Utilitech UT70C User manual

Purchase Date
ATTACH YOUR RECEIPT HERE
1
AB16244
Serial Number
MODEL #UT70C
Español p. 16
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-602-674-1000, 8 a.m. - 5 p.m., MST, Monday - Friday.
MEDIUM – LARGE
FULL MOTION TV MOUNT
ITEM #0794078
Lowes.com

Lowes.com
2
PACKAGE CONTENTS
B
B
D
C
A
C
DE
PART DESCRIPTION QUANTITY
D Monitor adapter B 2
E Monitor plate
(pre-assembled to
Mounting arm (A))
1
PART DESCRIPTION QUANTITY
A Mounting arm 1
B End cap 2
CMonitor adapter A 2

Lowes.com
3
HARDWARE CONTENTS (shown actual size)
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ

Lowes.com
4
SAFETY INFORMATION
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, DO NOT attempt to
assemble the product.
Estimated Assembly Time: 30 minutes
Tools Required for Assembly (not included): Drill with 7/32 in. and 3/8 in. drill bits, stud nder, socket
wrench, pencil, Phillips screwdriver, hammer, level.
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING
• FAILURE TO READ, THOROUGHLY UNDERSTAND, AND FOLLOW ALL INSTRUCTIONS CAN
RESULT IN SERIOUS PERSONAL INJURY, DAMAGE TO PERSONAL PROPERTY, OR VOIDING
OF FACTORY WARRANTY.
• DO NOT attempt to install or assemble this product if the product or hardware is damaged or
missing. The included hardware is designed for use on vertical walls constructed of wood studs or
solid concrete. A wood stud wall is dened as consisting of a minimum of 2x4 wooden studs
(2 in. wide by 4 in. deep) with a maximum of 5/8 in. drywall. The included hardware is not designed
for use with metal studs or cinderblock walls. If you are uncertain about the construction of your
wall, please consult a qualied contractor or installer for assistance. For safe installation, the wall
selected for mounting must support 4 times the weight of the total load. If not, the surface must be
reinforced to meet this standard. The installer is responsible for verifying that the wall structure and
hardware used in any installation method will safely support the total load.
CAUTION
• The maximum loading weight is 70 lbs. Use with products heavier than the maximum weight
indicated may result in instability and possible personal injury.
• Max screen size: 60 in.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Lowes.com
5
SPECIFICATIONS
Dimensions and Mounting Congurations
400 mm (15.7 in.)
400 mm (15.7 in.) 300 mm (11.8 in.)
200 mm (7.9 in.)
200 mm
(7.9 in.)
100 mm
(3.9 in.)
300 mm (11.8 in.)
400 mm (15.7 in.)
400 mm (15.7 in.)
300 mm (11.8 in.)
200 mm
(7.9 in.)
300 mm
(11.8 in.)
300 mm
(11.8 in.)
200 mm
(7.9 in.)
300 mm (11.8 in.)
200 mm (7.9 in.)
200 mm
(7.9 in.)
100 mm
(3.9 in.)
200 mm
(7.9 in.)
AABB
A
ABB
B
BAA
B
BAA
A
ABB
B
BAA

Lowes.com
6
ASSEMBLY INSTRUCTIONS
3. Determine mounting conguration to use based
on the mounting hole pattern on the back of at
panel TV (not included).
2. Remove monitor plate (E) from mounting arm (A).
1. Remove two mounting arm screws (PP) from
mounting arm (A) and save them for later use.
2
E
A
315.7 in.
15.7 in. 11.8 in.
7.9 in.
7.9 in.
3.9 in.
11.8 in.
15.7 in.
15.7 in.
11.8 in.
7.9 in.
11.8 in.
11.8 in.
7.9 in.
11.8 in.
7.9 in.
7.9 in.
3.9 in.
7.9 in.
AABB
A
ABB
B
BAA
B
BAA
A
ABB
B
BAA
2
1
1
PP
A
Hardware Used
PP x 2
Mounting arm screw
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ

