VARO POWERPLUS POWX00416 User manual

POWX00416 EN
Copyright © 2022 VARO P a g e | 1www.varo.com
1INTENDED USE..............................................................................2
2DESCRIPTION (FIG. A) ..................................................................2
3PACKAGE CONTENT LIST............................................................2
4SYMBOLS.......................................................................................2
5GENERAL POWER TOOL SAFETY WARNINGS .........................3
5.1 Working area..........................................................................................................3
5.2 Electrical safety .....................................................................................................3
5.3 Personal safety......................................................................................................3
5.4 Power tool use and care........................................................................................4
5.5 Service....................................................................................................................4
6MACHINE-SPECIFIC SAFETY WARNINGS..................................4
7OPERATION....................................................................................5
7.1 Driver bits (Fig.1)...................................................................................................5
7.2 Charging procedure (Fig.2)...................................................................................5
7.3 Green indicator lights............................................................................................5
7.4 LED work light (Fig. 3)...........................................................................................5
7.5 Forward / reverse rotation control (Fig. 4) ...........................................................5
7.6 Screwdriving..........................................................................................................6
8CLEANING AND MAINTENANCE .................................................6
8.1 Cleaning.................................................................................................................6
8.2 Maintenance...........................................................................................................6
9TECHNICAL DETAILS....................................................................6
10 NOISE..............................................................................................6
11 WARRANTY....................................................................................6
12 ENVIRONMENT ..............................................................................7
13 DECLARATION OF CONFORMITY ...............................................8

POWX00416 EN
Copyright © 2022 VARO P a g e | 2www.varo.com
PRECISION SCREW DRIVER 4 V
POWX00416
1 INTENDED USE
The power tool is intended for driving through wood and plastics.
It is not designed for professional use.
WARNING! Read this manual and general safety instructions carefully
before using the appliance, for your own safety. Your power tool should
only be passed on together with these instructions.
2 DESCRIPTION (FIG. A)
1. Bit holder
2. Charging indicator
3. Charging socket
4. Forward/reverse button
5. LED Working light
6. LED light button
7. Micro USB cable
3 PACKAGE CONTENT LIST
▪Remove all packaging materials.
▪Remove remaining packing and package inserts (if included).
▪Check that the package contents are complete.
▪Check the appliance, the power cord, the power plug and all accessories for
transportation damage.
▪Keep the packing materials as far as possible till the end of the warranty period. Dispose
it into your local waste disposal system afterwards.
WARNING: Packaging materials are not toys! Children must not play with
plastic bags! Danger of suffocation!
1 x cordless precision screw driver
1 x manual
1 x micro USB cable
15 x 28mm bits (PH0x3pcs, PH1x3pcs, PH2x3pcs, SL1.5x2pcs, SL2.5x2pcs, SL3.0x2pcs)
1 x storage case
If any parts are missing or damaged, please contact your dealer.
4 SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the
tool.
In accordance with essential
requirements of the European
directive(s).
Wear eye protection.
Wear gloves.

POWX00416 EN
Copyright © 2022 VARO P a g e | 3www.varo.com
Read manual before use.
5 GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and instructions. Failure to heed warnings and follow instructions
may result in electric shock, fire and/or serious injury. Keep safety warnings and instructions
for future reference. The term "power tool" in the safety warnings refers to your mains-
operated (corded) power tool or battery- operated (cordless) power tool.
5.1 Working area
▪Keep working area clean and well lit. Untidy and dark areas can lead to accidents.
▪Do not operate power tools in potentially explosive surroundings, for example, in the
presence of inflammable liquids, gases or dust. Power tools create sparks which may
ignite the dust or fumes.
▪Keep children and bystanders at a distance when operating a power tool. Distractions can
cause you to lose control of it.
5.2 Electrical safety
▪Always check that the power supply corresponds to the voltage on the rating plate.
▪Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
adapter plugs with earthed power tools. Unmodified plugs and matching outlets will
reduce the risk of an electric shock.
▪Avoid body contact with earthed surfaces such as pipes, radiators, kitchen ranges and
refrigerators. There is an increased risk of an electric shock if your body is earthed.
▪Do not expose power tools to rain or wet conditions. If water gets inside a power tool, it
will increase the risk of an electric shock.
▪Do not damage the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep the cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of an electric shock.
▪When operating a power tool outdoors, use an extension cable suitable for outdoor use.
Using a cord suitable for outdoor use reduces the risk of an electric shock.
▪If operating a power tool in a damp location is unavoidable, use a power supply protected
by a residual current device (RCD). Using an RCD reduces the risk of an electric shock.
5.3 Personal safety
▪Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol
or medication. A moment of inattention when operating a power tool may result in serious
personal injury.
▪Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
▪Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
▪Remove any adjusting keys or spanners before turning on the power tool. A spanner or
key left attached to a rotating part of the power tool may result in personal injury.
▪Do not reach out too far. Keep your feet firmly on the ground at all times. This will enable
you retain control over the power tool in unexpected situations.
▪Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.

