Unitech Rh768 User manual

Data Collection Terminal

- RH768 -

User’s Manual

400897G Version 1.0

Preface

About This Manual

This manual explains how to install, operate and maintain the RH768 Rugged

Mobile Computer.

No part of this publication may be reproduced or used in any form, or by any

electrical or mechanical means, without permission in writing from the

manufacturer. This includes electronic or mechanical means, such as

photocopying, recording, or information storage and retrieval systems. The

material in this manual is subject to change without notice.

Unitech global website address: http:\\www.unitech-adc.com

Bluetooth is a registered trademark of Bluetooth SIG.

Microsoft, Windows and ActiveSync are either

registered trademarks or trademarks of Microsoft

Corporation. Other product names mentioned in this

manual may be trademarks or Registered

trademarks of their respective companies and are

hereby acknowledged.

Unitech is a member of Oracle Embedded Software

Licensing Program.

iii

Regulatory Compliance Statements

FCC Warning Statement

This equipment has been tested and found to comply with the limits for a Class B dig-ital

device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

–Reorient or relocate the receiving antenna.

–Increase the separation between the equipment and receiver.

–Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

–Consult the dealer or an experienced radio/TV technician for help.

1. This Transmitter must not be co-located or operating in conjunction with any other antenna

or transmitter.

2. This equipment complies with FCC RF radiation exposure limits set forth for an

uncontrolled environment. To maintain compliance with FCC RF exposure compliance

requirements, avoid direct contact to the transmitting antenna during transmitting.

3. Any changes or modifications (including the antennas) made to this device that are not

expressly approved by the manufacturer may void the user’s authority to operate the

equipment.

FCC Label Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause

undesired operation.

RF Radiation Exposure Statement

For body worn operation, this phone has been tested and meets FCC RF exposure guidelines

when used with an accessory that contains no metal and that positions the handset a minimum

of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF

exposure guidelines.

Canadian Compliance Statement

This Class B Digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet appareil numerique de la classe B respecte les exigences du Reglement sur le material

broilleur du Canada.

European Conformity Statement

Declaration of Conformity with Regard to the R&TTE 1999/5/EC and EMC 89/336/ EEC

directives.

RoHS Statement

This device conforms to RoHS (Reduction Of

Hazardous Sub-stances) European Union

regulations that set maximum con-centration limits

on hazardous materials used in electrical and

electronic equipment.

TaiwanNCC Warning Statement

交通部電信總局低功率電波輻射性電機管理辦法 (930322)

根據交通部低功率管理辦法規定：

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更

頻率、加大功率或變更原設計之特性及功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應

立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之

無線電通信。

低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

Laser Information

The Unitech RH768 series is certified in the U.S. to conform to the requirements of

DHHS/CDRH 21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2

products are not considered to be hazardous. The PA600 series contains internally a Visible

Laser Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the

above regulations. The scanner is designed so that there is no human access to harmful laser

light during normal operation, user maintenance or during prescribed service operations.

The laser safety warning label required by the DHHS/IEC for the PA600 series' optional laser

scanner module is located on the memory compartment cover, on the back of the unit.

CAUTION! Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous laser light. Use of optical instruments with

the scanner will increase eye hazard. Optical instruments include binoculars,

microscopes, and magnifying glasses. This does not include eyeglasses worn by

the user.

Battery Notices

The Unitech RH768 is equipped with a Lithium-Ion Battery Pack and a Backup Battery.

However, the RH768 may not start without an external power source due to battery discharge

after extended storage periods To charge the battery to full capacity, connect the RH768 to an

external power source with the USB Charging Cable or the Unitech RH768 Cradle. Initially

charge the RH768 for at least 16 hours.

The Backup Battery will receive power from an external power source, or through the main

battery (But, only if the main battery has adequate power). In order to prevent data loss due to

Backup Battery failure, connect the RH768 to the main Battery Pack or an external power

source.

NOTE: Turn the RH768 Backup Battery Switch to the ON position before initial use.

Rechargeable batteries are advised to replace every year or when 500 charge/discharge

cycles achieved to guarantee optimal performance. It is normal that the battery balloons or

expands beyond one year or the maximum of 500 cycles.Although it does not cause harm, it

cannot be used again and must be disposed of according to the location's safe battery disposal

procedures.