Lowes.com
7
ASSEMBLY INSTRUCTIONS
4. If needed, attach monitor adapters A (C) and
monitor adapters B (D) to monitor plate (E) in the
desired conguration using Phillips screws (OO).
5a. For at back at panel: Attach monitor plate (E)
with four square washers (KK) and four screws (*).
*Note: Monitor plate (E) can be attached with M4 x 12
screws (AA), M5 x 12 screws (BB), M6 x 15 screws (CC),
or M8 x 15 screws (DD) depending on your TV.
1
2
4
D
E
OO
C
D
1
2
5a
KK
E
*
Tip: 5 mm spacers (LL) and/or
10 mm spacers (MM) can also be
used to provide clearance for cables
and connectors.
LL or MM
Hardware Used
OO x 8
Phillips screw
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
Hardware Used
AA
KK
BB
CC
DD
x 4
x 4
x 4
x 4
x 4
M4 x 12 Screw
Square washer
M5 x 12 Screw
M6 x 15 Screw
M8 x 15 Screw
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ

Lowes.com
8
ASSEMBLY INSTRUCTIONS
5b. For curved back at panel: Attach monitor
plate (E) with four spacers (*), four square
washers (KK) and four screws (**).
*Note: 5 mm spacers (LL) or 10 mm spacers (MM) can
be used depending on your TV.
**Note: Monitor plate (E) can be attached with
M4 x 30 screws (EE), M5 x 30 screws (FF), M6 x 30
screws (GG), or M8 x 30 screws (HH) depending on
your TV.
1
2
5b
KK
E
*
**
Hardware Used
EE
KK
FF
GG
HH
x 4
x 4
x 4
x 4
x 4
M4 x 30 Screw
Square washer
M5 x 30 Screw
M6 x 30 Screw
M8 x 30 Screw
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
LL
MM
x 4
x 4
5 mm Spacer
10 mm Spacer
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ

Lowes.com
9
ASSEMBLY INSTRUCTIONS
6. If screws are too long, additional 5 mm spacers (LL),
10 mm spacers (MM), and steel washers (NN) may
be needed.
Wood Stud Installation
Note: For concrete, proceed to step 12.
7. Use a stud nder (not included) to locate wood
studs. Mark the edge and center locations.
TV
6
MM
NNLL
NN
11
2
7
Hardware Used
LL
MM
NN
x 4
x 4
x 8
5 mm Spacer
10 mm Spacer
Steel washer
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ

Lowes.com
10
ASSEMBLY INSTRUCTIONS
8. Use mounting arm (A) to mark two mounting hole
locations.
9. Drill two 7/32 in. pilot holes 2-1/3 in. (60 mm) deep
at the marked locations for the mounting holes.
10. Mount top of mounting arm (A) using
8 mm lag bolt (II) with a 1/2 in. socket wrench
(not included).
1
8
A
9
1
2
10
A
II
Hardware Used
II x 1
8 mm Lag bolt
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ

Lowes.com
11
ASSEMBLY INSTRUCTIONS
11. Make sure mounting arm (A) is level, then secure
bottom of mounting arm (A) using 8 mm lag bolt (II).
1
2
11
A
II
Hardware Used
II x 1
8 mm Lag bolt
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
Concrete Installation
12. Use mounting arm (A) to mark two mounting hole
locations.
13. Drill two 3/8 in. pilot holes 2-3/4 in. (70 mm) deep at
the marked locations for the mounting holes.
1
12
A
13

Lowes.com
12
ASSEMBLY INSTRUCTIONS
14. Insert anchors (JJ) into holes. Tap with hammer (not
included) if necessary.
2
14
1
1
JJ
1
2
15
A
II
1
2
16
A
II
Hardware Used
JJ x 2
Anchor
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
15. Mount top of mounting arm (A) using
8 mm lag bolt (II) with a 1/2 in. socket wrench
(not included).
Hardware Used
II x 1
8 mm Lag bolt
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
16. Make sure mounting arm (A) is level, then secure
bottom of mounting arm (A) using 8 mm lag bolt (II).
Hardware Used
II x 1
8 mm Lag bolt
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ

