Please check the following items after unpacking, if any missing, please contact your local dealer.
This series contains the following types:
Single-Port Multi-Gigabit 802.3bt PoE++ Injector (60W)
Single-Port Multi-Gigabit 802.3bt PoE++ Injector (90W)
The PoE injector is designed for where standard PoE is difficult to deploy. It is plug and play, easy to install
without software configuration required, just plug in AC power cord and Ethernet cable to provide high-
speed network communication and IEEE 802.3bt PoE++. It can be widely used as power supply for IPC,
AP and other equipment.
The PoE output is 60-90W.(60W Injector does not
have this status)
The PoE output is 30-60W.
Single-Port Multi-Gigabit 802.3bt
PoE++ Injector (60W)
Single-Port Multi-Gigabit 802.3bt
PoE++ Injector (90W)
1*10/100/1000/2.5GBASE-T PoE++ RJ-45(Auto-MDI/MDI-X)
1*10/100/1000/2.5GBASE-T RJ-45(Auto-MDI/MDI-X)
IEC61000-4-2, Level 3: Contact Discharge: ±6kV, Air Discharge: ±8kV
IEC61000-4-3, Level 2: 3V/m
IEC61000-4-4, Level 2: 1kV
IEC61000-4-5, Line to earth: 6kV
IEC61000-4-6, Level 2(0.15~80MHz)
-5°C~45°C, 5%~85%(Non-condensation)
-30°C~70°C, 5%~85%(Non-condensation)
Single-Port Multi-Gigabit 802.3bt PoE++ Injector (60W/90W)
Quick Installation Guide