If the performance decrease of greater than 20% in a Lithium-Ion battery, the battery is at the

end of its life cycle. Do not continue to use, and ensure the battery is disposed of properly.The

length of time that a battery power lasts depends on the battery type and how the device is

used. Conserve the battery life through the following:

 Avoid frequent full discharges because this places additional strain on the battery. Several

partial discharges with frequent recharges are better than a deep one. Recharging a

partially charged lithium-Ion battery does not cause harm because there is no memory.

 Keep the lithium-Ion battery cool. Avoid a hot car. For prolonged storage, keep the battery

at a 40% charge level.

 Do not leave the lithium-Ion battery discharged and unused for an extended period

because the battery will wear out and the longevity of the battery will be at least shorter

than half of the one with frequent recharges.

Battery charge notice

It is important to consider the environment temperature whenever the Lithium-Ion battery pack

is charged. Charging is most efficient at normal room temperature or in a slightly cooler

environment. It is essential that batteries are charged within the stated range of 32º F - 104ºF

(0°C - 40°C). Charging batteries outside of the specified range could dam-age the batteries

and shorten their charging life cycle.

CAUTION! Do not charge batteries at a temperature lower than 0°C, which will increase the

internal resistance to cause heat and make the batteries unstable and unsafe.

Please use a battery temperature detecting device for a charger to ensure a safe

charging temperature range.

Storage and safety notice

Although charged Lithium-Ion batteries may be left unused for several months, their capacity

may be depleted due to build up of internal resistance. If this happens they will require

recharging prior to use. Lithium-Ion batteries may be stored at temperatures between -4Fº -

140Fº (-20°C to 60°C); however, they may deplete more rapidly at the higher temperature

ranges. It is recommended to store batteries within normal room temperature ranges.

Warranty

The following items covered under Unitech Limited Warranty are free from defects during

normal use:

 RH768 – 1-year limited warranty.

 Lithium-Ion battery – 6-month limited warranty.

Warranty becomes void if equipment is modified, improperly installed or used, dam-aged by

accident or neglect, or if any parts are improperly installed or replaced by the user.

Use only the adapter supplied. Using the wrong adapter may damage the unit and will void the

warranty.

vii

Table of Contents

PREFACE

About This Manual....................................................................................................................i

Regulatory Compliance Statements........................................................................................iii

FCC Warning Statement.....................................................................................................iii

FCC Label Statement..........................................................................................................iii

RF Radiation Exposure Statement......................................................................................iii

Canadian Compliance Statement........................................................................................iii

European Conformity Statement.........................................................................................iv

RoHS Statement .................................................................................................................iv

TaiwanNCC Warning Statement..........................................................................................iv

Laser Information....................................................................................................................iv

Battery Notices .......................................................................................................................iv

Battery charge notice.......................................................................................................... v

Storage and safety notice.................................................................................................... v

Warranty.................................................................................................................................vi

CHAPTER 1

Getting Started .........................................................................................................................1

Introducing the RH768............................................................................................................1

Package Contents ..................................................................................................................2

Tour of the New RH768 ..........................................................................................................3

Setting up the RH768 .............................................................................................................5

Installing the Battery Pack...................................................................................................5

Charging the Battery...........................................................................................................7

LED Status..........................................................................................................................8

Checking the Battery Status................................................................................................8

Connecting the RH768 to a PC...........................................................................................9

Turning the RH768 on for the First Time.............................................................................9

Using the Stylus....................................................................................................................10

viii

CHAPTER 2

Using the Hardware................................................................................................................13

Using Function Keys.............................................................................................................14

Toggle to Alpha Mode and CAPS .........................................................................................14

APPENDIX I

System Specification.............................................................................................................15

APPENDIX II

Worldwide Support ................................................................................................................17

Chapter 1

Getting Started

Introducing the RH768

Thanks for purchasing the RH768 handheld terminal. The RH768 was designed for RFID

5.0 for easy integration. The RH768 has a battery life of up to 16

nectivity options include WLAN 802.11b/g and Bluetooth. It has an IP64 rating and

luetooth Connectivity

iztalk and Oracle Sensor Edge Server

 Support 860~960 MHz

 Support EPC G2 and ISO 18000-C Tag

mobile applications.

