USX-MOUNT XAS306-1 User manual

XAS306-1
INSTRUCTION MANUAL
For 26-55" TV
If you have any questions along the way, just give us a call
1-800-460-0956 or mail to [e-mail].
We’re ready to help!
R

Before getting started, let’s check below lists to make sure it is just right for you!
2
3
4
2
Does your TV
(including accessories)
weigh MORE than
66 lbs. (30 kg)?
Do you have
all the tools
needed?
(NOT INCLUDE) Tape
Measure
CAUTION
Screw
driver
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
1
Check your TV
VESA is within
Min and Max size
No? This mount is NOT compatible.
Yes? Perfect !
MAX:400mm/15.74"
(MIN:75mm/2.95")
MAX:400mm/15.74"
(MIN:75mm/2.95")
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of the
installation, assembly or use of this product, please feel free to contact Customer
Service:
E-mail: [e-mail]
Phone call: 1-800-460-0956

TV INTERFACE
3
3D
TOP VIEW-RETRACTED SIDE VIEW - RETRACTED
MAX:400mm
[15.75in]
MAX:400mm
[15.75in]
430mm
[16.93in]
262mm
[10.31in]
MIN:75mm
[2.95in]
MIN:75mm
[2.95in]
622mm
[24.49in] 502mm
[19.76in]

WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Hardware for extended arms assembly
4
Allen Key
x1
M6x8mm Bolt
x4
M4x12mm
M6x12mm
M8x25mm
M4x30mm
M6x35mm
M8x45mm
Extended Arms
x4
Spacers
TV Screws
x4
x4
x4
x4
x4
x4
TV Plate
x1
Hardware for TV assembly
M6x17mm
M8x22mm
M4 M6
10mm
2.5mm
Washers
x4
x4 x4
x8 x4
x4

Hardware for Products Assembly
5
Glass Base Column Plastic Sleeve Iron Sheet
M6x10mm
Bolt
M6x10mm
Bolt
Washer M8x30mm
Bolt
x2 x2 x2 x4
x1 x1 x1 x1
Cable Clips
x3

6
1-1 Choose correct configuration per your TV VESA size (hole pattern on TV back)
①
②
③
④
① 75X75
② 100X100
③ 100X200
④ 200X100
⑤ 200X200
⑤
①
②
③
④
⑤
①
②
③
④
⑤
①
②
③
④
⑤
⑥ ⑥
⑥ ⑥
150X150
⑥
If your TV VESA size is above 200*200mm, you need to assemble extended arms onto plate
using bolts and Alley key per below option 3 - option 6 shown.
Option 1 Option 2

7
200X300
400X400
400X200
400X300
⑧
⑦
⑨
⑧
⑦
⑧
⑦
⑧
⑦
⑧
⑦200X400
⑨
⑩⑨⑩
⑨
⑩⑨⑩
300X200
⑩
300X300
Option 3
Option 4
Option 5
Option 6

8
M8
M6
M4
1-2 Select TV Screws

VESA≤200X200mm
200X200mm<VESA≤400X400mm
9
Tips: If you need to combine M6/M8(c/e/f) screws with
2.5mm spacers( i ), you have to remove the inner circle.
Yes, choose suitable screws, washers and spacers.
1-4 Attach the TV Plate
No!
No, choose suitable screws and washers.
1-3 Need Spacer?

Assemble the column on the glass base through iron sheet and plastic sleeve with
screw .
10

11
Pretighten the screws as the TV height you desired, and hang your TV unit on the screws by
fastening the screws and washers .
TV
1 2

4-1 TV Tilting up adjustment (+3°):
If you need to tilt TV, you can loosen the bolts below and tilt up +3°
Then tighten the bolts.
+3°
12

4-2 Height Adjustment
If the TV height is still not suitable, you can adjust the height by following the steps below.
13
TV
1 2

4-3 Swivel Adjustment
14

4-4 Tidy the Cables
15
Press to Lock