Varytec LPS 20 User manual

User manual
LPS 20

2 / 6
Table of contents
1. Safety instructions............................................................................................................................ 3
1.1. FOR SAFE AND EFFICIENT OPERATION............................................................................ 3
2. Technical Data ................................................................................................................................. 4
3. Pros.................................................................................................................................................. 4
4. Scope of delivery.............................................................................................................................. 4
5. Warnings .......................................................................................................................................... 5
6. Turning on the device....................................................................................................................... 5

3 / 6
1. Safety instructions
This device is suitable for indoor use only.
All modifications to the device will void the warranty.
Repairs are to carry out by skilled personnel only.
Use only fuses of the same type and original parts as spare parts.
Protect the unit from rain and humidity to avoid fire and electric shocks.
Make sure to unplug the power supply before opening the housing.
1.1.FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 86°F /30°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the device for an extended period of time, be sure to
disconnect the plug from the receptacle.

4 / 6
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.
2. Technical Data
Voltage
AC 240V / 50Hz
Lamp
5W High Power LED Lamp
Colour
Cold white
Beam angle
10 degrees
Power
5W
Measures (L x W x H)
195 x 123 x 123 mm
Weight
0.5 Kg
3. Pros
This device complies to the CE standard
Very compact and nevertheless very bright LED white output
Perfect substitute for customary 30W pin spots
Based on 5W white light LED technology:
oVery low power consumption
oHigh colour temperature for impressive results
oNo lamp change necessary
oVery long life span
oAlmost no heat production
oLow in weight
4. Scope of delivery
LPS 20
User Manual

5 / 6
5. Warnings
To minimize the risk of an electric shock do not open the cover of the
housing. There are no parts to clean inside.
This sign is to call the attention of the user and warn him of an electric shock. At this point or
inside the housing are not insulated, current-carrying parts!
This sign reminds the user of the procedure described in this manual to clean the device.
This symbol means: Not appropriate for outdoors. Only use it indoors!
This symbol means: Please read the manual!
This symbol means: Compliant with Protection Class I.
This symbol shows the minimum distance between the spot and other objects. The minimum
distance between the source of light and objects should be at least 0.5m.
This sign means that the device may be placed on normal flammable surfaces, for example
wood or wood containing materials which are thicker than 2mm.
6. Turning on the device
As soon as the device is connected to the mains it illuminates.
Do not turn the device on and off in short time periods, this decreases the life span.

6 / 6
Importer:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
[email protected]om