Unitech HT 1 User manual

Package
Please make sure the following contents are in the HT1 series gift box.
If something is missing or damaged, please contact
your Unitech representative.
Package contents
HT1 Handheld Computer
Wrist Lanyard
Battery
Optional accessories
Extended Capacity Battery
Single Slot Cradle + Cradle Adapter
USB Cable
USB Plugs Adapter
4-Slots Battery Charger
Handheld Computer
- HT1 Series-
HT1 1D Batch / HT1 2D
Quick Start Guide
-1-
Product View ( Front View )
Product View ( Rear View )
401363G V1.1
-2-
-3-
Quick Start Guide
QR Code Card
Microphone (HT1 2D only)
Wrist Lanyard Hole

Installing the Battery
1. Turn the switch left to lock the battery cover.
Turn the switch up to unlock the battery cover.
2. You can take the battery out directly.
CAUTION!  To ensure the unit working properly, please keep all connectors
away from the contaminants staying inside of them such as dust,
grease, mud, and water. The negligence may cause the unit with
no communication, short circuited, overheated and so on.
 If the connector is damaged, please ensure the connector is being
fully repaired before using the unit to avoid causing short circuited.
http://www.ute.com/
Copyright 2022 Unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
.Keypad Definition
Key
Description
Power key
Enter key
Alpha key
Function key
Trigger Key
Escape Key
~
Alphanumeric keys
Back Key
Charging the Battery
Charge with USB
Connect the micro USB cable to the USB port at the bottom of HT1
and plug into your PC's USB port to simultaneously charge the HT1.
Or plug the AC power adapter into the electrical outlet on the USB plug.
Charge with cradle
-4-
-5-
-6-
-7-
Using Function keys
Press the function key once, it will appear a blue symbol in the
status bar at the top of the screen. Then you can refer to the following
table to execute the desired function or input.
Key
Description (Func)
Return
Home
Menu
Programmable key F1~F3
Left, Up, Right, Down cursor keys