VADO ZOO Installation and operating instructions

zoo
Vado
Wedmore Road, Cheddar, Somerset, England BS27 3EB
tel [phone]. fax [phone]
[e-mail]
www.vado-uk.com
Guarantee
Customer/technical services
For any technical or installation queries please contact Vado on 01934 745163.
GUARANTEE REGISTRATION
NAME
ADDRESS
RETAILER
ADDRESS
PURCHASE DATE
PRODUCT DESCRIPTION
WHO INSTALLED THE PRODUCT?
FOR VADO USE
POSTCODE
POSTCODE
ARTICLE NUMBER (SEE BOX)
RETAILER PLUMBER BUILDER SELF
This product is guaranteed against manufacturing defects from the date of purchase until the expiry of the relevant
guarantee period shown below.
The guarantee is only valid if:-
1. The product has been installed, used and maintained in accordance with Vado’s instructions and subjected to
normal use only.
2. The defect is not due to use of an unsuitable or inadequate water or power supply.
3. The defect is not due to accident, misuse, neglect or repair other than by Vado or Vado authorised agents or
damage caused by foreign objects or substances.
4. We have received from you the completed Guarantee Registration Form. Vado accepts no responsibility for any
forms lost in the post and returns by registered means is therefore recommended.
Under this guarantee (which is non-transferable) Vado will, at its option, repair or replace free of charge any product
(or replacement part) found to be defective. The guarantee does not extend to any consequential loss or damage.
After repair or replacement the relevant guarantee period will be calculated from the original date of purchase.
The relevant guarantee periods are:-
1. Twelve years on chrome nish products.
2. Six years on Vado Identity products.
3. Three years on all other products with the exception of Stuart Turner Pumps which carry a 2 year Guarantee on
Monsoon Range and 1 Year Guarantee on Showermate Range.
All claims under the guarantee must be submitted in writing to the person who supplied the product to you and
must be received no later than the last day of the relevant guarantee period. All claims must be accompanied by
proof of purchase (sales receipt or delivery note).
Vado operates a policy of continuous product development and therefore reserves the right to change the product,
packaging and documentation specications without notice.
This guarantee is in addition to and does not aect your statutory rights as a consumer.
Single function deck mounted shower kit
Installation & maintenance instructions
Please leave these instructions with the customer

Important - please read
27
Installers/users notes
Please read these instructions carefully before starting installation and keep for future
reference.
Remove all packaging and check the product for missing parts or damage before
starting installation.
Any alterations made to this product and ttings may infringe water regulations and
will invalidate the guarantee.
The installation must comply with all Local/National Water Supply Authority
Regulations/Byelaws and Building and Plumbing (UK:BS6700) Regulations.
We strongly recommend that you use a qualied and registered plumber.

6
Dimensions
3
Maintenance
To ensure a smooth operation, periodically apply a suitable silicone lubricant to the hose.
Please note an oil based lubricant should not be used.
Care of the riser rail
Our products are nished to the highest standard and due care needs to be taken to
ensure their looks are retained.
We recommend cleaning all products with a soft damp cloth ONLY and advise strongly
against the use of ALL cleaning products i.e. powders and liquids.
If the above instructions are not followed this will invalidate your guarantee in the
event of a problem occurring.
To remove any build up of limescale on the
shower head, just rub your ngers lightly over
the nozzles.
37mm47mm
185mm
60mm
¾"
28mm

Installation - riser rail
45
Installation - riser rail
Pull o the cover from the Holder.
Remove the nut, metal washer and
rubber washer from the bottom of the
threaded tube.
Insert the holder down through the
hole in the unit, make sure that the
rubber washer is against the top
surface.
From the underside slide the rubber
washer, metal washer and screw on the
nut (removed earlier) and tighten.
CAUTION: Do not over tighten the nut
as this may damage the unit.
Replace the cover.
Push the smaller end of the shower
hose down through the holder.
Nut
Metal washer
Rubber washer
Threaded tube
Rubber washer
Metal washer
Holder
Place a rubber washer into the cone
at the end of the hose and screw in
the handset.
Place the cone into the holder.
Connect the other end of the hose
to the supply, the unit comes with
an adaptor and washer if necessary.
Cover
Shower
hose
Cone
Shower
hose
Washer
Washer
Adaptor
Handset
Shower
hose
Holder
Cover
Water supply