Page: 7
INSTRUCTIONS
GRACO™ TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptor
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Tilt the rear of the car seat so that the hooks
engage over the rear bar. Tilt the seat forward until
you hear it click securely onto the adaptor. Test the
car seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible.
4>TO REMOVE THE SEAT
(a) Squeeze the buckle to release the security straps.
(b) Operate the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
PEG PEREGO™TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptor
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Hold the car seat directly over the adaptor, align
the locking brackets in the base of the seat with the
locking uprights on the adaptor. Push down on the
seat firmly until you feel the locking uprights click
into place. Test the car seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible.
4>TO REMOVE THE SEAT
(a) Squeeze the buckle to release the security straps.
(b) Operate the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
MAXI COSI™ MICO & CHICCO™
TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptors
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Place the car seat so that it engaged over the rear
bar. The Maxi Cosi Car Seat will rest on the bar. The
Chicco Car Seat will click into the bar. Test the car
seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible. Make sure Maxi Cosi Car Seat is
secure in the straps.
4>TO REMOVE THE SEAT
(a) Squeeze the clasp to release the security straps.
(b) Press the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
BRITAX™ CHAPARONE TRAVEL SYSTEM
1>PARTS LIST
(a) 1x infant car seat adaptors
(b) 2x security straps
2>REMOVE BUMPER BAR
(a) Refer to your stroller product guide
3>INSTALLING YOUR INFANT CAR SEAT
(a) Install adaptor inserting each connector directly
into the bumper bar housing.
(b) Test the adaptor is securely attached.
(c) Tilt the rear of the car seat so that the hooks
engage over the rear bar. Tilt the seat forward until
you hear it click securely onto the adaptor. Test the
car seat is securely attached.
(d) Attach safety strap onto both sides of stroller by
looping the black strap through the slit in the rectan-
gular metal piece.
(e) Fasten the buckles and adjust the straps to be as
tight as possible.
4>TO REMOVE THE SEAT
(a) Squeeze the clasp to release the security straps.
(b) Press the release catch at the rear of the seat
while lifting the seat vertically.
5>TO REMOVE THE ADAPTOR
(a) Push both side buttons to release the bumper bar
and lift vertically.
