Uplift desk Upl143 User manual

10-11 x 5/8’’

Wood screws

(qty 5)

10-32 x 3/8’’

Machine screws

(qty 10)

Corner sleeve (top) Corner sleeve (bottom) Barrel nuts

(qty 2)

Step 1

Use four (4) Machine screws to attach the track from your keyboard

tray to the bottom half of the Corner sleeve. (Keyboard tray track not

included in this kit. Obtain it from your keyboard tray contents)

Step 2

Take the top-half of the Corner sleeve and lower it onto the bottom

half. Tighten the Barrel nuts loosely. Do not tighten the Barrel nuts all

the way until Step 3.

Step 3

Slide the Corner sleeve onto the corner of the desktop where you

want it. Once it is in place, tighten the Barrel nuts to secure it in place.

Package contents

Corner Sleeve

UPL143

Step 4

Drill pilot holes (1/8” wide; 5/8” deep) then use the ve (5) Wood

screws to rmly attach the sleeve and track onto the desktop. Use the

screws from your keyboard tray kit to attach the rear bumper and to

add additional stability.

Step 5

Slide your keyboard tray mechanism onto the track. (keyboard tray

mechanism not included in this kit. Obtain it from your keyboard tray

contents)

Step 6

Use three (3) Machine screws to attach the front bumper to the

keyboard tray track, to prevent your keyboard tray mechanism

from sliding forward off the track. There should be three (3) extra

Machine screws left for future use.

These instructions are a component of the UPLIFT Corner Sleeve. These instructions are part of the scope of delivery, even if the item is resold. These

instructions are also available on the UPLIFT Desk website: upliftdesk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form

without the prior written consent of UPLIFT Desk.

These instructions are subject to United States copyright law.

Dimensions 19.5’’ W x 11’’ D

Fits on desks 1’’ to 2.5’’ thick

Materials Black powder-coated steel

Warranty 5 years

Table of contents

Other Uplift Desk Desktop manuals