RH768 UHF

Unitech’s RH768 UHF handheld terminal is a rugged dual technology multi-tag UHF RFID and

bar code reader. It can read both EPC Gen 2 RFID tags and comes with embedded RFID

middleware and Windows CE

hours. Con

4' (1.2 meter) drop threshold.

Features

 Built-in 1D or 2D Bar Code Scanner & UHF RFID Read

 IP64 Rated and 4' Drop Threshold

 Windows Embedded Handheld 6.5 Operating System

 WLAN 802.11b/g and B

 RFID Middleware, supporting Microsoft B

Package Contents

Make sure the following items are in the Unitech RH768 box:

RH768 Terminal Manual CD

Power Adapter Battery Pack

Synchronization and Power Cable

Please contact a regional Unitech service representative if anything is missing or appears

damaged.

Tour of the New RH768

Front View

No. Component Description

1 Status indicator

Indicates battery and bar code scanning status.

Green - Battery charge is complete or a bar code is

successfully captured.

Red - Battery is charging, bar code scanner is activated

and processing.

2 LCD touch screen Displays the applications and data stored on the device.

The screen is touch-sensitive and responds to the stylus

or finger.

3 Microphone Receives Sound.

4 Power button Press this button to start the RH768.Alternatively, this

key must be pressed down for at least two seconds to

turn off the RH768.

5 Receiver Receives the audio signal of a phone call.

6 Scanner trigger button Press to activate the Bar Code Laser Scanner.

7 Keypad Keypad interface for controlling the RH768. See the

Using the Hardware chapter for more information.

Rear View

No. Component Description

8 Stylus Remove the Stylus from its holder and hold it like a

pen.

9 Bar Code Scanner Window Scans bar codes.

10 Infrared (IR) Port Uses infrared technology to transmit and receive data

from other IR-enabled devices.

11 Left Scanner Trigger Button Press to activate the bar code laser scanner.

12 Reset Button Use a paper clip to press the Reset Button.

13 Bar Code Scanner Trigger Press to activate the Bar Code Scanner.

14 Battery Compartment Houses the removable and rechargeable 7.4V

Lithium-Ion 4050mAh Battery Pack.

15 Strap Hook Secures the strap to the RH768.

16 RFID Antenna Receives data from an RFID tag.

Bottom View

No. Component Description

17 Battery Compartment Houses the rechargeable Lithium-Ion Battery Pack.

18 Universal Connector

Connects the RH768 to the Synchronization Power

Cable, which connects to the computer’s USB Port. It

also connects to the AC Adapter, which plugs into an

external power source. This charges the device and

performs MicrosoftActiveSync operation.

Setting up the RH768

This section explains how to install and charge the battery, check the battery status, connect

the RH768 to a PC, turn on the RH768 for the first time, and calibrate the screen.

Installing the Battery Pack

WARNING! If the battery pack is handled improperly there is a risk of fire or burns. DO NOT

disassemble, crush, puncture, short external contacts, or dispose the battery

pack in fire or water. DO NOT attempt to open or service the battery pack.

Dispose of used batteries according to local recycling guidelines.

The backup battery prevents data loss when the main battery disconnects from the RH768.

This backup battery cell will support only the RH768 for a maximum of 72 hours.

NOTE:

 Charge the RH768's main battery pack for at least 16 hours.

 Turn the RH768's Backup Battery Switch to the ON position before initial use.

1. Open the Battery Compartment by sliding the tabs in the direction shown below:

2. Locate the Backup Battery Switch and turn it to the ON position.

3. Align the Battery Contacts with the Battery Compartment Contacts as shown below:

4. Place the Battery Pack into the Battery Compartment and press the battery securely into

place.

5. Replace the Battery Compartment cover, push down the tabs and slide them back into the

lock position as shown below:

Charging the Battery

Charge the RH768 for at least 16 hours before initial use. Charge the device to full capacity

after a full day of use with the Synchronization Power Cable or the Docking Station.

