V-tech Learn & Discover Driver User manual

User’s Manual
© 2010 VTech
Printed in China
91-002430-010-000
Learn & Discover DriverTM

Dear Parent,
Ever nice the look on your baby’s face when th learn something
new through their own discovery? ese self-accomplished
moments are a parent’s greatest reward. To help fulfill them,
VTech® created the Infant Learning® series  ts.
ese unique interactive learning ts directly respond to what
children do naturally – play! Using innovative technology, these
ts react to baby’s interactions, making each play perience fun
and unique as th learn age-appropriate concepts like first words,
numbers, shapes, colors and music. More importantly, VTech®’s
Infant Learning® ts develop baby’s mental and physical abilities
by inspiring, engaging and teaching.
At VTech®, we know that a child has the ability to do great things.
at’s why all  our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best  their ability. We thank you for trusting VTech® with the
important job  helping your child learn and grow!
Sincerely,
Your iends at VTech®
To learn more about the Infant Learning® series and her VTech® ts, visit www.vtechkids.com

2
INTRODUCTION
Thank you for purchasing the VTech®Learn & Discover DriverTM
learning toy!
Take a spin down the learning highway with the VTech®Learn &
Discover DriverTM! This role-play toy teaches animals, numbers, colors
and more with fun phrases and realistic car sounds. Baby’s imagination
will soar while spinning the wheel, moving the car and pressing the horn
button. Big location buttons and a trafc light round out the learning.
STEERING WHEEL
GEAR SHIFT
ANIMAL/NUMBER/LOCATION
BUTTONS
HORN BUTTON
MOVING CAR
GAS AND RADIO
BUTTONS
MIRROR
ON/OFF KEY
TRAFFIC LIGHT
MODE SELECTOR
SWITCH
Introduction

33
INCLUDED IN THIS PACKAGE
- One VTech®Learn & Discover DriverTM
- One user’s manual
WARNING: All packing materials, such as tape, plastic sheets,
packing lockers, wire ties and tags are not part of this
toy, and should be discarded for your child’s safety.
NOTE: Please keep user’s manual as it contains important
information.
Unlock the packaging locks:
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit. Use a coin or a
screwdriver to loosen the screw.
3. Install 2 new ‘AA’ batteries following
the diagram inside the battery box.
(The use of new alkaline batteries
is recommended for maximum
performance.)
4. Replace the battery cover and tighten
the screw to secure.
Getting Started
Rotate the packing locks
90 degrees counter-clockwise.
Pull out the packing locks.

4
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before
being charged (if removable).
• Rechargeable batteries are only to be charged under adult
supervision (if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium).
• Only batteries of the same or equivalent type as recommended
are to be used.
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended
number of power supplies.
• Do not dispose of batteries in re.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
PRODUCT FEATURES
1. ON/OFF Key
To turn the unit ON, slide the ON/OFF
KEY to the ON ( ) position. To turn
the unit OFF, slide the ON/OFF KEY
to the OFF ( ) position.
Getting Started/Product Features

5
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Learn & Discover DriverTM will
automatically power-down after approximately 30 seconds without
input. The unit can be turned on again by pressing any button.
ACTIVITIES
1. Turn the ON/OFF KEY to turn the
unit ON. You will hear fun sounds,
a song and a phrase. The lights will
ash with the sounds.
2. Slide the MODE SELECTOR to
choose Animal ( ), Number ( )
or Music ( ) Mode.
3. Press the ANIMAL/NUMBER/
LOCATION BUTTONS to learn
animals in Animal Mode and
numbers in Number Mode. In Music
Mode, pressing the buttons will
play melodies. When melodies are
playing, pressing the buttons will add
fun sounds over the music. The lights
will ash with the sounds.
Activities

6
4. Spin the STEERING WHEEL or
slide the CAR to hear fun sounds,
melodies and phrases. In Animal
Mode, turning the wheel will teach
animals and locations. In Number
Mode, turning the wheel will teach
numbers. In Music Mode, turning
the wheel will activate melodies.
Turning the wheel fast will speed up
the melodies. The lights will ash with
the sounds.
5. Push the GEAR SHIFT up and down
to hear fun sounds and phrases. The
lights will ash with the sounds.
6. Press the GAS BUTTON to hear
fun phrases and sounds. Press the
RADIO BUTTON to hear melodies.
Keep pressing to nd a melody you
like!
7. If there is no input for approximately
10 seconds, you will hear a phrase,
a fun sound or a melody. If there
continues to be no input after another
10 seconds, you will hear a song. If
there is no input for an additional 10
seconds, you will hear “Bye-bye” and
the unit will power down. The unit can
be turned on again by pressing any
button or sliding the mode selector.
Activities
Bye-bye

7
MELODY LIST
1. Alphabet Song
2. The Entertainer
3. Pop! Goes the Weasel
4. Sailing, Sailing
5. Home Sweet Home
6. This Old Man
7. One, Two, Three, Four, Five
8. Skip to My Lou
9. Bingo
10. Row, Row, Row Your Boat
11. Farmer in the Dell
SUNG SONG LYRICS (To the tune of ‘Bingo’)
Just come along, we’ll take a drive.
There’s so much to see!
Stop at school.
To the park.
Beach and more.
Drive along with me!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
Activities/Care & Maintenance

8
TROUBLESHOOTING
If for some reason the program/activity stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new set of
batteries.
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a
service representative will be happy to help you.
For information on this product’s warranty, please call our Consumer
Services Department at 1-800-521-2010 in the U.S. or 1-877-352-
8697 in Canada.
IMPORTANT NOTE:
Creating and developing Infant Learning products is accompanied
by a responsibility that we at VTech ®take very seriously. We make
every effort to ensure the accuracy of the information, which forms
the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products
and encourage you to call our Consumer Services Department at
1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, with
any problems and/or suggestions that you might have. A service
representative will be happy to help you.
Troubleshooting

9
Note:
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
•
Consult the dealer or an experienced radio/TV technician for help
Caution: changes or modications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
Other Info