UTE UH-2X2VW User manual

www.ute.de
UH-2X2VW
4K60 HDMI2.0 Video Wall Processor
All Rights Reserved
Version: UH-2X2_2022V1.0
User Manual

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG www.ute.de

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG www.ute.de
Statement
Thanks for purchasing this product, please read this user manual carefully before using
this product. Pictures are shown in this manual for reference only. Different models and
specifications are subject to real product.
This manual is only for operation instruction, please contact the local dealer for
maintenance assistance. The functions described in this version are updated till
October, 2022. In the constant effort to improve our product, we reserve the right to
make functions or parameters changes without notice or obligation. Please refer to the
dealers for the latest details.
All product function is valid till 2022-10-15.
Trademarks
Product model and logo are trademarks of U.T.E. electronic GmbH & Co. KG.
Any other trademarks mentioned in this manual are acknowledged as the properties of
the trademark owner. No part of this publication may be copied or reproduced without
the prior written consent.
FCC Statement
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. It has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a commercial
installation.
Operation of this equipment in a residential area is likely to cause interference, in which
case the user at their own expense will be required to take whatever measures may be
necessary to correct the interference.
Any changes or modifications not expressly approved by the manufacture would void
the user’s authority to operate the equipment.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG www.ute.de

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG www.ute.de
Safety Precaution
To ensure the best from the product, please read all instructions carefully before using
the device. Save this manual for further reference.
⚫Do not dismantle the housing or modify the module to avoid electrical shock or
burn.
⚫Using supplies not meeting the products' specifications may cause damage,
deterioration or malfunction.
⚫Do not expose the unit to rain, moisture or install this product near water.
⚫Install the device in a place with fine ventilation.
⚫Do not twist or pull by force ends of the optical cable. It can cause malfunction.
⚫Do not use liquid or aerosol cleaners to clean this unit.
⚫Always unplug the power to the device before cleaning.
⚫Unplug the power when not used for a long period of time.
⚫Refer all servicing to qualified service personnel.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG www.ute.de
Contents
1Introduction ...............................................................................................................1
1.1 Product Introduction..........................................................................................1
1.2 Features ...........................................................................................................1
1.3 Packing List ......................................................................................................1
2Panel Description ......................................................................................................2
2.1 Front Panel .......................................................................................................2
2.2 Rear Panel........................................................................................................2
3System Connection ................................................................................................3
3.1 Usage Precautions ...........................................................................................3
3.2 System & Connection Diagram UH-2X2VW .....................................................3
3.2.1 Normal Usage .......................................................................................3
3.2.2 Cascade Usage.....................................................................................4
4Video Wall Modes .....................................................................................................4
5IR Remote.................................................................................................................5
6Technical Specification..............................................................................................6
7After-sales / Customer Service..................................................................................8

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 1 www.ute.de
1 Introduction
1.1 Product Introduction
Thanks for choosing the 4K60 HDMI 2.0 Video Wall Processor UH-2X2VW.
The unit supports 1 HDMI input and 4 HDMI outputs. HDMI input supports resolutions
up to 4Kx2K@60Hz 4:4:4 and output resolution is fixed to be 1920x1080p@60Hz.
UH-2X2VW supports 9 video wall modes, which can be selected via front panel button
and IR remote.
1.2 Features
⚫HDMI input up to 4Kx2K@60Hz 4:4:4.
⚫HDCP 2.2 and 1.x compliant.
⚫Four HDMI output resolution fixed to be 1920x1080p.
⚫Built in automatic up & down-scaling to 1080p output.
⚫Controlled by front panel button and IR remote.
⚫Nine video wall modes(1x1, 1x2, 1x3, 1x4, 2x1, 3x1, 4x1, 2x2, 2x2 Rotation)
selectable.
⚫Cascadable for larger system.
⚫Mute & Unmute optional for audio output.
1.3 Packing List
⚫1x UH-2X2VW: 4K60 HDMI 2.0 Video Wall Processor with 9 video wall modes
⚫4x Plastic Cushions
⚫2x Mounting Ears
⚫2x Mounting Screws
⚫1x IR Remote
⚫1x Power Adapter (12V DC 1A)
⚫1x User Manual
Note: Please contact your dealer immediately if any damage or defect in the
components is found.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 2 www.ute.de
2 Panel Description
2.1 Front Panel
Figure 2-1 UH-2X2VW Front Panel
①POWER LED: The LED illuminates green when power is applied.
②IR: Built-in IR sensor to receive IR signal..
③AUDIO: Press the button to turn on/off audio output.
④MODE: Press the button to toggle video wall modes.
2.2 Rear Panel
Figure 2-2 UH-2X”VW Rear Panel
①INPUT: Type-A female HDMI input port to connect a HDMI source.
②OUTPUT: Four type-A female HDMI output ports to connect HDMI displays.
③DC 12V: DC barrel port to connect an AC power adapter.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 3 www.ute.de
3 System Connection
3.1 Usage Precautions
1) Make sure all components and accessories included before installation.
2) System should be installed in a clean environment and has a prop temperature and
humidity.
3) All of the power switches, plugs, sockets and power cords should be insulated and
safe.
3.2 System & Connection Diagrams UH-2X2VW
The following diagrams illustrates the typical input and output connection that can be
utilized with 4K60 HDMI2.0 Video Wall Processor UH-2X2VW:
3.2.1 Normal Usage
Figure 3-1 Connection and System Diagram: Normal Usage
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 4 www.ute.de
3.2.2 Cascade Usage
Figure 3-2 Connection and System Diagram: Cascade Usage
4 Video Wall Modes
User can press the button on the front panel or IR remote to toggle 9 video wall modes.
Figure 4-1 Video Wall Modes
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 5 www.ute.de
5 IR Remote
The 4K60 HDMI2.0 Video Wall Processor UH-2X2VW has a built-in IR sensor to
receive IR control signal from IR remote (included).
①Standby button:
Press it to enter/ exit standby mode.
②Mute button:
Press it to enter/ exit audio mute mode.
③OSD button:
Press it to show/ hidden OSD.
④Navigation buttons for OSD
⑤Video wall mode select button:
Press them to select video wall mode.
Navigation buttons for previous/ next mode.
2x2 button will toggle between
2x2 mode and 2x2_Rotation mode.
Note: Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
1x3 3x1
1x4 4x1
OSD
2x2
1
2
3
4
5

