Varytec LED Quadscan 4x10W User manual

User manual
LED Quadscan 4x10W

2 / 7
Table of contents
1. Safety instructions............................................................................................................................ 3
1.1. FOR SAFE AND EFFICIENT OPERATION............................................................................ 3
2. Advantages ...................................................................................................................................... 4
3. Operating.......................................................................................................................................... 4
3.1. Display..................................................................................................................................... 4
4. DMX Chart........................................................................................................................................ 5
5. Technical Data ................................................................................................................................. 7

3 / 7
1. Safety instructions
•This device is suitable for indoor use only.
•All modifications to the device will void the warranty.
•Repairs are to carry out by skilled personnel only.
•Use only fuses of the same type and original parts as spare parts.
•Protect the unit from rain and humidity to avoid fire and electric shocks.
•Make sure to unplug the power supply before opening the housing.
1.1.FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the device for an extended period of time, be sure to
disconnect the plug from the receptacle
.

4 / 7
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.
2. Advantages
- Including 4 exchangeable gobos
- Automatic mode
- Dmx mode
- Sound to light mode
- Master slave mode
- Impressing pre-programmed programs
- Bracket and safety included
3. Operating
3.1.Display
display
Mode
Function
ADDR
DMX address setting A001-A512
CHND
Channel mode 9CH/12CH
SLND
Slave mode Master (MAST)
Slave 1 (SL1)
Slave 2(SL2)
SOUN
Sound mode Sound on/off
SENE
Sound sense Sound sense 0-100
BLND
Black out mode LED mode, YES – NO
DISP
Display inversion Display Inversion,Idsp-dspI
TEST
Test mode Self test
Hour
Using time of light Fixture hours,0 ~ 9999
Note:1, To the function mode you need, press Enter to confirm, press MODE about two
seconds to quit. 2, The equipment can accpet DMX signal whenever Auto or sound active
mode, DMX is preferential.
2,DMX operation

5 / 7
4. DMX Chart
9 Channel mode:
CH1 0-7 Black out
8-200 Dimmer
201-247 Strobe
248-255 Full bright
CH2 1-255 RGBW color mixation
CH3 0-255 X-axis motor
CH4 0-255 Y-axis Motor
CH5 0-7 Black out
8-255 Led lamp run effect
CH6 0-255 Led lamp run effect speed
CH7 0-7 Black out
8-255 Motor run
CH8 0-255 Motor run speed
CH9 0-127 Sound off
128-255 Sound on

6 / 7
12 channel Mode:
CH1 0-7 Black out
The
first
head
color
mix
8-24 Red
25-41 Green
42-57 Blue
58-74 White
75-90 Red Green
91-107 Red Blue
108-123 Red White
124-140 Green Blue
141-156 Green White
157-173 Blue White
174-189 Red Blue Green
190-206 Blue Green White
207-222 Red Blue White
223-239 Red Green White
240-255 Red Green Blue White
CH2 0-255 The first X-axis motor
CH3 0-255 The first Y-axis motor
CH4 0-7 Black out
8-255 The second head light Color mix(same as CH1,
but for the second head)
CH5 0-255 The second X-axis motor
CH6 0-255 The second Y-axis motor
CH7 0-7 Black out
8-255 The Third head light Color mix(same as CH1, but
for the third head)
CH8 0-255 The Third X-axis motor
CH9 0-255 The Third Y-axis motor
CH10 0-7 Black out
8-255 The fourth head light Color mix(same as CH1, but
for the fourth head)
CH11 0-255 The fourth X-axis motor
CH12 0-255 The fourth Y-axis motor

7 / 7
5. Technical Data
Power supply AC 100 – 240 V 50/60Hz
Power consumption 100W
Lightsource 4 x 12W RGBW Cree LEDs
Gobo measurements 20,5mm / 12mm visible
DMX 9 or 12 channels
Measures 55 x 38 x 18,5
Weight 6,3kg
Importer:
B & K Braun GmbH
Industriestraße 2
D-76307 Karlsbad
www.bkbraun.com
[e-mail]