
STEP 3: Place the Ice Cream Maker power unit onto the fast-freezing bowl; it should sit
neatly with the tabs slotting into the corresponding wells on the rim.
STEP 4: Twist the transparent lid in a clockwise direction and lock it into place.
Using the Ice Cream Maker
STEP 1: Approx. 8 hours before making the ice cream, place the fast-freezing bowl into
the freezer to chill. Make sure the temperature is set to -18 °C or below.
STEP 2: Prepare the ice cream mixture and place it in the fridge to cool.
STEP 3: Once the fast-freezing bowl has chilled to the required temperature, remove it
from the freezer and place it onto a at, stable surface at a height that is comfortable for
the user.
STEP 4: Pour the ice cream mixture into the fast-freezing bowl, leaving a 4 cm gap
between the mixture and the rim.
STEP 5: Assemble the Ice Cream Maker following the instructions in the section entitled
‘Assembling the Ice Cream Maker’.
STEP 6: Plug in and switch on the Ice Cream Maker at the mains power supply.
STEP 7: Turn on the Ice Cream Maker using the on/off switch. Allow between 30 and
45 minutes for the mixture to thicken.
STEP 8: Once the desired consistency is achieved, turn off the Ice Cream Maker using the
on/off switch. Unplug it from the mains power supply and remove the transparent lid.
STEP 9: Place the fast-freezing bowl into the freezer until ready to serve.
Hints and Tips
1. The freezer should be set to a temperature of at least -18 °C when placing the
fast-freezing bowl into the freezer to chill.
2. Refrigerate the ice cream or sorbet mixture beforehand to aid the ice cream
making process.
3. Do not shake, puncture or heat the fast-freezing bowl, as this could cause damage.
4. Do not add alcohol to the ice cream mixture, as this will prevent the mixture
from freezing.
Storage
Check that the Ice Cream Maker power unit is cool, clean and dry before storing in a cool,
dry place.
Never wrap the cord tightly around the Ice Cream Maker; wrap it loosely to avoid
causing damage.
Store the fast-freezing bowl in the freezer at all times so that it is always ready to use.
Specications
Product code: EK4390PVDEEU7
Input: 220–240 V ~ 50Hz
Output: 12 W
6