UTS STAIRWELL PODIUM User manual

UTS STAIRWELL PODIUM
Instruction/Safety Manual Self Closing 1 Person Low Level
Working Platform, 0.25m, 0.5m platform height.
Manufactured to ISO 9001:2015 Quality Control System
Maximum safety working load 150Kg
For more information, please contact us via:
Phone: [phone]
Email: [email protected]
Website: www.towersandpodiums.co.uk
Always carry out a risk assessment for each task before you
start work, to ensure UTS STAIRWELL PODIUM is the correct
mode of access for the task that is being undertaken.
1. With Podium closed, Insert adjust-
able legs, ensure short legs go at the
gate end of the podium.
2. While folded move to top of
stairway.
4.a) Open out and approxamtly level
the podium on the stairway using the
adjustable legs.
6. Attach horizontal brace to hold
shape. Then double check level,
using a spirit level.
2. Extend longer legs appoximatly
enough to allow for stair rises
4.b) Ensure the bottom locking elbow
has engaged.

DOCUMENT NO: PMS001, VERSION NO: 1.2, DATE: 01/12/2021, APPROVED BY:A.GUNTRIPP, REVIEWED BY:M.GRANGER
Component List:
1 x Main Frame
1 x Brace
1 x Platform
2 x Stabilisers
2 x Adjustable legs with Baseplates
2 x Adjustable legs with Baseplates (XL)
All replacements can be purchased directly
from UTS Sales and Repairs
6. Attach stabilisers to each side facing
down the stairs. Ensure they are tted
tightly using the palm wheel and coupler
UTS Sales and Repairs
Unit 1A
Canterbury Industrial Park
Island road
Hersden
Kent
CT3 4HQ
01227 860085
www.towersandpodiums.co.uk
7. Climb through the unit, open the gate
and retrieve the platform, position it on
required level.
Safety Information:
The unit has been designed to provide a safer way of working on
staircases. Never use the UTS Stairwell Podium until you have read the
instructions fully and understood the following guide.
The UTS Stairwell Podium allows stable, safe access whilst working on a
staircase. This unit ideal for 1 man use and rapid access.
Safety Checklist:
1. Make sure that the equipment is in good working order.
2. The total load (person and equipment) must not exceed 150KG.
3. Ensure all components are present and correctly tted before use.
4. Check all stabilisers are tted securely and planted rmly on step
GENERAL SAFETY RULES:
• Do not use if the product is damaged or has missing parts
• Do not use on unstable ground such as lose bricks, boxes or blocks
• Always check the unit is level before use
• Remove all materials before moving the unit
• Do not gain extra height by using boxes, ladders etc. on the platform
• Do not overload the unit
• Do not overreach out the unit
• Engage all stabilisers in their correct position before use on staircases
• Never climb the outside of the unit