Vantron VT-SBC-EKT User manual

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual www.vantrontech.com
VT-SBC-EKT Single Board Computer
User Manual
Version: 1.0
© Chengdu Vantron Technology Co., Ltd. All rights reserved.

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT- SBC-EKT | User Manual www.vantrontech.com
Revision History
No. Version Description Date
1 V1.0 First release Jul. 20, 2022

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT- SBC-EKT | User Manual www.vantrontech.com
Table of Contents
Foreword ......................................................................................................................................... 1
CHAPTER 1 INTRODUCTION ........................................................................................................... 5
1.1 Product Overview............................................................................................................. 6
1.2 Terminology/Acronym......................................................................................................6
1.3 Block Diagram .................................................................................................................. 7
1.4 Specifications ................................................................................................................... 8
1.5 Operating system ............................................................................................................. 9
1.6 Mechanical Dimensions ...................................................................................................9
1.7 Power Supply and Consumption ......................................................................................9
1.8 Environmental Specifications...........................................................................................9
CHAPTER 2 CONNECTORS AND PIN ASSIGNMENT.......................................................................10
2.1 SBC Layout...................................................................................................................... 11
2.2 System Configurations.................................................................................................... 11
2.2.1 CPU................................................................................................................................. 11
2.2.2 Memory.......................................................................................................................... 11
2.2.3 Storage ........................................................................................................................... 11
2.3 Connectors and Jumpers................................................................................................ 12
2.3.1 J2/J1 Power input (1)...................................................................................................... 12
2.3.2 J10/J11 Ethernet port (2) ...............................................................................................13
2.3.3 J39 LVDS/eDP connector (3)........................................................................................... 13
2.3.4 J22 HDMI (4)................................................................................................................... 15
2.3.5 J16 DP (5) ....................................................................................................................... 15
2.3.6 J10/J11 USB 2.0 port (6).................................................................................................16
2.3.7 U26 USB 3.0 port (7) ......................................................................................................17
2.3.8 J7/J8 USB 2.0 connector (8) ...........................................................................................17
2.3.9 J20/J21 RS422 (9) ........................................................................................................... 18
2.3.10 J18/J19 RS232 (10) .........................................................................................................18
2.3.11 J31 RS485/RS232 (11) ....................................................................................................19
2.3.12 J4 Audio jacks (12).......................................................................................................... 20
2.3.13 J19/J22 Speaker connectors (13)....................................................................................20
2.3.14 J24/J25/J26/J27 GPIO (14) ............................................................................................. 21
2.3.15 J38 SPI (15) ..................................................................................................................... 22
2.3.16 J33/J34 CAN (16) ............................................................................................................22
2.3.17 J36 I2C (17) ..................................................................................................................... 23
2.3.18 J29 RTC battery connector (18) ......................................................................................23
2.3.19 J23 TP connector (19)..................................................................................................... 24
2.3.20 J40 Backlight connector (20) ..........................................................................................24
2.3.21 J16 SATA connector (21).................................................................................................25
2.3.22 J17 SATA power connector (22)...................................................................................... 25
2.3.23 J9 Debug connector (23) ................................................................................................25
2.3.24 J13 SIM card slot (24) ..................................................................................................... 26
2.3.25 U11 DDR4 SO-DIMM socket (25)....................................................................................26

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT- SBC-EKT | User Manual www.vantrontech.com
2.3.26 J12 M.2 B-Key slot (26)................................................................................................... 26
2.3.27 J17 M.2 E-Key slot (27)...................................................................................................26
2.3.28 J30 PBTN/REST/LED (28).................................................................................................27
CHAPTER 3 SOFTWARE.................................................................................................................28
3.1 BIOS Setup...................................................................................................................... 29
3.1.1 BIOS Introduction........................................................................................................... 29
3.1.2 Entering Setup................................................................................................................29
3.1.3 Main ............................................................................................................................... 30
3.1.4 Advanced........................................................................................................................ 31
3.1.5 Security .......................................................................................................................... 32
3.1.6 Power ............................................................................................................................. 32
3.1.7 Boot................................................................................................................................ 33
3.1.8 Exit.................................................................................................................................. 34
3.2 Install Windows 10 System............................................................................................. 35
3.2.1 Prerequisites .................................................................................................................. 35
3.2.2 Make a Bootable USB Drive for Windows 10 .................................................................35
3.2.3 Install Windows 10.........................................................................................................36
3.3 GPIO & COM................................................................................................................... 36
CHAPTER 4 DISPOSAL AND WARRANTY ....................................................................................... 37
4.1 Disposal .......................................................................................................................... 38
4.2 Warranty ........................................................................................................................ 39