POWX00416 EN
Copyright © 2022 VARO P a g e | 4www.varo.com
▪If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4 Power tool use and care
▪Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
▪Do not use the power tool if the switch cannot turn it on and off. A power tool with a
broken switch is dangerous and must be repaired.
▪Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
▪Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
▪Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power
tools.
▪Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
▪Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5 Service
▪Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 MACHINE-SPECIFIC SAFETY WARNINGS
▪Hold power tool by insulated gripping surfaces, when performing an operation where the
fastener may contact hidden wiring. Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the operator an electric shock.
▪Protect the battery charger from rain and moisture. The penetration of water in a battery
charger increases the risk of electric shock.
▪Recharge only with the charger specified by the manufacturer. A charger that is suitable
for one type of battery, it may create a risk of fire when used with another battery.
▪Do not charge other batteries. The battery charger is suitable only for charging our lithium
ion batteries within the listed voltage range. Otherwise there is danger of fire and
explosion.
▪Keep the battery charger clean. Contamination may cause the danger of electric shock.
▪Check the battery charger, cable and plug each time before using. Do not use the battery
charger when defects are detected. Do not open the battery charger yourself and have it
repaired only by qualified personnel using original spare parts. Damaged battery
chargers, cables and plugs increase the risk of electric shock.
▪Do not operate the battery charger on easily inflammable surfaces (e. g. paper, textiles,
etc.) or in combustible environments. There is danger of fire due to the heating of the
battery charger during charging.
▪Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
▪Do not open the battery yourself. There is danger of a short circuit.

POWX00416 EN
Copyright © 2022 VARO P a g e | 5www.varo.com
▪Protect the battery against heat, e.g., including against continuous sun irradiation and fire.
There is a danger of explosion.
▪Do not short-circuit the battery. There is a danger of explosion.
▪In case of damage and improper use of the battery, vapours may be emitted. In case of
complaints, provide for fresh air and consult a physician. The vapours can irritate the
respiratory system.
7 OPERATION
7.1 Driver bits (Fig.1)
▪Different driver bits can be used with this product depending on the screw heads being
worked with. Use the driver bits which are 28 mm long supplied.
▪To install the bits, insert the desired bit into the bit holder (1) until it is properly fixed.
▪To remove the bits, pull it out carefully from the bit holder (1).
7.2 Charging procedure (Fig.2)
The battery of this product is integrated in this tool and cannot be removed.
The battery has been shipped in a low charge condition. Charge it fully before first use. The
screwdriver is supplied with a USB charging cable. The small connector is a type Micro USB
and the large connector is a standard type USB A connector. This means the screwdriver can
be charged via any USB A output socket, either from a USB adapter (smartphone) or power
bank, laptop etc.
▪Plug the Micro USB connector into the charging socket (3).
▪Connect the USB A connector to any USB A output socket or USB adapter (not included).
▪Connect the USB adapter (not included) to the mains power supply.
▪The charging indicator (2) shows the charging status. (see paragraph 7.3 below)
▪After charging is finished, disconnect the USB cable from the screwdriver.
During the charging procedure, the handle of the machine warms up. This
is normal.
When the charging is finished, disconnect the battery charger from the
socket.
Do not use the machine during the charging procedure.
7.3 Green indicator lights
When the rotation control button (4) is pressed down, the battery level is shown by the charge
level indicator (2). 1 green LED light when the level is low, 2 for half level and 3 LED lights for
full level.
7.4 LED work light (Fig. 3)
▪Switch on the LED work light (5), press the LED light button (6).
▪Press the LED light button (6) again to switch it off.
7.5 Forward / reverse rotation control (Fig. 4)
Change the rotational direction from forward to reverse by pressing the forward (F) / reverse
(R) rotation control button (4).
WARNING! Only change the rotational direction when the product is
switched off and has come to a complete stop! Always ensure that the

