Unior 1693RP User manual

uniorbiketools.com
Pro road repair stand, with plate
Profesionalno cestno stojalo, s ploščo
909620105
Beam
Nosilec kolesa
Beam Suport
Podpora nosilca kolesa
T-Clamp
T kos
Quick release dropout lock
Adapter za vpenjanje kolesa
1693RP
EN
SLO
Unior d.d.,Kovaška cesta 10, 3214 Zreče, Slovenia, T: [phone], F: [phone], [e-mail]

3
5
98
4 6
10
7
10.1
A
IHGFEDCB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
A
IHGFEDCB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
A
IHGFEDCB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
A
IHGFEDCB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
A
IHGFEDCB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
A
IHGFEDCB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFEDC
B
J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFEDC
B
J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFEDC
B
J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFEDC
B
J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFEDC
B
J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFEDC
B
J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
2
AIHGFED
C
B J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFED
C
B J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFE
D
CB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
A
IHGFEDCB J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
AIHGFEDC
B
J LK M
LUTSRPONM V XZ Y
087654321 9 !- ?
1
Navodila za sestavo profesionalnega cestnega stojala:
1. Privijte ogrodje stojala na ksno ploščo s priloženimi vijaki (1)
2. Odprite ročico na zgornji drsni cevi (2A) in vstavite t-kos vanjo
(2B) ter zaprite ročico, da jo pričvrstite.
3. Vstavite nosilec kolea (3A) skozi podpornik nosilca kolesa (3B) in
privijte vijak pod podpornikom nosilca kolesa, da ga ksirate(3C).
4. Namestite adapter za vpenjanje kolesa (4A) na nosilec kolesa in
ga pričvrstite s privitjem vijaka pod njim (4B).
Nastavitve profesionalnega cestnega stojala:
5. Nastavitev višine stojala
Za nastavljanje višine stojala sprostite ročico (6C) in nastavite
zgornjo cev na želeno višino (6D)
6. Nastavitev naklona stojala
Za nastavljanje naklona nosilca kolesa odprite ročico na vrhu
pomične cevi (7A) in nagnite nosilec kolesa (7B) v želeni položaj.
Zaklenite nosilec kolesa v želenem položaju z zapiranjem ročice.
7. Obračanje nosilca kolesa
Odprite ročico na t-kosu (8A) in obrnite nosilca kolesa (8B) v želeni
položaj. Zaprite ročico, da zaklenete stojalo v novem položaju.
8. Nastavljanje položaja nosilca kolesa
Za nastavljanje nosilca kolesa naprej in nazaj odvijte vijak pod
podporo nosilca kolesa (9A) in nastavite nosilec kolesa (9B)v želeni
položaj. Privijte vijak, da nosilec kolesa ostane v novo nastavljenem
položaju.
9. Nastavitev položaja adapterja za vpenjanje kolesa
Za spreminjanje položaja adapterja za vpenjanje kolesa odvijte
vijak pod adapterjem (10A) in ga namestite v želeni položaj (10B)
ter privijte vijak.
10. Nastavitev adapterja za vpenjanje kolesa
Za vpenjanje vilice cestnega kolesa v stojalo nastavite adapterje,
kot prikazuje slika 11.
10.1. Za vpenjanje zadnjega dela cestnega kolesa v stojalo
adapterje nastavite, kot prikazuje slika 11.1.
Pro road stand assembly:
1. Screw the main frame of repair stand to the xed plate with
screws provided with the stand (1)
2. Open lever on upper sliding tube (2A) and insert t-clamp into it
(2B). Secure it in place with closing the lever.
3. Insert the main beam (3A) through beam support (3B). Lock it in
place with tightening the knob on beam support (3C)
4. Install the Quick release dropout lock (4A) on main beam and
secure it in place with tightening the knob (4B)
Pro road stand adjustment:
5. Adjust bike stand height
To adjust the bike stand height release the lever (6C) and adjust
the top tube (6D).
6. Adjust bike stand angle (tilt)
To adjust the angle of the main beam, open the lever on top of
upper sliding tube (7A) and tilt main beam (7B) in desired direction.
Close the lever when the desired angle is reached.
7. Rotation of the main beam
Open lever on T-Clamp (8A) and rotate main beam (8B) to desired
position. Close the leaver to lock main beam in new position.
8. Adjusting main beam
To adjust beam back and forth loosen the knob under the main
beam support (9A) and slide beam (9B) to desired position. Tighten
knob to lock the main beam in position.
9. Adjusting quick release dropout lock
To adjust quick release dropout lock back and forth loosen the
knob under the quick release fork mount (10A) and slide it to
desired position (10B). Tighten knob to lock the quick release fork
mount in place.
10. Quick release dropout lock
To mount the fork of the bike with quick release system on Pro road
stand, adjust the adapters on quick release dropout lock as shown
on the picture 11.
10.1. To mount the back end of the bike with quick release system
on Pro road stand, adjust the adapters on quick release dropout lock
as shown on the picture 11.1.
SLOENG
4x