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 1 www.vantrontech.com
Foreword
Thank you for purchasing VT-SBC-EKT single board computer (“the Board” or “the Product”).
This manual intends to provide guidance and assistance necessary on setting up, operating or
maintaining the Product. Please read this manual and make sure you understand the
functionality of the Product before putting it into use.
Intended Users
This manual is intended for:
•Embedded software developer
•Custom development software engineer
•Other technically qualified personnel
Copyright
Chengdu Vantron Technology Co., Ltd. (“Vantron”) reserves all rights of this manual, including
the right to change the content, form, product features, and specifications contained herein
at any time without prior notice. An up-to-date version of this manual is available at
www.vantrontech.com.
The trademarks in this manual, registered or not, are properties of their respective owners.
Under no circumstances shall any part of this user manual be copied, reproduced, translated,
or sold. This manual is not intended to be altered or used for other purposes unless otherwise
permitted in writing by Vantron. Vantron reserves the right of all publicly released copies of
this manual.
Disclaimer
While all information contained herein has been carefully checked to assure its accuracy in
technical details and typography, Vantron does not assume any responsibility resulting from
any error or features of this manual, nor from improper uses of this manual or the software.
It is our practice to change part numbers when published ratings or features are changed, or
when significant construction changes are made. However, some specifications of the Product
may be changed without notice.

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 2 www.vantrontech.com
Technical Support and Assistance
Should you have any question about the Product that is not covered in this manual, contact
your sales representative for solution. Please include the following information in your
question:
•Product name and PO number;
•Complete description of the problem;
•Error message you received, if any.
US Office: Vantron Technology, Inc.
Address: 48434 Milmont Drive, Fremont, CA 94538
Tel: [phone]
Email: [e-mail]
China Office: Chengdu Vantron Technology Co., Ltd.
Address: 6th Floor, 1st Building, No.9, 3rd WuKe East Street, WuHou District, Chengdu, P.R.
China 610045
Tel: [phone]/3931, 86-28-8515-7572/6320
Email: [e-mail]
Symbology
This manual uses the following signs to prompt users to pay special attention to relevant
information.
Caution for latent damage to system or harm to personnel
Attention to important information or regulations

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 3 www.vantrontech.com
General Safety Instructions
The Product is supposed be installed by knowledgeable, skilled persons familiar with local
and/or international electrical codes and regulations. For your safety and prevention of
damage to the Product, please read and observe carefully the following safety instructions
prior to installation and operation. Keep this manual well for future reference.
•Do not disassemble or otherwise modify the Product. Such action may cause heat
generation, ignition, electronic shock, or other damages including human injury, and may
void your warranty.
•Keep the Product away from heat source, such as heater, heat dissipater, or engine casing.
•Do not insert foreign materials into any opening of the Product as it may cause the Product
to malfunction or burn out.
•To ensure proper functioning and prevent overheating of the Product, do not cover or
block the ventilation holes of the Product.
•Follow the installation instructions with the installation tools provided or recommended.
•The use or placement of the operation tools shall comply with the code of practice of such
tools to avoid short circuit of the Product.
•Cut off the power before inspection of the Product to avoid human injury or product
damage.

