Show settings
and options.
Select music source
(Internet Radio,
My Music, FM Radio,
Aux In).
Show a list of saved
favorite stations.
Show weather
information.
Adjust
listening
volume.
Select the
highlighted
item.
�eturn to
the previous
menu.
Press to
turn the
IS9181
system on
and off.
Rotate clockwise or
counter-clockwise to
navigate through the
menu and display
items
My Music: play and
pause current song.
Internet and FM
Radio: mute and un-
mute audio.
Skip to next
station or
song.
Skip to
previous
station or
song.
Set the clock and weather
To complete the setup of the IS9181, you need to set the clock
and weather.
Setting the clock
1. Select CHANGE .
2. Select
Auto (from Internet) .
3. Select your time zone from
the list.
4. Select On or Off for
daylight saving.
The IS9181 will automatically
retrieve and update the current time for your time zone from
the Internet.
NOTE: Daytime saving time adjustments must be changed
manually.
Weather settings
1. Select CHANGE .
2. Choose your country from
the list.
3. Enter your 5 digit zip code
(USA) or 6 character postal
code (Canada).
4. Move the rotary dial to
highlight DONE and
then press SELECT.
The IS9181 will automatically retrieve and update the
current weather information for your zip/postal code from the
Internet.
NOTE: Like a personal computer, the IS9181 is exposed to a
multitude of Internet trafc and signals which can sometimes result
in unexpected operations. If you nd that the IS9181 is behaving
abnormally we recommend that you reset it by unplugging power
for a few minutes and then plugging it back in.
Controls Before you begin
A wireless network with Internet access is required to
complete the setup of your IS9181. For easier setup, write
the required information in the table below.
Wireless Network
Your Network Name
(SSID)
Your Password (Network
Key)
Clock
Your Time Zone
(Newfoundland, Atlantic,
Eastern, Central,
Mountain, Pacic,
Hawaii, Alaska)
Weather Settings
Your 5 digit zip code
(USA)
or
6 character postal code
(Canada)
Getting started
Peel both of the clear plastic protective sheets away from
the top and the display of the IS9181 WiFi Internet Radio.
Plug the small end of the power adapter into the jack
labeled DC 14V on the back of the IS9181.
Plug the large end of the power adapter into an electrical
wall outlet not controlled by a switch.
The IS9181 displays a progress bar while it initializes - this
could take up to three minutes to complete.
Press STANDBY to activate
the system. When the IS9181
system is ready, the system
setup screen appears on the
display. SelectSelect YES to
continue the system setup.
NOTE: To highlight and select items listed on the display, simply
rotate the dial and press the SELECT key.
1.
2.
3.
Connect to your wireless network
You can either allow the system to search for a wireless
network, or enter the name of a known available network.
To connect to your wireless network by searching for
available networks:
1. Select CHANGE .
2. Select Search for Network and then press SELECT.
3. Find the name of your network in the list and press
SELECT. If at rst you do not see your network in the
list, press BACK and try searching again. If you still do
not see your network after a few tries, you may need to
enter the network name manually. Please see the IS9181
manual for more instructions.
4. To enter your network password, move the rotary dial to
highlight the rst character of your password and press
SELECT to add it to the entry line. Select DELETE to
erase the last character. Repeat this character selection
process until the entire password is displayed.
NOTE: Passwords are case sensitive. If capital letters or
symbols are used, select CAPS or SYMBOLS to display
a list of characters. Select SPACE to insert a blank space.
5. Move the rotary dial to
highlight DONE and
then press SELECT.
The IS9181 now attempts to connect to your wireless
network (this could take up to one minute). Once connected,
you will be asked to set the clock and weather.
