Universal Remote Control UR3-EXP User manual

Universal Remote Control, Inc.
www.universalremote.com
OEE-0049A Rev 03(12/10/01)
UR3-EXP
Operating Instructions
For 3 Function
Cable Remote Control
The remote control is designed to operate the
Scientific-Atlanta Explorer 2000 and 3000
Series and the Pioneer Voyager set top boxes
and the majority of TV and VCR/DVD equipment
on the market.
Introduction
1
Default State :
Device Default: Scientific Atlanta Explorer
2000/3000 & Pioneer Voyager
Volume Default : TV volume and mute through
the TV, with the option of controlling volume and
mute through the Cable Converter. Refer to
Section Ffor programming the volume and mute
through your Cable Converter.
System On/Off button :
This button is designed to send out power
commands for two or all three devices with one
button press. Please refer to section E for details.
Operations
4
Replacing Batteries
2
Before you program or operate the remote control,
you must install two new AA alkaline batteries.
STEP1 Remove the battery compartment cover
on the back of your remote control.
STEP2 Check battery polarity carefully, and
install the batteries as shown in the
illustration below.
STEP3 Replace the battery compartment cover.
Button Functions
3
Programming the Remote Control.
5
DEVICE KEYS
DEVICE KEYS
allow you to
allow you to
turn on and off your TV, VCR, and
turn on and off your TV, VCR, and
CABLE box. They are also used
CABLE box. They are also used
to setup the remote control
to setup the remote control
INFO
INFO
displays channel and
displays channel and
program information
program information
PAGE
PAGE
moves the menu
moves the menu
forward and backward
forward and backward
one page
one page
EXIT exits out of on-screen menus
exits out of on-screen menus
CH changes the channel up and down
changes the channel up and down
A sorts the guide by time
sorts the guide by time
B sorts the guide by theme
sorts the guide by theme
C sorts the guide by title
sorts the guide by title
Consult your converter manual for more
Consult your converter manual for more
information on the on-screen guide
information on the on-screen guide
The Scientific-Atlanta Explorer
The Scientific-Atlanta Explorer
Converter has an on-screen program
Converter has an on-screen program
guide that can be sorted several
guide that can be sorted several
different ways:
different ways:
VOLUME turns the volume up and down
turns the volume up and down
FOUR-WAY
CURSOR KEYS allow you to navigate through
allow you to navigate through
the on-screen menus
the on-screen menus
FAV steps through favorite channels
steps through favorite channels
VCR/DVD KEYS perform standard
perform standard
VCR and DVD functions when in VCR mode,
VCR and DVD functions when in VCR mode,
and Video-on-Demand functions when in
and Video-on-Demand functions when in
VOD mode.
VOD mode.
VCR/VOD switches the VCR controls into
switches the VCR controls into
Video-on-Demand controls
Video-on-Demand controls
TV/VCR switches the VCR between TV and
switches the VCR between TV and
VCR mode
VCR mode
NUMBER KEYS allow direct access to
allow direct access to
specific channels and
specific channels and
menu options
menu options
GUIDE displays the program guide
displays the program guide
SYSTEM
ON/OFF send out power commands for two
send out power commands for two
or all three devices with one
or all three devices with one
button press.
button press.
MUTE turns volume off
turns volume off
LAST recalls the last channel that
recalls the last channel that
was viewed
was viewed
BYPASS switches between the cable
switches between the cable
box and TV
box and TV
SETTINGS displays current
displays current
cable box settings
cable box settings
R
AA
AA.. .. TT TThh hhrr rree eeee ee-- --DD DDii iigg ggii iitt tt CC CCoo oodd ddee ee PP PPrr rroo oogg ggrr rraa aamm mmmm mmii iinn nngg gg MM MMee eett tthh hhoo oodd dd.. ..
The remote control can be programmed by pressing in a three digit code number that
corresponds to particular manufacturers and brands of Audio/Video equipment.
