
From a PC, Mac, Tablet or Smartphone Log In to
the HomeSet Programming Portal.
6
www.HomeSetHome.com/guru/
Password is: homeset#1
About the Status LED, Power LED and Wi-Fi LED
After the C100 Hub has been correctly installed on the Wi-Fi network, the Status
LED will be solid red (until a program is downloaded to it), the Power LED will be
blue, and the Wi-Fi LED will be one of the following colors:
Solid Blue Connected to Wi-Fi, excellent signal strength.
Solid Green Connected to Wi-Fi, good signal strength.
Solid Yellow Connected to Wi-Fi, fair signal strength.
Solid Red Connected to Wi-Fi, poor signal strength.
Blinking Red Error connecting to Wi-Fi.
If your C100 Hub is using Wired Ethernet, and has been successfully set up, the
Status LED will be red (until a program is downloaded to it), the Power LED will
be blue, and the Wi-Fi LED will be off.