CAUTION! Operating the RH768 for the first time without fully charging the Backup Battery

may result in data loss stored in the RAM memory. When the main battery is

removed, the backup battery retains data in the RAM memory for 72 hours;

charge the battery as soon as possible to avoid data loss.

NOTE: Turn the backup battery switch to the ON position before charging the battery. Data

loss may occur if the Backup Battery is not properly charged.

Charging the Battery using the Synchronization Power Cable

1. Press and hold the release button on both sides of the USB charging cable and connect it

to RH768 (1).

2. Plug the AC adapter cable into the power jack of the USB charging cable (2).

3. Plug the AC adapter cord into an electrical outlet (3).

Charging the Battery with the Docking Station

1. Plug the AC Adapter cable into the Docking Station's power jack, and then connect the AC

Adapter into an electrical outlet.

Terminal LED indicators

from left to right:

-- GPRS/Bluetooth

Communication

-- Scan

-- Power

2. Slide the RH768 into the Docking Station until it

clicks into place.

3. The connection is secure when the bottom edge of

the device aligns with the docking station. (The

Docking Station's LED indicator lights up green,

while the RH768's LED indicator lights up red.)

Cradle Power/Communication

LED indicator

LED Status

LED Status Description

Flashing Yellow GPRS module is enabled.

GPRS/Bluetooth Flashing Blue Bluetooth module is

enabled.

Solid Red Ready for ReadingScan Solid Green Successful reading

Solid Red Being charged

Terminal

Power Solid Green Fully charged

Solid Green Power is on

Cradle Power/Communication Flashing Green Data synchronization is

active.

Checking the Battery Status

If the battery level becomes low in the course of normal use, a status icon appears on the

device screen indicating low or very low battery status. In both cases, perform an ActiveSync

operation to back up your data, and then recharge your device as soon as possible.

CAUTION! Once the device is shut down, you should recharge the device within 48 hours.

Otherwise you will lose all data including files stored in the RAM memory.

Connecting the RH768 to a PC

Use the Synchronization Power Cable to connect the RH768 to a PC to use Microsoft

ActiveSync.

1. Connect the USB Connector jack to the RH768 (1).

2. Plug the USB Connector into a serial port on the PC and connect the AC Adapter into the

USB Connector (2).

3. Connect the AC Adapter into an electrical outlet (3).

Turning the RH768 on for the First Time

The device is ready for use after it has been charged for at least 16 hours. Start up the device

to adjust the screen brightness, calibrate the display, and set up the system time zone, date,

and time.

Powering On

1. Turn on the device by pressing the Power Button on the front panel.

2. The Unitech RH768 welcome screen appears followed by the calibration screen.

Power Button

Using the Stylus

CAUTION! Never use anything other than the RH768 stylus on the screen.

1. Remove the stylus from its holder, as shown in the illustration below.

2. Hold the stylus like a pencil.

3. Lightly tap the tip of the stylus to make a menu choice.

4. Double-tap to open programs.

5. Use the stylus to print letters or numbers.

Calibrating the RH768 Screen

The calibration screen automatically appears when the unit is powered on for the first time or

after the system is reset.

Access the calibration screen at any time by simultaneously

pressing the FUNC and ESC keys.

FUNC Key

ESC Key

Table of contents

Other Unitech Handheld manuals

Popular Handheld manuals by other brands

Datalogic

Datalogic Skorpio user manual

HP iPAQ rx3000 series Function guide

ITRON

ITRON FC300 Getting started guide

Casio

Casio IT-800 Series user guide

RealWear

RealWear Navigator 500 quick start guide

E-TEN

E-TEN M800 user manual

Blackbe;rry

Blackbe;rry 6710 Getting started guide

Socket

Socket SoMo 650 user guide

Intermec

Intermec CN50 user manual

Honeywell

Honeywell MX9 user guide

LXE

LXE MX3Plus reference guide

Honeywell

Honeywell MX9 user guide

Janam

Janam XM66 user guide

CipherLab

CipherLab 9500PPC Reference manual

Compaq

Compaq Aero 8500 reference guide

Symbol

Symbol MC9090-G RFID User guide supplement

American Innovations

American Innovations Allegro MX user guide

Panasonic

Panasonic FZ-E1 series operating instructions

Unitech RH768 User manual

Popular Handheld manuals by other brands