The three-digit code numbers are listed in the code table of the instruction manual.
STEP1 Turn on the equipment you wish to program. (TV, VCR, or DVD)
STEP2 Press the [DEVICE] button (TV or VCR) to be programmed and the [SELECT] button
simultaneously for 3 seconds. The device LED will turn on indicating the unit is ready
to be programmed.
*Tip : The device LED will stay lit for 20 seconds. The next step must be entered while the LED is on.
STEP3 Point the remote control toward the
equipment and enter the three-digit
code number assigned to your
brand from the code tables.
*Tip : The equipment will turn off when the
correct three-digit code number has
been entered. You can verify you have
selected the correct code by pressing
the [MUTE] button, the equipment
should turn on or turn off.
*Note : If there is more than one three-digit
number listed for your brand, try one
code number at a time until your
equipment turns off.
STEP4 Store the three-digit code number
by pressing the same [DEVICE]
button once again. The device LED
will blink twice to confirm that the
code has been stored.
*Note : Try all the functions on the remote
control. If any of the functions do not
work as they should, repeat from Step 2
using the next three-digit code number
from the same brand list. Make sure
that the VCR/VOD button is in the
VCR position when using your VCR.
BB
BB.. .. AA AAuu uutt ttoo oo SS SSee eeaa aarr rrcc cchh hh MM MMee eett tthh hhoo oodd dd.. ..
If the three-digit code numbers assigned to
your brand do not turn off your equipment or
the code tables do not list your brand, you
can use the Auto Search Method to find the
correct three-digit code number for your
equipment by the following steps:
STEP1 Turn on the equipment you wish to
operate.
STEP2 Press the [DEVICE] button (TV or
VCR) to be programmed and the
[SELECT] button simultaneously for 3
seconds. The device LED will turn on.
*Tip : The device LED will light on for 20
seconds. The next step must be
entered while LED is on.
STEP3 Press the [CH+] or [CH-] button one
step at a time or keep it pressed.
The remote will emit a series of
Power ON/OFF commands. Release
The[CH+] or [CH-] button as soon as
the equipment turns off.
*Tip : You can verify that you selected the
correct code by pressing the [MUTE]
button. The equipment should either
turn on or turn off.
STEP4 Press the same [DEVICE] button
to store the code. The Device
LED will blink twice to confirm
that the code has been stored.
CC
CC.. .. TT TToo oo FF FFii iinn nndd dd tt tthh hhee ee TT TThh hhrr rree eeee ee DD DDii iigg ggii iitt tt CC CCoo oodd ddee ee
NN
NNuu uumm mmbb bbee eerr rr TT TThh hhaa aatt tt ww wwaa aass ss SS SStt ttoo oorr rree eedd dd ii iinn nn
tt
tthh hhee ee DD DDee eevv vvii iicc ccee ee.. ..
STEP1 Press the [DEVICE] button (TV or VCR)
you wish to verify and the SELECT
button simultaneously for 3 seconds.
*Tip : The device LED will turn on for 20
seconds. The next step must be
entered while the LED is on.
STEP2 Press the [INFO] button.
The device LED will blink number of times
indicating the number of each digit of the
code number. Each digit is separated by a 1
second interval of the LED being turned off.
Example : One blink, three blinks and eight
blinks with an interval of 1 second
of LED being turned off, indicates
the code number 138.
Note : Ten blinks is equal to the number 0.
DD
DD.. .. PP PPrr rroo oogg ggrr rraa aamm mmmm mmii iinn nngg gg aa aa ss ssee eecc ccoo oonn nndd dd TT TTVV VV
tt
ttoo oo VV VVCC CCRR RR MM MMoo oodd ddee ee.
STEP1 Press the [VCR] button to be
programmed and the [SELECT]
button simultaneously for 3 seconds.
*Tip : The device LED will turn on for 20
seconds. The next step must be
entered while the LED is on.
STEP2 Press the [TV] device button to
pick up the TV code table.
