Vaniman 96028 User manual

MUFFLER
96028
25799 Je󰀨erson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) www.vaniman.com  [email protected]
MUFFLER-I-02/22 PAGE 1
PACKING LIST
1 - Mu󰀪er
2 - Adapters (VMC-1006A)
RECOMMENDED USAGE
1. Vaniman's Mu󰀪er is designed to help reduce excessive suction noise at workstations connected to a
dust collector for a better user experience.
2. The Mu󰀪er should be added in the plumbing line between the workstation accessory or attachments
and the dust collection unit. Placing the Mu󰀪er as close to the workstation accessory or attachments
as possible will help to reduce the most amount of noise.
ASSEMBLY INSTRUCTIONS
1. Remove the Mu󰀪er and adapters from its packaging.
2. The Mu󰀪er can be connected to 1.5" and 2.5" plumbing:
A. 1.5" Plumbing Connection: Use the two VMC-1006A adapters to connect 1.5" plumbing connections
to the Mu󰀪er. Slide the adapters over the 1.5" hose or piping, then slide the plumbing with the
adapter into one end of the Mu󰀪er (direction does not matter). Complete the same process for the
other end of the Mu󰀪er.
B. 2.5" Plumbing Connection: Slide the 2.5" hose end or piping directly into one end of the Mu󰀪er
until secure. Complete the same process for the other end of the Mu󰀪er.

MUFFLER
96028
25799 Je󰀨erson Ave. Murrieta, CA 92562 1-800-VANIMAN (826-4626) www.vaniman.com  [email protected]
MUFFLER-I-02/22 PAGE 2
MUFFLER CONNECTION GUIDE
1.5" Hose to 1.5" Accessory Connection 2.5" Hose to 2.5" Accessory Connection
1.5" Hose to 2.5" Accessory Connection 2.5" Hose to 1.5" Accessory Connection
Muer - 96028
VMC-1006A 1.5” Accesory
1.5” Grey Hose
1450
1.75” Hose End
VMC-1009
Muer - 96028
VMC-1006A1.5” Grey Hose
1450
1.75” Hose End
VMC-1009
2.5” Accessory
Muer - 96028
2.5”White Hose
VMC-1023
VMC-1006A
1.5” Accessory
Muer - 960282.5”White Hose
VMC-1023
2.5” Accessory