POWX00416 EN
Copyright © 2022 VARO P a g e | 6www.varo.com
forward / reverse rotation control is adjusted to the correct position
depending on the intended operation!
7.6 Screwdriving
▪Pre-drill the holes with a smaller diameter of the screw to be screwed.
▪Hold the product perpendicular to the screw to be screwed in/out. Holding it at an angle
may cause slipping or jamming of the driver bit.
▪Place the tip of the driver bit directly on the screw first and then switch the product on.
▪Only apply as much pressure as necessary to keep the screw in place and the driver bit in
contact with the screw head. Too much pressure will cause damage to the screw head
and driver bit, too little pressure will cause the driver bit to slide away.
▪Remove blocked and stuck screws by changing the rotational direction.
8 CLEANING AND MAINTENANCE
8.1 Cleaning
▪Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪Regularly clean the machine housing with a soft cloth, preferably after each use.
▪Keep the ventilation slots free from dust and dirt.
▪If the dirt does not come off use a soft cloth moistened with soapy water.
▪Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
8.2 Maintenance
Attention! Always switch off the screwdriver and lock the switch in the OFF position before
carrying out any work on the machine.
9 TECHNICAL DETAILS
Model no.
POWX00416
Rated voltage
4 V
No-load speed
135 rpm
Battery capacity
320 mAh
Charging time
2 hours
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
69 dB(A)
Acoustic power level LwA
80 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
aw (Vibration)
1,1 m/s²
K =1.5 m/s²
11 WARRANTY
▪This product is warranted for a 36-month period effective from the date of purchase by the
first user.
▪This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation

POWX00416 EN
Copyright © 2022 VARO P a g e | 7www.varo.com
▪Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
▪We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
▪Repairs may only be carried out by an authorized customer service centre for Powerplus
tools.
▪You can always obtain more information at the number 00 32 3 292 92 90.
▪Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
▪At the same time, no claim can be made on the warranty if the damage of the device is
the result of negligent maintenance or overload.
▪Definitely excluded from the warranty is damage resulting from fluid permeation,
excessive dust penetration, intentional damage (on purpose or by gross carelessness),
inappropriate usage (use for purposes for which the device is not suitable), incompetent
usage (e.g. not following the instructions given in the manual), inexpert assembly,
lightning strike, erroneous net voltage. This list is not exhaustive.
▪Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
▪Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
▪We reserve the right to reject a claim whenever the purchase cannot be verified or when
it is clear that the product has not been properly maintained. (Clean ventilation slots,
carbon brushes serviced regularly, etc.).
▪Your purchase receipt must be kept as proof of date of purchase.
▪Your appliance must be returned undismantled to your dealer in an acceptably clean
state, (in its original blow-molded case if applicable to the unit), accompanied by proof of
purchase.
12 ENVIRONMENT
Should your appliance need replacement after extended use, do not dispose of it
with the household refuse, but in an environmentally safe way.
Waste produced by electrical machine items should not be handled like normal
household rubbish. Please recycle where recycle facilities exist. Check with your
Local Authority or retailer for recycling advice.

POWX00416 EN
Copyright © 2022 VARO P a g e | 8www.varo.com
13 DECLARATION OF CONFORMITY
VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that,
Product: Screw driver 4 V
Trade mark: POWERplus
Model: POWX00416
is in conformity with the essential requirements and other relevant provisions of the applicable
European Directives, based on the application of European harmonized standards. Any
unauthorized modification of the apparatus voids this declaration.
European Directives (including, if applicable, their amendments up to the date of signature):
2011/65/EU
2006/42/EC
2014/30/EU
European harmonized standards (including, if applicable, their amendments up to the date of
signature):
EN62841-1 : 2015
EN62841-2-2 : 2014
EN55014-1 : 2017
EN55014-2 : 2015
Keeper of the Technical Documentation: Philippe Vankerkhove, VARO –Vic. Van Rompuy
N.V.
The undersigned acts on behalf of the company CEO,
Philippe Vankerkhove, MSc.EE.
Regulatory Affairs –Compliance Manager
15/10/2021, Lier - Belgium