STEP3 Point the remote control toward the
equipment and enter the three-digit
code number assigned to your TV
brand from the code tables.
STEP4 Store the three-digit code number by
pressing the [VCR] button once again.
The device LED will blink twice to
confirm that the code has been stored.
EE
EE.. .. PP PPrr rroo oogg ggrr rraa aamm mmmm mmii iinn nngg gg tt tthh hhee ee SS SSyy yyss sstt ttee eemm mm OO OOnn nn// //OO OOff ffff ff BB BBuu uutt tttt ttoo oonn nn.. ..
This is designed to program the System
on/off button so that it can send out up to
three power on/off commands for the
devices you programmed into the remote
control.

STEP1 Press the [CBL] button.
STEP2 Press the [SYSTEM] button and the
[SELECT] button simultaneously for 3
seconds. The [CBL] button will turn
on for 20 seconds.
STEP3 Press the [DEVICE] button you wish
to store in the System On/Off button
and repeat this until you stored all
the power commands into the
System On/Off button.
STEP4 Press the [CH+] button to save the
power commands you stored. The
[CBL] button will blink twice to
confirm the saving.
FF
FF.. .. VV VVoo ooll lluu uumm mmee ee PP PPuu uunn nncc cchh hh TT TThh hhrr rroo oouu uugg gghh hh:: ::
By following the steps below, the user can
program the volume controls (Volume UP,
Volume Down and MUTE) from one device to
operate in another device mode.
The default volume control settings on the
remote control is TV volume control. If you
wish to store the CABLE volume control in
CBL mode, use the following steps.
STEP1 Press the [CBL] button and the
[SELECT] button simultaneously for
3 seconds.
*Tip :The device LED will light on for 20
seconds. The next step must be
entered while the LED is on.
STEP2 Press the [VOL +] button.
STEP3 Press the [CBL] button.
The device LED will blink twice to
confirm the programming.
To return to original state:
If you wish to restore the TV volume control in
CBL mode, repeat the above steps by
pressing [TV] in step 3.
GG
GG.. .. LL LLOO OOWW WW BB BBAA AATT TTTT TTEE EERR RRYY YY WW WWAA AARR RRNN NNII IINN NNGG GG:: ::
When the battery is low (2.0V-2.3V) and
needs to be replaced with fresh batteries,
the remote control LED will blink 2 times in
sequence whenever a [DEVICE] button is
pressed to turn on equipment.
HH
HH.. .. MM MMee eemm mmoo oorr rryy yy LL LLoo oocc cckk kk SS SSyy yyss sstt ttee eemm mm:: ::
This remote control is designed to retain
programmed memory for 10 years even
after batteries are removed from the
remote control.
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
A MARK 112 143
ADMIRAL 072 081 160 161
AKAI 070 146 004
AMPRO 073 167
ANAM 043 054 055 056 080 112 131
AOC 058 070 004 112 222
AUDIOVOX 076 103
CANDLE 070 002 003 004
CAPEHART 058
CETRONIC 043
CITIZEN 070 002 003 004 101 103 143
CLASSIC 043
CONCERTO 004
CONTEC 043 051 207 230
CORONADO 143
CRAIG 043 054 028
CROWN 043 143
CURTIS MATHES 070 004 101 143
CXC 043