Lowes.com
13
ASSEMBLY INSTRUCTIONS
Final Installation
17. Snap end caps (B) onto top and bottom of
mounting arm (A).
18. Place mounting plate (E) onto mounting arm (A).
17
B
A
18
E
A
1
2
19
E
A
PP
Hardware Used
PP x 2
Mounting arm screw
M4 x 12
Screw
Qty. 4
AA
M5 x 12
Screw
Qty. 4
BB
M6 x 15
Screw
Qty. 4
CC
M8 x 15
Screw
Qty. 4
8 mm Lag bolt
Qty. 2
Anchor
Qty. 2
DD
M4 x 30
Screw
Qty. 4
EE
M5 x 30
Screw
Qty. 4
FF
M6 x 30
Screw
Qty. 4
GG
M8 x 30
Screw
Qty. 4
HH
Square
washer
Qty. 4
KK
5 mm
Spacer
Qty. 4
Phillips
screw
Qty. 8
Mounting arm screw
(preassembled to
Mounting arm (A))
Qty. 2
LL OO PP
10 mm
Spacer
Qty. 4
MM
Steel
washer
Qty. 8
NN
II JJ
19. Secure mounting plate (E) to mounting arm (A) with
the two previously removed mounting arm
screws (PP).
Note: DO NOT fully tighten mounting arm screws (PP).
Tighten ONLY to snug tension.

Lowes.com
14
ASSEMBLY INSTRUCTIONS
Post Installation Level
20. If needed, at panel can be leveled +/– 3 degrees.
Note: Leveling will be difcult if mounting arm
screws (PP) are too tight.
Adjust Tilt
21. Adjust TV to desired tilt and hold in place.
Rotate handle clockwise as far as possible. Pull
handle out and rotate counterclockwise as far as
possible. Repeat until tight.
To loosen, reverse the above step.
20
± 3°
1
1
4
3
2
21

Lowes.com
15
WARRANTY
Utilitech & UT Design® is a registered
trademark of LF, LLC. All rights reserved.
Printed in China
This product is covered against defects in materials and workmanship for 5 years. The manufacturer
will repair or replace the defective component or product, at its sole discretion. Failure to follow
product care instructions from the manufacturer will void the warranty.
To obtain warranty service, contact customer service at 1-602-674-1000. You must supply a copy of
your original receipt. If your product must be shipped for inspection, you will be responsible for the
shipping charges. Replacement product shipped to you will be returned freight pre-paid.
The manufacturer disclaims any liability for modications, improper installations, installations over
the specied weight range, or failure to follow care instructions provided by the manufacturer. To
the maximum extent permitted by law, the manufacturer disclaims any other warranties, expressed
or implied, including warranties of tness for a particular purpose and warranties of merchantability.
The manufacturer will not be liable for any damages arising out of the use of, or inability to use, this
product.
This warranty gives you specic legal rights, and you may also have other rights which vary from
state to state.
Specications are subject to change without prior notice.

Número de serie Fecha de compra
ADJUNTE SU RECIBO AQUÍ
16
¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro
Departamento de Servicio al Cliente al 1-602-674-1000, de lunes a viernes de 8 a.m. a
5 p. m., hora estándar del Este.
MODELO #UT70C
ARTÍCULO #0794078
MEDIANO – GRANDE
SOPORTE DE MOVIMIENTO
COMPLETO PARA
INSTALAR TELEVISOR
Lowes.com

Lowes.com
17
CONTENIDO DEL PAQUETE
B
B
D
C
A
C
DE
PIEZA DESCRIPCIÓN CANTIDAD
D Adaptador del monitor B 2
E Placa del monitor
(preensamblada en el
brazo de montaje [A])
1
PIEZA DESCRIPCIÓN CANTIDAD
ABrazo de montaje 1
BTapa de extremo 2
C Adaptador del monitor A 2