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 6 www.ute.de
6 Technical Specification
Video Input
Input
(1) HDMI
Input Connector
(1) Type-A female HDMI, 19 pin
HDMI Input Resolution
Up to 4K@60Hz 4:4:4
HDMI Standard
2.0
HDCP Version
2.2, 1.4 compliant
Video Output
Output
(4) HDMI
Output Connector
(4) Type-A female HDMI, 19 pin
HDMI Output Resolution
Up to 1920x1080p@60Hz (Full HD, 1080p60)
HDMI Standard
2.0
HDCP Version
2.2, 1.4 compliant
Video Wall Support
Video Wall Support –
Single
1x1, 1x2, 1x3, 1x4, 2x1, 2x2, 2x2 Rotated, 3x1, 4x1
Video Wall Support –
Cascade
Up to 6 layers
Control Method
Buttons on the front
IR Remote

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 7 www.ute.de
General
Color Format
RGB, YCbCr 4:4:4, 4:2:0
[YCbCr 4:2:2 is not supported]
Color depth
24-bit, 30-bit or 36-bit deep color
Audio Format
Supports PCM2.0
Output Latency
< 1ms
Operation Temperature
-5 to +55℃ (+23° to +131°F)
Storage Temperature
-25 to +70℃ (-13° to +158°F)
Relative Humidity
10% to 90%, non-condensing
Power Supply
Input:100V~240V AC;
Output: 12V DC 1A
Power Consumption
11W (max.)
Dimension (W*H*D)
210mm x 18mm x 110mm (8.27 x 0.71 x 4.33 in)
Net Weight
550g
Note: Please adopt high-qualified HDMI cable fully compliant with HDMI 2.0 for
reliable transmission and connection.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 8 www.ute.de
7 After-sales / Customer Service
Any transport costs are borne by the users during the warranty.
The return of a product to our Customer Service implies the full agreement of the terms
and conditions hereinafter. There terms and conditions may be changed without prior
notice.
1) Product Limited Warranty: We warrants that its products will be free from defects
in materials and workmanship for two years, which starts from the first day you buy
this product (The purchase invoice shall prevail).
Proof of purchase in the form of a bill of sale or receipted invoice which is evidence
that the unit is within the Warranty period must be presented to obtain warranty
service.
2) Scope
These terms and conditions of Customer Service apply to the customer service
provided for the products or any other items sold by authorized dealer only.
3) What the warranty does not cover (Warranty Exclusion)
⚫Warranty expiration.
⚫Factory applied serial number has been altered or removed from the product.
⚫Damage, deterioration or malfunction caused by:
•Normal wear and tear.
•Use of supplies or parts not meeting our specifications.
•No certificate or invoice as the proof of warranty.
•The product model showed on the warranty card does not match with the model
of the product for repairing or had been altered.
•Damage caused by force majeure.
•Servicing not authorized by distributor.
•Any other causes which does not relate to a product defect.
⚫Shipping fees, installation or labor charges for installation or setup of the
product.
4) Documentation: Customer Service will accept defective product(s) in the scope of
warranty coverage at the sole condition that the defeat has been clearly defined,
and upon reception of the documents or copy of invoice, indicating the date of
purchase, the type of product, the serial number, and the name of dealer.

UH-2X2VW: 4K60 HDMI2.0 Video Wall Processor
U.T.E. electronic GmbH & Co. KG 9 www.ute.de
5) Technical Support: Email to our after-sales department or make a call, please
inform us the following information about your cases.
⚫Product version and name.
⚫Detailed failure situations.
⚫The formation of the cases.
Remarks: For any questions or problems, please try to get help from your local dealer
or our customer support ([email protected]).

U.T.E. electronic GmbH & Co. KG www.ute.de
U.T.E. electronic GmbH & Co. KG
Tel: +49-2302-28283-0
Fax: +49-2302-28283-10
Email: [email protected]
Website: www.ute.de
Table of contents
Popular Computer Hardware manuals by other brands

Supermicro
Supermicro AOC-SLG4-2E4T user guide

Microchip Technology
Microchip Technology MPLAB REAL ICE In-Circuit Emulator Setup

Nvidia
Nvidia DRIVE AGX Hardware quick start guide

Arduino
Arduino PRO Portenta X8 Product reference manual

Belden
Belden grass valley STORM Pro Setup guide

AMD
AMD FM2+ installation instructions

ActionTec
ActionTec Wireless PC Card manual

NXP Semiconductors
NXP Semiconductors i.MX 6SoloX SABRE-SDB quick start guide

Lian-Li
Lian-Li O11DE-9X instructions

Shuttle
Shuttle D230 quick guide

Supermicro
Supermicro BPN-SAS3-119A-N12 user guide

Intel
Intel SRCSASBB8I - RAID Controller Hardware user's guide