2. How to connect it with Smart TV/Raspberry
Pi (Windows/Android System):
3.Touchpad become unstable /insensitive or
when typing the letter, they are on the screen.
Charge battery for several hours and wireless
connection is good enough.
4.No response or need to press several times from
a long distance.
To make sure signal is strong enough, or operate this
keyboard a bit closer to the target device
plug and use. Just plug the USB receiver into
the USB port of the device.
stuck
FAQ
1.
“ ” “ ”
The computer can not recognize the USB receiver?
If n
o reaction or unwanted disconnection with the
keyboard Please plug the USB receiver into the USB
port in the computer and press FN then RF
simultaneously on the keyboard ( LED director will blink).
The indicator will go off a few seconds later ,which
means the keyboard is paired with the receiver then.
5.The multi media keys can't work
Update player version or install relevant driver.
It's same with Logitech
6. Other needs beyond above query, please
contact us at
All questions would be answered within 24 hours.
One Year Limited Warranty From iPazzPort
sales@unisenonline.com.cn
Note:
1.For Windows 7,it would take about one minute to
install driver automatically after you insert in the
USB receiver.
2.the keyboard and the USB receiver are well-
paired in the factory.
5
note: (if you got model A charging cable)
To reduce RF signal interference caused by TV metal
case , please use the supplied extend USB cable