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 4 www.vantrontech.com
Precautions for Power Cables and Accessories
Use proper power source only. Make sure the supply voltage falls within the specified
range.
Place the cables properly at places without extrusion hazards.
There is a coin cell battery for powering the RTC. Therefore, please avoid short circuit of
the battery during transportation or operation at high temperatures.
Cleaning instructions:
•Power off before cleaning the Product
•Do not use spray detergent
•Clean with a damp cloth
•Do not try to clean exposed electronic components unless with a dust collector
Power off and contact Vantron technical support engineer in case of the following faults:
•The Product is damaged
•The temperature is excessively high
•Fault is still not solved after troubleshooting according to this manual
Do not use in combustible and explosive environment:
•Keep away from combustible and explosive environment
•Keep away from all energized circuits
•Unauthorized removal of the enclosure from the device is not allowed. Do not
change components unless the power cable is unplugged. In some cases, the device
may still have residual voltage even if the power cable is unplugged. Therefore, it is
a must to remove and fully discharge the device before replacement of the
components.

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 5 www.vantrontech.com
CHAPTER 1
INTRODUCTION

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 6 www.vantrontech.com
1.1 Product Overview
VT-SBC-EKT single board is powered by Intel® Elkhart Lake Atom® x6425E high-performance
processor that has four cores capable of delivering high computing power for various
embedded applications while keeping the CPU performance at a maximum of 15W power
consumption. The Board supports two Ethernet ports transmitting at 10/100/1000Mbps.
As to internal expansion, the box offers two M.2 slots, one for Wi-Fi and BT and the other
optionally expandable for 4G/5G connection to keep the communication uninterrupted.
The board comes with an HDMI interface, a DP interface, and an LVDS/eDP connector to
optimize image display. Five serial connectors are available to communicate with external
devices to ensure a reliable, error-free data path.
Above all, its strong performance, stable quality, and excellent cost performance are second
to none for smart business applications, making it a reliable solution for industrial IoT
applications.
1.2 Terminology/Acronym
Terminology/Acronym Description
NC No connection
VCC
Voltage common collector
GND
Ground
/
Active low signal
+
Positive of difference signal
-
Negative of difference signal
I
Input
O
Output
I/O
Input/output
P
Power or ground
A
Analog
OD
Open drain
CMOS
3.3 V CMOS
LVCMOS
Low Voltage CMOS
LVTTL
Low Voltage TTL
3.3V
3.3 V signal level

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 7 www.vantrontech.com
1.3 Block Diagram
Processor
Intel® ATOM™
X6000 Series
ELKHART
Max Quad-Core
Up to 3.0GHz
6-12W
HDMI
Connector
2*USB3.0
DDI2
USB3[0:1]&USB2[0:1]
DC/DCs
Converter
SIO
SCH3222
eSPI
Conn
IC
12-36VDC(96W)
2xRS232/RS485/RS422
1xRS232
1xRS-232/TTL Header
System
Power
DC
JACK
DDI1DP
Connector
ES8336 3.5mm
Headphone
I2S
LAN7430 10/100/1000M
RJ45
PCIE[3]
LAN7430 10/100/1000M
RJ45
PCIE[2]
WDT
Single Board Computer
Temperature: -40 ~ 85C
Board size: 146 x 102 mm
OS:Windows 10, Linux
Heat sink
1x260 Sodimm DDR4
Support 16GB max
M.2 B-Key
Support 512GB max
SATA Slot
Support 2TB max
EMMC 5.1
Support 64GB max
EMMC
DDR
SATA[1]/USB3[2]/USB2[8]
SATA[0]
M.2 E-KEY
PCIE[5]
+USB2[9]
Buzzer(9.5x7.6mm)GPIO
4*GPIO Connector
2x4,2mm
GPIO
40pin JAE
Connector
EDP（DDI0）
PTN3460
LVDS
1*USB2.0 Internal Header
2x5,2.54x2.54mm
1xI2C Connector
1x3,2.00mm
TPM2.0
SIM Slot
2xSpeaker Connector
2W/4R
RTC
1x2,1mm
BIOS
Power&Reset BTN Header
2x4,2.54x2.54mm
I2C
1xCAN Connector
2x2,3.00mm
1xSPI Connector
1x6,1.25mm SPI[1]
1xUART Connector
UART
TPA3110D2PWP
CAN TJA1042TK3
ECE1200
LPC
1xPort80 Connector
2x4,2mm
GPIO
USB2[4]
SPI[0]
MDI
MDI
2*USB2.0
USB2[2:3]
USB2[6:7]
1*USB2.0 HDR
1x4,2mm
1*USB2.0 HDR(For TP)
1x5,1.5mm
USB2[5]
PCIE[4] OPTION

