Registering an Additional Handset
The CS6509A additional handset must be registered to the telephone base before use. To register the additional
handset to your CS6519A, follow the instructions below.
Press and hold /HANDSET LOCATOR on the base station for about five seconds, the base station is entered into
registration mode.
Press OK and or to select REGISTRATION.
Press OK and or to select the base station to register the handset.
Press OK and you are requested to enter the 4-digit system PIN.
Enter the 4-digit system PIN and press OK to confirm and begin registration.
NOTE
If the handset registration is successful, the handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode.
If you have any problems with your phone, refer to the TROUBLESHOOTING section of your CS6519A User’s
manual, or call our Customer Service Hotline.
© 2015 VTech Telecommunications Ltd. All Rights Reserved.
1.
2.
3.
4.
5.