UNITED BSC-9092 User manual
Electronic Body Fat Scale
BSC-9092
In order to get the most from your scales please carefully read and follow the
instructions provided.
Key features
●This product adopts advanced BIA (bioelectrical impedance Analysis) technology. BIA
measures body hydration and body fat percentage by sending a safe, low-level electrical
signal through the body. This signal is analyzed by a computer to determine the body fat and
hydration percentage .It is more precise than traditional calculations.
●Use of high precision sensor to obtain more exact weight.
●Use of high quality tempered glass and elegant support feet for sleek modern style.
●Personal data can be stored in the memory of the unit for up to 10 people. It is very
convenient to use.
Button operation
SET key: power on, menu select and confirm
▲Key: Up
▼Key: Down
Operation
●Open the battery cover on scale base, and install the batteries.
●Place the scale on hard flat floor. Make sure it is level.
●Under the weighing condition, when the display shows “0.0” you can press “▲”or “▼”to
choose units (kg , st ,lb).
Taking weight, Body fat & Hydration percentage Readings
Weight only:
①Tap on scale gently. The display will show “8888” then show “0.0” within 5 seconds.
②Stand on the scale upright and maintain your balance. Display will indicate your weight.
③After weighing, the scale will be auto off until further using.
Setting and storing personal data in memory
1. Set personal data
1.1 Press “set” key .Use “Up” or “Down” key to select your personal key form p0-p9.
Once you reach the personal key you wish to use, Press “SET” to confirm.
1.2 Press “▲”or “▼” to choose Male or female, then press “SET”
to conform
1.3 Press “▲”or “▼” to choose age (10-80), press “SET” to confirm.
1.4 Press “▲”or “▼” to choose height (100-240), “press “SET” to confirm.
1.5 Press “SET” to measure weight, body percentage. hydration percentage after setting
personal data.
2Taking weight and body fat & hydration percentage readings.
2.1 Stand bare foot on the scale, maintaining contact with electrodes.
2.2 Your weight will be displayed first. Continue to stand upright, and the percentage will
appear on the display, after on display, after flash “0000”
2.3 Body fat percentage and hydration rate normal ranges:
2.4 Body muscle and bone rate normal/ parameter
Energy (Kcal): The needed energy is consumed to maintain breath, keep warm and
for some other basic living activities, taking off 70% of the entire daily energy
consumption. If the metabolize is higher, people won`t get fat easier.
Because of differences in geographic areas and locations, the body fat percentage standards
and percentage standards can vary .This sheet is for reference only.
Please remember your personal key. You do not need to program personal key the next time
you use scale. You can use the personal key you have already stored.
Caution
1. Persons with pacemakers should not use this product.
2. Persons with metal implants will be unable to obtain accurate readings.
3To ensure accuracy, we suggest using the scale at the same time every night
(19:00-21:00).
4“Lo” on the scale display indicates that the battery is out of power. You should install a
new one.
5The “Err” on the scale display indicates overload scale “Err2” display indicates fat
percentage measurement error.
6If body fat percentage is less than 5%, indicator displays “FATL” If more than 50%
indicator displays “FATH” If impedance measuring makes an error, indicator will display
“Err2”.
INTRODUCTION OF USING AND INSTALLING THE BATTERIES
●Use2 PCS CR2032 lithium batteries.
●When changing the batteries, please open the battery cover on the back, put 2 PCS CR2032
lithium batteries in the battery case (make the positive poles towards), then close the battery
cover tight.
Note
1. You should place scale on clear, flat surface before use.
2. Do not place scale on wet, severely hot or extremely cold surfaces.
3. Do not jump or stomp on scale. Do not attempt to disassemble the scale.
4. To avoid falling off scale ,do not stand on the scale to avoid glass and electrode wear
out .
5. Do not ware shoes when standing on the scale to avoid glass and electrode wear out.
6. Never submerge the unit in water. Use alcohol to clean the electrodes and glass cleaner
to keep them shiny, applied to a cloth first; avoid soaps.
7. For home use only. Not for professional use. Body fat percentage and hydration
percentage is reference only. You should consult a doctor when you undertake any diet
or exercise program.
8. Check battery if scale malfunction. If necessary, install a new battery. For other problems,
please contact your local franchiser or contact our company for repair.
NOTICE ABOUT RECYCLING
Your product is designed and manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic equipment, at their end-of-life,
should be disposed of separately from your household waste. Please dispose of this
equipment at your local community waste collection/ recycling centre.
In the European Union there are separate collection systems for used electrical and
electronic products. Please help us to conserve the environment we live in!
DECLARATION OF CONFORMITY
This product complies with the requirements of the directives
EMC-Directive: 2004 / 108 / EC
declare that the BSC-9092
is in compliance with the following norms:
EN 61000-6-3:2007
EN 61000-6-1:2007
EN 61000-3-2 :2006
EN 61000-3-3 :1995+A1 :2001+A2 :2005
EXCLUSIVE IMPORTER IN GREECE:
Amiridis – Savvidis S.A.
33, Vas. Olgas avenue
P.O. 54641, Thessaloniki, Greece
Tel: +30 2310 850107, +30 2310 850108, Fax: +30 2310 867835
45, Posidonos street
P.O. 18344, Moschato, Athens, Greece
Tel: +30 210 9402064, Fax: +30 210 9402137
www.amiridis-savvidis.gr
Table of contents
Other UNITED Scale manuals