DAEWOO 076 103 055 004 127 143 016 043 044
125 120 214 215 229
DAYTRON 004 143
DWIN 161
DYNASTY 043
DYNATECH 062 209
ELECTROHOME 024 076 143
EMERSON 005 028 043 048 076 096 155 004 051
143 151 153 154 216 217 230
ENVISION 070
FISHER 007 057
FUNAI 028 043
FUTURETECH 043
GE 070 073 130 144 160 161 004 008 009
034 056 074 091 155 223 224
GOLDSTAR/LG 004 106 119 110 112 113 127 143
HALL MARK 004
HARMAN KARDON
211
HITACHI 163 004 007 009 011 072 010 012 023
075 143 158 208
INFINITY 164
INKEL 129
JBL 164 209
JCP 070
TV
Remote Converter
Code No Converter Model
CABLE TV
UR3-EXP S/A and Pioneer Explorer/Voyager 001
Set-up Code Tables
6
II
II.. .. WW WWrr rrii iitt ttee ee yy yyoo oouu uurr rr dd ddee eevv vvii iicc ccee ee SS SSee eett tt-- --uu uupp pp cc ccoo oodd ddee eess ss:: ::
TV Set-up Code Number :
VCR Set-up Code Number :
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
JCPENNY 004 008 024 030 065 101 143 160 156
JENSEN 013
JVC 038 001 034 083
KENWOOD 070 001
KLOSS 002 059
KMC 219
KTV 070 043 143 154
LODGENET 072
LOGIK 072
LUXMAN 004
LXI 007 015 052 081 160 164
MAGNAVOX 070 003 004 022 059 060 061 063 064
127 164 094 160 056
MARANTZ 164 070
MATSUI 164
MEMOREX 004 007 072
METZ 088
MGA 024 070 004 042
MINERVA 088
MITSUBISHI 109 024 042 004 040 146 028 124 226
MTC 070 004 062 101 209 229
NAD 015 025
NEC 070 130 134 040 056 007 019 024 004 213
NIKEI 043
ONKING 043
ONWA 043
OPTONICA 019 081
ORION 096 201 202 203 204 205
PANASONIC 034 056 080 164 206
PENNEY 065 160 004 008 070 143 030 221
PHILCO
070 003 004 024 056 059 060 063 064 127 143 164
PHILIPS 164 005 038 093 127 070 003 004 059
PIONEER 023 025 135 176 004 018 070
PORTLAND 004 143
PROSCAN 144 160 161 167
PROTON 004 058 143 171 173 193 131
QUASAR 034 056
RADIO SHACK 004 019 127 143 043
RCA 160 161 144 156 065 070 004 023 024
056 074 152 221
REALISTIC 007 019
RUNCO 072 169 073 130 179 180 181
SAMPO 070 004 058 218 220
SAMSUNG 004 101 127 133 143 160 089 105 070
SANYO 007 053 057 082 020 212
SCOTT 004 005 028 043 048 143
SEARS 004 007 015 028 030 057 082 094 143 160
SELECO 189
SHARP 081 014 019 028 004 022 081 143 175 029
SIGNATURE 072
SONY 001 085 126 139
SOUNDESIGN 003 004 028 043
SPECTRICON 112
SSS 004 043
SUPRE MACY 002
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
JCL 031
JCPENNY 012 013 040 101 156 066
JENSEN 043
JVC 048 050 043 130 060 012 031 150 055 158
KENWOOD 014 034 047 048 023
LLOYD 034
LXI 034 003 009 017
MAGIN 040
MAGNAVOX 067 031 034 041 068 154 160 064
MARANTZ 067 069 031 067 012 023
MARTA 101
MATSUI 027 030
MEI 031
MEMOREX 102 101 003 010 014 031 034 053 072
139 134
MGA 045 046 059
MINOLTA 013 156
MITSUBISHI 059 061 046 051 142 013 045 162
MTC 034 040
MULTITECH 024 034
NEC 012 023 043 048 039
NORDMENDE 043
OPTONICA 053 054
PANASONIC 070 133 031 066 160 161
PENTAX 013 031 063 156
PHILCO 031 034 067
PHILIPS 031 067 034 101 054 071
PILOT 101
PIONEER 021 013 048
PORTLAND 108
QUARTZ 002 014
