Unitech MS852N User manual

MS852N 2D Imager Barcode Scanner
Quick Start Guide
Version 1.0
608709G
Connecting the Scanner
* ：Default Option
Connect USB cable to the USB port of a host PC.
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more information.
Factory Default
USB Device Type
Scan Mode
Product Information
USB CDC
USB HID-KBW
Aiming On /Off
Trigger mode
Sense Mode*
Continuous Mode
Normal *
Off
Good Read LED
Good Read LED ON *
Good Read LED OFF
Enable/Disable
All Prefixes/Suffixes
Enable All Prefixes/Suffixes
Disable All Prefixes/Suffixes
Barcode Programming
Before starting scanning any setting barcode,
please do follow the instruction below.
Scanning the Enter Setup barcode can enable the engine to
enter the setup mode. Then you can scan a number of programming
barcodes to configure your engine. To exit the setup mode,
scan the Exit Setup barcode.
Enter Setup Exit Setup *
USB HID-POS
Always On
A trigger pull activates a decode session.
The engine activates a decode session every time it detects a barcode presented to it.
The engine automatically starts one decode session after another.

Quick Start Guide
* ：Default Option Version 1.0
608709G
MS852N 2D Imager Barcode Scanner
Thank you for purchasing the unitech product.
For other product documentation, please scan the QR code for more information.
Portugal
Sweden
Russia
Belgium
Austria, Germany
UK
Turkey_Q
Turkey_F
France
Finland
Spain
Norway
Italy
Denmark
Japan
United States*
Good Read Beep
Beeper Volume
Medium Tone*
High Tone
Extra Low Tone
Medium Volume
High Volume*
Good Read Beep Frequency
USB Country Keyboard Types
On
*
Off
Low Volume
Low Tone