthecrownback
into the rest position I.
Rapid date correction
Pressthecorrectorasmanytimeasneeded(5)tomovethe
discforwarduntilthedesireddate(4)isdisplayed.During
this operation, your watch will continue running, so the time
willnotneedtobere-set.
Important
Rapid date correction is impossible between 8.30 p.m. and
11.30 p.m.
Chronograph function
Press the Start/Stop push-button (10) to start the
chronograph.PresstheStart/Stoppush-button(10) again to
stopit.ThechronographwillresumeiftheStart/Stoppush-
button (10) is pressed again (added times), or the three
chronograph hands (6, 7and 8)willreturntozeroifpush-
button (11)ispressed.
www.union-glashuette.com U-27.01_EN/2015
U-27.01