Uspa UB-7035R Instruction Manual

VIA MONTEVERDI, 8
28100 NOVARA-ITALY
http

this appliance properly
repair this appliance by yourself. Doing so could void the warranty.

children, elderly or invalid.
Do not attempt to repair this appliance by yourself, doing so could
the use of this
this appliance.

0.05 MPa 0.75 MPa.
during
in the
WARNING Before installing this product, always observe the
local laws and regulations regarding installation
In countries where power outlets are not permitted in bathrooms, such as U.K. or Ireland, please consult a
qualified electrician for advice on connecting this unit to a power supply. The European two pin plug should be
removed and the unit should be connected to the mains by a qualified electrician.
In such countries, every time the operating instruction manual refers to unplug the power cord, the user must
instead switch off the circuit.
CONTINENTAL EUROPE
U.K. / IRELAND
an excessive
maintenance and cleaning.

circuit

Do not use many appliances
in a multiple adapter.

is set
elderly

Press “Dry” button. The dryer nozzle comes out (level 3, position 3).
This function will stop in 180 seconds automatically.
Press this button again to switch between Soft and Turbo drying modes.
defecation. This function will stop in 60 seconds automatically.
Intensive water pulsation (water pressure level 5) may help you for easier
Press “Kids/Auto” to change all functions to be suitable for children.
The following settings will be selected:
Posterior nozzle in oscillating mode: 1 min (pressure level 1, position 5).
Drying: 3 mins.
Children should use this unit under adult supervision.
Press “Kids/Auto” twice to activate Automatic function
The following settings will be selected:
Feminine nozzle: Wash - Oscillation - Pulsation will operate consecutively
Drying: 3 mins (level 3, position 3).
for 1 min (pressure level 3, position 3).
Press “Stop” to stop current operation.
When a user stands up, all operation will stop automatically.
Press “Cleansing” to clean your posterior. The function will stop in
60 seconds automatically.
Press this button again to activate oscillation. The nozzle moves back
and forth automatically to widen cleansing area.
Oscillation wash stops if this button is pressed again.
Press “Bidet” for feminine wash. The function will stop in 60 seconds
automatically.
Press this button again to activate oscillation. The nozzle moves back
and forth automatically to widen cleansing area.
Oscillation wash stops if this button is pressed again.
This appliance has a self-diagnosis system.
If the appliance experiences a problem, a power LED will blink.
Unplug and contact customer center immediately.
Press this button to activate soft and warm water spray (nozzle position 3,
water pressure level 2, water temperature 3) for washing and massaging.
Feminine nozzle will operate 3 minutes and will stop automatically.
Press this button again during this function to switch between normal
washing and washing with oscillation.
When the appliance is in use, the deodorizer will work automatically
(max 20 minutes).
When a user stands up, it stops after 60 seconds.
Nozzle position can be adjustable by pressing the nozzle position button.
Position will be initialized (level 3) after each use.
(UB-7235 / 7220 / 7215)
(UB-7235)
(UB-7235 / 7220 / 7215)
Water spray pressure can be adjusted in 5 levels.
Dryer temperature can be adjusted in 5 levels.
Both levels will be initialized (level 3) after each of use.
Temperature of water and seat (excepted UB-7000) can be adjusted.
There are four levels, Room temp-Low-Medium-High.
(water / seat)
Press the button to select Power on/off or Economy mode.
In the Economy mode, temperature of the seat will be kept to 30 °C
When the unit is occupied during the Economy mode, the temperature
will be returned to the original setting and go back to the Economy mode
after each use.
Red light: Normal mode
Green light: Economy mode
Off: Power off

Position will be initialized (level 3) after each use.
Both levels will be initialized (level 3) after each use.
to have easy defecation.
Press “IIP” button again to change the frequency of the pulsation mode
massaging.
for washing and
to widen cleansing area.
The following settings will be selected:
(see page 12).
(3 different modes available). Initially water pressure is set to level 5.
Feminine nozzle will operate 3 minutes and stops automatically.
(water
temperature level 3, water pressure level 1)
seconds.

(1/2" , 3/8")
Press “BK” button for 3 seconds, feminine and posterior nozzles come out
Do not forcefully push or pull the nozzles, or bend them.
Use a toothbrush or soft cloth to clean nozzles.
UB-7235 / 7220 / 7215 / 7210 / 7000
Press “FR” button, posterior nozzle comes out.
Press “BK” button, feminine nozzle comes out.
Press “Stop”, “FR”, “BK” and nozzles will return to their stand-by mode.
For estended period of time cleaning, unplug for safety.
Do not retract nozzles without a nozzle tip. It may result in malfunction.
Beware of losing or switching nozzle tips.
alternatively for five times each, activating self nozzle cleaning program.
Press “FR” button for 3 seconds, feminine nozzle comes out.
UB-7035R
Press “FR”, “BK” to shift alternatively the nozzles.
Press “Stop”, nozzles will return to their stand-by mode.
Make sure the occupied sensor is not activated.
(not sitting on the seat or not place hands on the seat sensor part)

Detach the unit.

a
430 480
400 450
410 460
respecting the
sequence shown in the picture.

Plug the power cord into the outlet. Press “BIDET” or “CLEANSING”, then water tank will be filled
within 30 seconds after the water tank has filled up, you will hear a long buzzer sound.
Cover the toilet bowl using the plastic wrapping sheet of the unit to prevent water from being sprayed
out of the toilet.
Then check for all the functions described in this manual.
(1/2" , 3/8")

correctly.
How to insert batteries
How to attach the remote control bracket to the wall

contact your dealer
Check if all hoses are tightened properly
Open the shutoff valve
Set the temperature following the instructions in this manual