Varytec LED Street Bar 16x3W RGB IP65 User manual

LED Street Bar 16x3W RGB IP65
User manual

2 / 9
Index
1. Safety Information............................................................................................................................ 3
1.1. Hints for safe and faultless use ...............................................................................................3
2. Unpacking ........................................................................................................................................ 4
3. Introduction....................................................................................................................................... 4
4. Features ........................................................................................................................................... 4
5. Cleaning ........................................................................................................................................... 4
6. Menu................................................................................................................................................. 5
7. DMX control mode............................................................................................................................ 6
8. DMX channel and function............................................................................................................... 7

3 / 9
1. Safety Information
•The warranty expires in case of manual changes at the device by the user.
•The device may only be repaired by professionals.
•Only use fuses of the same type as the original and only use original spare
parts.
•To prevent fire and electric shock, protect the device against rain and
humidity
•Disconnect main power plug before opening the casing.
1.1.Hints for safe and faultless use
Care of heat and high temperatures!
Place the device where it is not exposed to extreme temperatures, humidity or dust. Only use the
device in ambient temperature between 5°C (41°F) - 35°C (95°F). Protect the device against sunlight
and sources of heat.
Only place the device on solid surfaces!
Place the device on solid surfaces, to avoid vibrations.
Do not use chemical cleaners!
Metal parts can be cleaned with a moist cloth. Before cleaning the device, always pull out the mains
power plug!
If the device does not work correctly!
The user should not try, to maintain the device autonomously. All repairs and service should be
realized by a qualified technician.
Handle the mains cable with care!
Never pull at the mains cable to disconnect the device! If the device is not used for a long time period,
pull the plug of mains cable out of the socket.
Attention!
The warranty claim expires, when damages are caused by disregarding this user manual. The
manufacturer and importer do not assume liability for consequential damages at all. Only qualified and
trained technicians are allowed to work at electric parts of the device. All electrical and mechanical
connections have to be mounted according to the European safety standards.

4 / 9
2. Unpacking
Thank you for purchasing the LED Street Bar 16x3W RGB IP65. Every LED Street Bar 16x3W RGB
IP65 has been thoroughly tested and has been shipped in perfect operating condition. Carefully check
the shipping carton for damage that may have occurred during shipping. If the carton appears to be
damaged, carefully inspect your fixture for any damage and be sure all accessories necessary to
operate the unit has arrived intact. In case of damage or parts are missing, please contact our toll free
customer support number for further instructions.
PLEASE recycle the carton whenever possible .
3. Introduction
The LED Street Bar 16x3W RGB IP65 is a DMX intelligent LED color washlight. This wash can be
used in a standalone mode or connected in a Master/Slave configuration. The unit can also be
controlled via DMX controller. This unit has seven operating modes: Manual Color mode, Color
Change mode, Color Fade mode, Auto mode, RGB Manual Control mode and DMX control mode.
4. Features
•DMX-512 protocol
•Waterproof rating: IP 65
•3 built-in programs
•Radiator air valve on the rear
•Electronic, flicker-free dimming: 0-100%
•6 DMX channel-modes: 3, 7, 10, 16, 24, 28 CH
5. Cleaning
Due to fog residue, smoke, and dust cleaning the internal and external optical lenses must be carried
out periodically to optimize light output.
Use normal glass cleaner and a soft cloth to wipe down the outside casing.
Clean the external optics with glass cleaner and a soft cloth every 20 days.
Always be sure to dry all parts completely before plugging the unit back in.
Cleaning frequency depends on the environment in which the fixture operates (i.e. smoke, fog residue,
dust, dew).