Lowes.com
18
ADITAMENTOS (se muestran en tamaño real)
Tornillo
M4 x 12
Cant. 4
AA
Tornillo
M5 x 12
Cant. 4
BB
Tornillo
M6 x 15
Cant. 4
CC
Tornillo
M8 x 15
Cant. 4
Tirafondo de 8 mm
Cant. 2
Ancla de
expansión
Cant. 2
DD
Tornillo
M4 x 30
Cant. 4
EE
Tornillo
M5 x 30
Cant. 4
FF
Tornillo
M6 x 30
Cant. 4
GG
Tornillo
M8 x 30
Cant. 4
HH
Arandela
cuadrada
Cant. 4
KK
Espaciador
de 5 mm
Cant. 4
Tornillo
Phillips
Cant. 8
Tornillo del brazo
de montaje
(preensamblado en
el brazo de montaje [A])
Cant. 2
LL OO PP
Espaciador
de 10 mm
Cant. 4
MM
Arandela
de acero
Cant. 8
NN
II JJ

Lowes.com
19
INFORMACIÓN DE SEGURIDAD
PREPARACIÓN
Antes de comenzar a ensamblar el producto, asegúrese de tener todas las piezas. Compare las
piezas con la lista del contenido del paquete y la lista de aditamentos. NO intente ensamblar
el producto si falta alguna pieza o si estas están dañadas.
Tiempo estimado de ensamblaje: 30 minutos
Herramientas necesarias para el ensamblaje (no se incluyen): Taladro con brocas de 7/32 pulg. y
3/8 pulg., detector de vigas, llave de dados, lápiz, destornillador Phillips, martillo, nivel.
Lea y comprenda por completo este manual antes de intentar ensamblar, utilizar o instalar el producto.
ADVERTENCIA
• NO LEER, COMPRENDER COMPLETAMENTE O SEGUIR TODAS LAS INSTRUCCIONES
PUEDE PROVOCAR LESIONES PERSONALES GRAVES, DAÑOS A LA PROPIEDAD PERSONAL
O LA ANULACIÓN DE LA GARANTÍA DE FÁBRICA.
• NO intente instalar o ensamblar el producto si este o los aditamentos están dañados, o si falta
algún aditamento. Los aditamentos incluidos están diseñados para utilizarse en paredes verticales
construidas de vigas de madera o concreto sólido. Una pared de vigas de madera, por denición,
consiste en vigas de madera de 2x4 (2 pulg. de ancho por 4 pulg. de profundidad) como mínimo
con un panel de yeso de 5/8 pulg. como máximo. Los aditamentos incluidos no están diseñados
para utilizarse con vigas de metal o paredes de bloques de hormigón. Si no está seguro sobre la
construcción de su pared, consulte a un contratista o instalador calicado para obtener ayuda. Para
una instalación segura, la pared que escoja para colocar el montaje debe poder soportar 4 veces el
peso de la carga total. De lo contrario, se debe reforzar la supercie para cumplir con esta norma.
El instalador es responsable de vericar que la estructura de la pared y los aditamentos utilizados
en cualquier método de instalación soporten de manera segura la carga total.
PRECAUCIÓN
• La carga máxima de peso es de 31,75 kg (70 libras). El uso con productos más pesados que la
capacidad máxima indicada puede ocasionar inestabilidad o lesiones.
• Tamaño máximo de la pantalla: 152,4 cm (60 pulg.)
GUARDE ESTAS INSTRUCCIONES PARA REFERENCIA FUTURA.

Lowes.com
20
ESPECIFICACIONES
Dimensiones y conguraciones de montaje
400 mm (15,7 pulg.)
400 mm (15,7 pulg.) 300 mm (11,8 pulg.)
200 mm (7,9 pulg.)
200 mm
(7,9 pulg.)
100 mm
(3,9 pulg.)
300 mm (11,8 pulg.)
400 mm (15,7 pulg.)
400 mm (15,7 pulg.)
300 mm (11,8 pulg.)
200 mm
(7,9 pulg.)
300 mm
(11,8 pulg.)
300 mm
(11,8 pulg.)
200 mm
(7,9 pulg.)
300 mm (11,8 pulg.)
200 mm (7,9 pulg.)
200 mm
(7,9 pulg.)
100 mm
(3,9 pulg.)
200 mm
(7,9 pulg.)
AABB
A
ABB
B
BAA
B
BAA
A
ABB
B
BAA