Varytec LED PAD 5 Fourty User manual

Manual
LED PAD 5 Fourty
5x8W 4in1 RGBW

2 / 12
Table of contents
1. Safety instructions............................................................................................................................ 3
1.1. FOR SAFE AND EFFICIENT OPERATION............................................................................ 3
1.2. Additional Information for safety.............................................................................................. 4
2. Statement......................................................................................................................................... 5
2.1. Product description.................................................................................................................. 5
2.2. Introduction to the product....................................................................................................... 5
2.2.1. Product overview............................................................................................................. 5
2.2.2. Technical Data................................................................................................................. 5
3. Control.............................................................................................................................................. 7
3.1. Description of the display section............................................................................................7
3.1.1. Structure of the menu...................................................................................................... 7
3.2. DMX Chart............................................................................................................................... 7
4. IR remote.......................................................................................................................................... 9

3 / 12
1. Safety instructions
•This device is suitable for indoor use (not outdoors) only.
•All modifications to the device will void the warranty.
•Repairs are to carry out by skilled personnel only.
•Use only fuses of the same type and original parts as spare parts.
•Protect the unit from rain and humidity to avoid fire and electric shocks.
•Make sure to unplug the power supply before opening the housing.
1.1.FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperature
Avoid exposing it to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 32°F /0°C, or exceeding 104°F /40°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure to hold the plug.
When not using the device for an extended period of time, be sure to disconnect the plug
from the receptacle
.

Important:
Damages caused by the disregard of this user manual are not subject to
warranty. The dealer wil
l not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
connections have to be carried out according to the European safety standards.
1.2.Additional
Information for safety
Exessive temperature
Ta=40°C
Please do not use the device if the temperature exceeds 40°C/104°F.
Drop safety
If you install the device the mounting bracket has the ability to carry the tenfold
load of the weight of the device.
device additional. While working at the device the place below has to be vacated
Beware of electrical shock
Make sure the electrical connection is carried out by qualified personnel.
you plug in the device make sure that the power supply system has the right
voltage and also a crowbar. Every device has to be grounded.
supply
if you want to change a lamp or you have to open the device. You also have
to accomplis
h this action if there is a thunderstorm or high humidity.
Fire risk
Make sure that the fuse functioned. It is never allowed to bridge it.
exchange it only use fuses of the same type.
It is not allowed cover fans and
Make sure that there is a distance between the device and all objects in a
0.5m.
Don’t p
ut or mount anything on the lens.
4 / 12
Damages caused by the disregard of this user manual are not subject to
l not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
connections have to be carried out according to the European safety standards.
Information for safety
Exessive temperature
Please do not use the device if the temperature exceeds 40°C/104°F.
If you install the device the mounting bracket has the ability to carry the tenfold
load of the weight of the device.
Always u
se a corresponding safety to safe the
device additional. While working at the device the place below has to be vacated
Beware of electrical shock
Make sure the electrical connection is carried out by qualified personnel.
you plug in the device make sure that the power supply system has the right
voltage and also a crowbar. Every device has to be grounded.
if you want to change a lamp or you have to open the device. You also have
h this action if there is a thunderstorm or high humidity.
Make sure that the fuse functioned. It is never allowed to bridge it.
exchange it only use fuses of the same type.
It is not allowed cover fans and
air in and outlets.
Make sure that there is a distance between the device and all objects in a
ut or mount anything on the lens.
Damages caused by the disregard of this user manual are not subject to
l not accept liability for any resulting defects or problems. Make sure
the electrical connection is carried out by qualified personnel. All electrical and mechanical
connections have to be carried out according to the European safety standards.
Please do not use the device if the temperature exceeds 40°C/104°F.
If you install the device the mounting bracket has the ability to carry the tenfold
se a corresponding safety to safe the
device additional. While working at the device the place below has to be vacated
.
Make sure the electrical connection is carried out by qualified personnel.
Before
you plug in the device make sure that the power supply system has the right
voltage and also a crowbar. Every device has to be grounded.
Unplug the power
if you want to change a lamp or you have to open the device. You also have
h this action if there is a thunderstorm or high humidity.
Make sure that the fuse functioned. It is never allowed to bridge it.
If you have to
Make sure that there is a distance between the device and all objects in a
n area of

