V-TAC VT-2408 User manual

RGB+W/WW CONTROLLER
MODEL NO: VT-2408
SKU: 3326.

PRODUCT DESCRIPTION:
The RGB+W/WW controller is divided into two parts, RGB and W/WW. it can be turned ON/OFF RGB part and
W/WW part independently, and can control their brightness and their color independently, such as, when turn on
RGB part, it can change RGB part's color and brightness; and can turn on W/WW part at the same time, and can
turn ON/OFF W/WW part or adjust its brightness.
TECHINCAL SPECIFICATIONS
Working temperature：-20~+60℃
Input voltage：DC 12~24V
Connection mode：Common anode
Output current：<2A
Static power consumption：<1W
Output current：12V<96W, 24V<192W
DIRECTION FOR USE:
●Connect the load cord first, and then connect the power cord; Before power on please ensure no short
circuit between the cables;
●Used the 40 key infrared remote control, the key function are as follows:

●The keys function are as below：
Brightness rise
Brightness fall
OFF
ON
Static red
Static green
Static blue
Static white
Static orange
Static light green
Static dark blue
Static milk white
Static dark yellow
Static cyan
Static lyons blue
Static white pink
Static yellow
Static light blue
Static purple
Static green-white
Static light yellow
Static sky blue
Static brown
Static blue white
Brightness rise
Brightness fall
OFF
ON
25％
50％
75％
100％
JUMP3
FADE3
JUMP7
QULCK
FADE7
FLASH
AUTO
SLOW
CONNECTION
CAUTIONS
This products Input voltage is DC12V~24V. Other input voltages are not allowed.
Lead wire should be connected correctly and according to the wire color and the connecting diagram
offers.
Overloads are prohibited.