5 / 9
6. Menu
The LED Street Bar 16x3W RGB IP65 comes with
an easy to navigate system menu. This next section
will detail the functions of each command in the
system menu. Please read the next section
thoroughly!
To access the main menu press the ESC button. Tap
the UP or DOWN buttons until you reach function you
wish to change. When you reach the function you
wish to change press the ENTER button. When a
function is selected, use the UP or Down buttons to
change the function settings. Once your changes are
made press the ENTER button,
Addr - DMX Address setting via control board
1. Tap the ESC button and UP button or DOWN
button until “Addr” is displayed, press ENTER.
2. “Axxx” will now be displayed; “x” represents the
displayed address. Press the UP or DOWN buttons to
find your desired address.
Chnd - This lets you select your desired DMX
Channel mode.
1. Tap the ESC button and UP button or DOWN
button until “Chnd” is displayed, press ENTER.
2. “X Ch” will now be displayed, “X” represents the
displayed DMX channel mode. Press the UP or
DOWN buttons to find your desired Channel mode.
Auto – This lets you select your desired auto mode
1. Tap the ESC button and UP button or DOWN
button until “Auto” is displayed, press ENTER.
2. “Autx” will now be displayed. You can confirm three
modes by UP or DOWN for auto mode.

6 / 9
Colo – Manual color dimming mode
1. Tap the ESC button and UP button or DOWN button until “CoLo” is displayed, press ENTER.
2. “CoLX” will now be displayed, “X” represents a number between 0-9. Press the UP or DOWN
buttons to select either a static color mode.
3. Press UP and DOWN Button until “ATF” is displayed, now the fixture is under the manual color
dimming mode. Press ENTER to display “red” ”green” ”blue” and then press ENTER again, it will
display “rXXX” ”GXXX” “bXXX”, XXX represents the value of Red, Green, or blue. Press the UP or
DOWN to set up the value.
SLav- This menu will let you select your desired Master/slave mode
1. Tap the MENU button until “SLav” is displayed, press ENTER.
2. “Sla ” will now be displayed, Slave mode is confirmed. It will be slaved by auto mode.
VER - This will display the software version
1. Tap the MENU button until “VER” is displayed. Press the ENTER button and the software version
will be displayed.
2. Press the MENU button to leave this function.
Pasd - With this function you can activate or deactivate the display buttons.
1. Tap the MENU button until “Pasd” is displayed. Press the ENTER button to choose ON or OFF
.
2. Deactivate the display buttons.
Tap any button till is displayed.
Now tap „UP“, „DOWN“, „UP“, „DOWN“ ,“ENTER“ to get into the main menu.
7. DMX control mode
Universal DMX Control: This function allows you to use a universal DMX-512 controller for
controlling the LED Street Bar 16x3W RGB IP65. A DMX controller allows you to create unique
programs tailored to your individual needs.
1. The LED Street Bar 16x3W RGB IP65 uses six DMX channel modes. See next page for detailed
description of the DMX traits.
2. This will allow you to create your own programs.

7 / 9
8. DMX channel and function
3CH 7CH 10CH 16CH 24CH 28CH FUNCTION
1 5 5 5 1 5 R
2 6 6 6 2 6 G
3 7 7 7 3 7 B
8 8 4 8 R
9 9 5 9 G
10 10 6 10 B
11 7 11 R
12 8 12 G
13 9 13 B
14 10 14 R
15 11 15 G
16 12 16 B
. . . . . . . . .
22 26 R
23 27 G
24 28 B
1 1 1 1 DIMMING
2 2 2 2 LED main
function
3 3 3 3 SPEED
4 4 4 4 Strobo

8 / 9
DMX value and function
DIMMING 0<-------------------------------------------->255
0%<------------------------------------------->100%
LED main
function 0~9：dimmer
10~19
strobing
20~29
mode1
30~39:
mode2 ……
210~219
mode20
220~229
auto 1
230~239
auto 2
240~255
auto 3
function speed
0<-------------------------------------------->255
slow<------------------------------------------->fast
strobo 0:NO strobing 1~255: slow<------------------------------------------->fast

9 / 9
Importeur:
B & K Braun GmbH
Industriestraße 2
D-76307 Karlsbad
www.bkbraun.com
[e-mail]