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 8 www.vantrontech.com
1.4 Specifications
VT-SBC-EKT
System
CPU
Intel® Elkhart Lake Atom® x6425E processor, Quad-core, 3.0GHz (Max.)
Memory
1 x DDR4 SO-DIMM socket, 3200MT/s, up to 16 GB
Storage
64GB on-board eMMC (optional)
M.2 SSD supported (up to 256GB)
1 x SATA Gen 3 slot (6Gb/s, up to 2TB)
Communication
Ethernet
2 x RJ45, 10/100/1000 Base-T, LAN7430
Wi-Fi & BT
Supported (expansion by an M.2 E-Key slot)
4G/5G
Supported (expansion by an M.2 B-Key slot)
Media
Display
1 x HDMI 2.0b, 4096 x 2160 @60Hz
1 x DP 1.4, 7680 x 4320 @60Hz
1 x Dual LVDS/eDP connector, up to 3840 x 2160 @30Hz
Audio
1 x Headphone jack
1 x 3.5mm Microphone jack
2 x 2W/8R Speaker connector
I/Os
Serial
2 x RS422 connector
2 x RS232 connector
1 x RS232/RS485 connector
USB
2 x USB 2.0 Host (Type-A)
2 x USB 3.0 Host (Type-A)
2 x USB 2.0 connector
RTC
Supported
Watchdog
Supported
SATA
1 x SATA Gen3 slot
Power
1 x Power connector
1 x Power jack
SIM card slot
1 x Micro SIM card slot
Expansion
M.2
1 x M.2 B-Key, for SSD (2242) or 4G/5G (3052)
1 x M.2 E-Key, for Wi-Fi & BT (2230)
GPIO
4 x GPIO
CAN
2 x CAN
SPI
1 x SPI
System control
Button
1 x Power button
Security
TPM
TPM 2.0 supported
Power
Input
12-36V DC
Consumption
15W+
Software
Operating
system
Linux, Windows 10
SDK
SDK available
Mechanical
Dimensions
153.5 x 123 mm
Cooling mode
Aluminum alloy heat sink (fanless)
Environment
Condition
Temperature
Operating: -20°C ~ +60°C
Storage: -40°C ~ +85°C
Humidity
5%-95%RH (Non-condensing)
Certifications
UL, FCC, IC, CE, RoHS, PTCRB

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 9 www.vantrontech.com
1.5 Operating system
VT-SBC-EKT supports Linux and Windows operating systems.
1.6 Mechanical Dimensions
•153.5mm x 123mm
1.7 Power Supply and Consumption
VT-SBC-EKT works with 12V-36V DC power supply with 1.5A current recommended.
The power consumption of the Board is about 40W with speakers functioning and 15W
with speakers not working. It should be pointed out that the power consumption is largely
dependent on the RAM, storage capacity, and other configurations of the Board.
1.8 Environmental Specifications
VT-SBC-EKT works at a temperature ranging from -20℃to +60℃, at relative humidity of
5%-95% for non-condensing purpose, and is designed to be stored at a temperature ranging
from -40℃to +85℃.

