Unitech MS120 User manual

1
Contents
Setup Procedures …………… 2
Batch Setup …………… 3
Bar Code Setup Menu …………… 4
1 Device Selection and Default
…………… 4
2 Beep and Delay …………… 6
3 Keyboard Wedge …………… 8
4 RS232 Serial Setting …. 10
5 Scanner ………….. 12
6 Data Format ………..… 14
7 Symbologies(I): Code 39/I2 of 5/
S2 of 5/Delta Distance
Code/Code 32 ..………… 16

2
8 Symbologies(II): Code 128 /
MSI / Code 93 / Codabar /Label
Code ………….. 18
9 Symbologies(III): UPC/EAN
………….. 20
Function Code for PC .… 22
Function Code for MAC …. 24
Function Code for IBM Terminal
………..… 26
Full ASCII Table ………….. 28
Test Chart …………………... 34
Setup Procedures
1) Locate a group that contains the
parameters to be changed.
2) Scan the “Enter Group” label. The
Reader will sound 3 beeps to indicate
that setup is in progress.
3) Scan the label representing the
parameter to be changed.
4) Scan the labels representing the
parameter values.

3
5) Repeat the above two steps, if
necessary, to change the parameters in
the same group.
6) Scan the “Exit” label to end the
group currently selected. The Reader
will sound 2 beeps.
7) Repeat the procedure for other
groups, if needed, which include the
parameters to be changed.
Batch Setup
Having configured a scanner, you may
duplicate the settings of the scanner
(master) to the others. You can do this
by producing a set of custom setup
labels derived from the master scanner
and scanning these labels by other
scanners.
The following label is called “dump
settings” label. Scan that label, the
settings of a scanner will dump to the
screen as one or several ASCII
string(s). Printing the string(s) into bar
code labels in Code 39, you get the
batch setup labels to duplicate other
scanner.
Dump Settings

4
Bar Code Setup Menu
1 Device Selection and Default
Enter Group 1
Group Default
0
1
23
45
67
89
Factory Default
Exit

5
Keyboard Wedge Reader
Device
ID Device Type
00 IBM PC/XT
01 IBM PC/AT, PS/2 mod 40, 60,
80 etc.
02 IBM PS/2 MOD 25, 56, 70, 90
19 IBM 5550-5P
20 IBM 5550-6P
08 IBM 3196/3197 122 Keys
10 IBM 3476/3477 122 Keys
09 IBM 3179/3471/3472
11 IBM 3486/3487
06 Keyboardless Wedge
03 Macintosh ADB bus
RS-232 Reader
Device
ID Device Type
04 RS232 Serial Decoder
Wand Emulation Reader
Device
ID Device Type
05 Wand Emulation (Native Mode)
07 Wand Emulation (Code 39 Mode)

6
2 Beep and Delay
Enter Group 2
Group Default
0
1
23
45
67
89
F5 (%VE)
Exit

7
Beep Tone
(On Decoding): A1
0None 3High
1Low 4Low to High
2Medium 5High to Low
Beep Tone
(On ACK): A2
0None 3High
1Low 4Low to High
2Medium 5High to Low
Inter-Character
Delay: A3
01 ms 320 ms
15 ms 450 ms
210 ms 5100 ms
Inter-Block Delay:
A4
010 ms 3500 ms
150 ms 41 second
2100 ms 55 seconds

8
3 Keyboard Wedge
Enter Group 3
Group Default
0
1
23
45
67
89
Review
Exit

9
Function Code:
B1
0Off 1On
Upper/Lower
Case: B2
0Lower Case 1Upper Case
Function Code:
B3
0US
1UK
2Swiss
3Swedish
4Spanish
5Norwegian
6Italian
7German
8French
9Alt Key Mode

10
4 RS232 Serial Setting
Enter Group 4
Group Default
0
1
23
45
67
89
Review
Exit