USOUND CARME 2.0 Owner's manual

CARME 2.0
Quick User Manual
Features
▪Speaker box with 100 mm³ back volume
▪Provides a convenient way to
connect and test Ganymede MEMS
speakers (Adap and Achelous)
Package Content
▪Shell and speaker gasket glued
▪PCB with cable to banana plugs
▪Housing gasket
▪Two screws
Carme is delivered assembled.
QUICK USER MANUAL | CARME | UJ-R 1020
Carme 2.0 is a speaker box designed for
testing the performance of our Ganymede
MEMS speaker family.
The speaker is not included.

▪To put the Ganymede MEMS speaker inside of the speaker box, rst, unscrew and separate
the PCB from the shell
▪Remove the housing gasket and place the Ganymede MEMS speaker with the contact side up
▪Lastly, place the housing gasket and the PCB on the shell, matching the orientation marks
available on the speakers and the PCB. For proper sealing, ensure that the screws are correctly
tightened.
The correct placement of the Ganymede MEMS speaker is illustrated below.
Setting up the System
Shell
Speaker gasket
Housing gasket
Gaynmede
MEMS speaker
PCB
2x Screws
(Not included)
Complete user manual available at www.usound.com/products.html
(Glued to the shell)

Complete user manual available at www.usound.com/products.html
USound also provides the amplier Amalthea for driving MEMS speakers. Should you require
assistance or further information, please contact a USound sales representative.
Orientation marks

USound GmbH | www.usound.com | [email protected]