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 10 www.vantrontech.com
CHAPTER 2
CONNECTORS AND PIN ASSIGNMENT

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 11 www.vantrontech.com
2.1 SBC Layout
2.2 System Configurations
2.2.1 CPU
VT-SBC-EKT is powered by Intel® Elkhart Lake Atom® x6425E quad-core processor.
2.2.2 Memory
VT-SBC-EKT provides a DDR4 SO-DIMM socket, supporting up to 16GB memory with transfer rate
at 3200MT/s.
2.2.3 Storage
Depending on customer requests, the Board may provide 64GB on-board eMMC. The
storage capacity is also expandable via an M.2 B-Key slot that supports up to 256GB storage,
and a SATA Gen 3 slot that supports up to 3TB storage with transfer rate at 6Gb/s.
(2) ETH 1
(
6)
USB 2.0
(2) ETH 2
(
6) USB 2.0
(7) USB 3.0
(12) Audio
(13) SPK_R
(13) SPK_L
(16) CAN
(14) GPIO 0 – GPIO 3
(15) SPI
(11) RS485/232
(10) RS232
(10) RS232
(9) RS422
(9) RS422
(18) RTC
(23) Debug
(17) I2C
(24) SIM card slot
(3) LVDS
(20) Backlight
(19) TP
(21) SATA
(8) 2 x USB 2.0
(22) SATA power
Buzzer
(28)
PBTN/REST/LED
(1) DC IN
(1) DC IN
(4) HDMI
(5) DP
(26) M.2 for
5G/SSD
(27) M.2 for
Wi-Fi &BT
(25) DDR4 SO-
DIMM socket

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 12 www.vantrontech.com
2.3 Connectors and Jumpers
This section is going to brief on the connectors/jumpers with corresponsive pinout
description.
2.3.1 J2/J1 Power input (1)
VT-SBC-EKT provides a 4-pin power connector and a power jack to supply power for the
Board.
Specification of the power connector: 2.54mm, 10.0mm (H), 5A, Male, Vertical, White,
WDT, THR, RoHS
TYCO: 640456_W3
Specification of the power jack: 6mm, 10mm (H), Male, WDT, THR, RoHS
CUIINC: PJ-082BH
J2 Power connector J1 Power jack
Pinout description of the 4-pin power connector:
Pin Signal Description
1
+VDC
DC-IN POWER +
2
+VDC
DC-IN POWER +
3
GND
Ground
4
GND
Ground
Pinout description of the power jack:
Pin Signal Description
1
+VDC
DC-IN POWER +
2
GND
Ground
3
GND
Ground
4
GND
Ground
5
GND
Ground
6
GND
Ground
Pin 1

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 13 www.vantrontech.com
2.3.2 J10/J11 Ethernet port (2)
VT-SBC-EKT offers two RJ45 Ethernet jacks each with two LEDs (L-Y, R-G), green for activity
indication and yellow for link indication. The interfaces support 10/100/1000 Mbps
transmission rate.
Pinout description:
Pin
Signal
Description
1
L_MDI_0P
Ethernet MDI0+ Signal
2
L_MDI_0N
Ethernet MDI0- Signal
3
L_MDI_1P
Ethernet MDI1+ Signal
4
L_MDI_1N
Ethernet MDI1- Signal
5
L_MDI_2P
Ethernet MDI2+ Signal
6
L_MDI_2N
Ethernet MDI2- Signal
7
L_MDI_3P
Ethernet MDI3+ Signal
8
L_MDI_3N
Ethernet MDI3- Signal
2.3.3 J39 LVDS/eDP connector (3)
VT-SBC-EKT offers a dual LVDS/eDP connector for connection of a display.
Specification: 1 x 40, 0.5mm, 0.5A, 1.0mm (H), Right Angle, WDT, SMT, RoHS
IPEX: 20455C4
Pinout description:
Pin Signal Description
1 LVDS_B_D0- LVSAE_DATA
2 LVDS_B_D0+ LVSAE_DATA
3 LVDS_B_D1- LVSAE_DATA
4 LVDS_B_D1+ LVSAE_DATA
5 LVDS_B_D2- LVSAE_DATA
6 LVDS_B_D2+ LVSAE_DATA
Pin 1
Ethernet port
Ethernet port