QUASAR 070 133 161 031 066 160
RADIO SHACK 123
RCA 107 109 144 147 151 013 041 034 040
156 031 140
REALISTIC 003 008 010 014 031 034 040 053 054 101
RICO 058 078
SALORA 014
SAMSUNG 102 040 032 104 107 109 112 113 115
120 122 125 159
SANSUI 043 048 135 022
SANYO 003 010 102 007 014 134
SCOTT 017 037 044 129 131 112 159
SEARS 003 008 009 010 013 014 017 081 101
SHARP 031 054 053 143
SHINTOM 024
SIGNATURE 034
SONY 001 057 058 003 052 149 031 155
SOUNDESIGN 034
STS 013
SYLVANIA 031 059 034 067
SYMPHONIC 034
TANDY 010 034
TATUNG 039 043 023
TEAC 034 039 043 023
VCR & TV/VCR
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
SYLVANIA 070 003 059 060 063 064 127 160 164
044 056 210
SYMPHONICS 052
TANDY 081
TATUNG 056 062 209
TECHNICS 034 080
TECHWOOD 004
TEKNIKA
002 003 004 024 028 043 072 101 143 103 227
TELERENT 072
TERA 172
TMK 004
TOSHIBA 015 030 007 040 062 101
TOTEVISION 143
UNIVERSAL 008 009
VIDEO CONCEPTS 146
VIDIKRON 174 188
VIDTECH 004
WESTING HOUSE 076
WARDS 004 064 164 008 009 019 028 060 061
063 072 074 143 070 224 225
YAMAHA 004 070
YORK 004
YUPITERU 043
ZENITH 072 073 095 103
ZONDA 112
TV
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
TECHNICS 031 070
TEKNIKA 031 019 034 101
TMK 006
TOSHIBA 112 008 131 047 059 082 013 042
TOTEVISION 040 101
UNITECH 040
VECTOR RESEARCH 012
VIDEO CONCEPTS 012 046 034 141
VIDEOSONIC 040
WARDS 003 013 024 031 034 040 053 054 017 131
YAMAHA 012 043 034 039
ZENITH 072 080 001 048 034 101 058
VCR & TV/VCR
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
AIWA 034
AKAI 016 043 046 124 125 142 146
AMPRO 072
ANAM 031
AUDIO DYNAMICS 012 023 039 043
BROOKSONIC 035 037 044 129 152
CANON 028 031
CAPEHART 108
CRAIG 003 040 135
CURTIS MATHES 031 041 156
DAEWOO 117 119 005 116 007 010 065 108 110 112
DAYTRON 108
DIMENSIA 156
DBX 012 023 039 043
DYNATECH 034 053
ELECTROHOME 059
EMERSON 006 029 035 025 027 034 036 037 046 101
129 131 138 017 031 044 152 153 157
FISHER 003 008 009 010
FUNAI 034
GE 031 072 144 147 063 151 107 109 156 126
GO VIDEO 040 132 136
GOLDSTAR/LG 101 123 012 013 114
HARMAN KARDON
012 045
HITACHI 013 026 034 063 137 150 156
HUGHES 013
INSTANTREPLAY 031
VCR & TV/VCR
*Note : For TV/VCR combination unit,
Please use following steps to operate the
Volume control.
STEP1 Press the [CBL] button and the
[SELECT] button simultaneously
for 3 seconds. The [CBL] button
will light on for 20 seconds.
STEP2 Press the [VOL+] button.
STEP3 Press the [VCR] button. The LED
will blink twice to confirm the
programming.
MAKER(BRAND) NAME CODE NUMBER (3 DIGIT) LIST
ALPINE 179
APEX DIGITAL 196 197
DENON 184 226
GE 188 189
GOLDSTAR/LG 182 194
HARMAN KARDON
217
HITACHI 181
JVC 185
MAGNAVOX 178 191 195
MARANTZ 176 177
MITSUBISHI 186
NAD 198
ONKYO 207
PANASONIC 173 192
PHILIPS 176 177 191 195
PIONEER 175 180 187
PROCEED 172
PROSCAN 188 189
RCA 188 189
SAMSUNG 183 193
SHARP 174
SONY 190
TOSHIBA 171 191 206
YAMAHA 192 199
ZENITH 182 194
DVD(VCR)