V-TAC VT-767-7 User manual

1. Please use the card to measure hole position correctly and
drill 3 holes.
2. Fix 3 expansion plugs into the holes.
3. Fix 3 screws into the explansion plugs with a spare space.
4. Insert the notch to the lower screw and fasten the whole lamp well.
5. Press the back button to adjust to the demanded working mode.
WEEE Number:80133970

≤10m
≤6
m
≤6
m
Installation
height
Mode A: Automatically turns on at
the dusk (<30lux) and remains 20%
bright,up to 5 hours after which it
turns off.
Mode B: Automatically turns on to
full brightness (800lm) when motion
is detected in the range ≤6 mtrs and
then tums to 3% brightness in 20
seconds of no motion.
Mode C: Automatically tums on to
full brightness (800lm) when motion
is detected in the range ≤6 mtrs
and then turns off in 30 seconds of
no motion.
Pls press the Button to adjust to different working mode:
Press 1st time for Mode A. Press 2nd time for Mode B.
Press 3rd time for Mode C. Press 4th time for off.
Installation Height
Detection Area
≤4m