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 14 www.vantrontech.com
7 GND Ground
8 LVDS_B_CLK- LVSAE_CLOCK
9 LVDS_B_CLK+ LVSAE_CLOCK
10 LVDS_B_D3- LVSAE_DATA
11 LVDS_B_D3+ LVSAE_DATA
12 LVDS_A_D0- LVSDO_DATA
13 LVDS_A_D0+ LVSDO_DATA
14 GND Ground
15 LVDS_A_D1- LVSDO_DATA
16 LVDS_A_D1+ LVSDO_DATA
17 LCD_DETECT- LVDS DETECT
18 LVDS_A_D2- LVSDO_DATA
19 LVDS_A_D2+ LVSDO_DATA
20 LVDS_A_CLK- LVSDO_CLOCK
21 LVDS_A_CLK+ LVSDO_CLOCK
22 LVDS_A_D3- LVSDO_DATA
23 LVDS_A_D3+ LVSDO_DATA
24 GND Ground
25 GND Ground
26 NC
27 NC
28 VDD_LCD LCD POWER +5V
29 VDD_LCD LCD POWER +5V
30 VDD_LCD LCD POWER +5V
31 SEL 6/8 SELECT 6 OR 8 DEPTH
32 LCD_BKLTEN LCD BKL ENABLE
33 LCD_BKLT_PWM LCD BKL PWM
34 GND Ground
35 GND Ground
36 GND Ground
37 VCC_BLK BKL Power+
38 VCC_BLK BKL Power+
39 VCC_BLK BKL Power+
40 VCC_BLK BKL Power+

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 15 www.vantrontech.com
2.3.4 J22 HDMI (4)
VT-SBC-EKT offers an HDMI 2.0b interface that supports resolution of 4096 x 2160 @60Hz.
Specification: Type-A, FLN, Female, Right Angle, WDT, SMT, RoHS
MOLEX: 47151-0001
Pinout description:
Pin
Signal
Description
1 HDMI_DATA2+ HDMI DATA
2 GND Ground
3 HDMI_DATA2- HDMI DATA
4 HDMI_DATA1+ HDMI DATA
5 GND Ground
6 HDMI_DATA1- HDMI DATA
7 HDMI_DATA0+ HDMI DATA
8 GND Ground
9 HDMI_DATA0- HDMI DATA
10 HDMI_CLK+ HDMI CLK
11 GND Ground
12 HDMI_CLK- HDMI CLK
13 NC
14 NC
15 HDMI_DDC_SCL HDMI DDC I2C CLK
16 HDMI_DDC_SDA HDMI DDC I2C DATA
17 GND Ground
18 VCC_HDMI HDMI POWER +5V
19 HDMI_HPD HDMI HOT PLUG DETECTION
2.3.5 J16 DP (5)
VT-SBC-EKT offers a DP 1.4 interface that supports resolution of 7680 x 4320 @60Hz.
Specification: Type-A, FLN, Female, Right Angle, WDT, SMT, RoHS
HONG SHENG RONG: DP-RT04-1015

Vantron | Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC-EKT | User Manual 16 www.vantrontech.com
Pinout description:
Pin Signal Description
1 DP_DATA0+ DP DATA
2 GND Ground
3 DP_DATA0- DP DATA
4 DP_DATA1+ DP DATA
5 GND Ground
6 DP_DATA1- DP DATA
7 DP_DATA2+ DP DATA
8 GND Ground
9 DP_DATA2- DP DATA
10 DP_DATA3+ DP DATA
11 GND Ground
12 DP_DATA3- DP DATA
13 CONFIG1
14 CONFIG2
15 DP_AUX- DP_AUX
16 GND Ground
17 DP_AUX+ DP_AUX
18 DP_HPD DP HOT PLUG DETECTION
19 RETURN
20 PWR_3.3V DP POWER +3.3V
2.3.6 J10/J11 USB 2.0 port (6)
The two USB 2.0 Type-A interfaces on VT-SBC-EKT are designed to connect peripherals to
expand the functions.
Specification: 2.0, Type-A, Female, Right Angle, Retention, WDT, THR, RoHS
NSD: ZLRJ-010A
The pinout description of the interfaces is in line with the pin assignment of standard USB
2.0 Type-A.
USB 2.0
USB 2.0