5 / 12
2. Statement
When we send out the goods, they are well packaged and also at best condition. Every product was
tested before delivery. If you recognize mistakes or damages please contact the delivery agent or the
supplier. Please read this manual faithful. In this manual you can find information about the handling
and the safety regulations of this product. If you disregard this manual we cannot give a warranty for it.
Technical changes, which are for progress, may be possible at any time. They are not mentioned
particularly in this manual, but affixed extra.
2.1.Product description
This product has one DMX mode. The fixture can operate in three different operating modes: DMX
control, sound-active or in Master/Slave configuration. The fixture comes with several built-in
programs that can be used, while operating as a dimmer unit or when used in multiples linked in a
Master/slave configuration .
2.2.Introduction to the product
2.2.1. Product overview
2.2.2. Technical Data
Power supply
Voltage
10
0V
-
240V / 50
-
60HZ
Max. Power
50W
Light source
Lamp type
5 pcs. 4 n1 LED
Wattage
8W
L fet me
80.000
-
100.000 h
Connections

6 / 12
Power
n
I
E
C
DMX
n/
out
XLR
Functions
D mmer
0
-
100%
Strobe
10 Flashed per second (any color)
Operation
Sound
-
to
-
l ght
yes
Automat c
yes
Master
-
Slave
yes
DMX
7 channels
Artnet
no
RDM
no
Hardware
Protect on class
IP
20
Sk ll
ndoor
We ght
1.5kg
Mater al
Plast c

7 / 12
3. Control
3.1.Description of the display section
To get to the menu you have to press MENU. With UP/DOWN you can scroll through the menu. If you
have reached the desired point of menu press ENTER. With UP/DOWN you can make your desired
settings. Conform your settings with ENTER.
3.1.1. Structure of the menu
Main Menu
Submenu 1
Submenu 2
Submenu 3
Function description
Addr A001-A512 Set the DMX address
SoUn SoUn1 Select the desired sound mode
SoUn2
Auto AUT1 SP 1-SP 9 Select the desired auto mode and
the speed of the auto mode
AUT2
CoLo
CoL1-CoL9 Select the desired preset color
AtF Red r000-r255 Dimmer red
GrEE g000-g255 Dimmer green
bLUE b000-b255 Dimmer blue
ÛhIE u000-u255 Dimmer white
SLAv SLA The device will act as slave
rEno ON/OFF Close/open IR remote control
Uer XXX Shows the software version
3.2.DMX Chart
Channel
Value
from
Value to
Function
1 0 255 Master dimmer 0-100%
2 0 255 Dimmer red 0-100%
3 0 255 Dimmer green 0-100%
4 0 255 Dimmer blue 0-100%
5 0 255 Dimmer white 0-100%
6 0 255 Adjust strobe if channel 6 is <16, adjust speed if channel 6 is
>95
7 0 15 Dimmer
16 31 Color mixing plus change 1

8 / 12
32 47 Color mixing plus change 2
48 63 Color mixing plus change 3
64 79 Color mixing plus change 4
80 95 Color mixing plus change 5
96 111 Color sync strobe
112 127 Color fade
128 143 Color sync
144 159 Color mixing & change then shutter closing
160 175 Down-dimming plus color change
176 191 Up-dimming plus color change
192 207 Color up-dimming then down-dimming
208 223 Color mix change
224 239 Sound mode 1
240 255 Sound mode 2

9 / 12
4. IR remote
Power On/Off
DMX button, to control DMX address when press this
button. It is channel mode when double click.
Master/Slave
Auto mode 1/2
Speed adjust
Sound mode 1/2
You can choose the desired program or number.
Strobe
You can use these
number buttons to
adjust number settings in any program mode.
Choose a color.

10 / 12

11 / 12

12 / 12
Importer:
B & K Braun GmbH
Industriestraße 2
D-76307 Karlsbad
www.bkbraun.com
[e-mail]