Varytec MINI LED SPOT User manual

User’s manual

2 / 6
Table of content
1. Safety instructions........................................................................................................................... 3
2. Package content............................................................................................................................. 4
3. Installation....................................................................................................................................... 4
4. Functions ........................................................................................................................................ 4
4.1. Setting up the Auto mode....................................................................................................... 4
4.2. Setting up the DMX mode...................................................................................................... 5
4.3. DMX channels........................................................................................................................ 5
5. Technical data................................................................................................................................. 5

3 / 6
1. Safety instructions
FOR SAFE AND EFFICIENT OPERATION
Be careful with heat and extreme temperatureAvoid exposing it
to direct rays of the sun or near a heating appliance.
Not put it in a temperature bellow 41°F /5°C, or exceeding 95°F /35°C.
Keep away from humidity, water and dust
Do not place the set in a location with high humidity or lots of dust.
Containers with water should not be placed on the set.
Keep away from sources of hum and noise
Such as transformer motor, tuner, TV set and amplifier.
To avoid placing on un-stable location
Select a level and stable location to avoid vibration.
Do not use chemicals or volatile liquids for cleaning
Use a clean dry cloth to wipe off the dust, or a wet soft cloth for stubborn dirt.
If out of work, contact sales agency immediately
Any troubles arose, remove the power plug soon, and contact with an engineer for repairing,
do not open the cabinet by yourself, it might result a
danger of electric shock.
Take care with the power cable
Never pull the power cable to remove the plug from the receptacle, be sure
to hold the plug. When not using the player for an extended period of time
be sure to disconnect the plug from the receptacle.

4 / 6
2. Package content
1 x Mini LED Spot
1 x manual
3. Installation
Mount the item and set the desired degree for the binder by using the screw on the side.
Connect the DMX Input of the Spot with the DMX Output of your DMX Controller by using a standard
XLR 3 Pin DMX Cable.
After that you can go on with connecting other DMX Fixtures with the spot.
4. Functions
1. Mains Power Connection
(AC220V-240V/50Hz~60Hz)
2. Fuseholder (5x20mmF0.5A)
3. Input DMX
4. Output DMX
5. DMX addressing
4.1. Setting up the Auto mode
ON OFF Function
1,2,3 4,5,6,7,8,9,10 Red light on
4,5,6 1,2,3,7,8,9,10 Green light on
7,8 1,2,3,4,5,6,9,10 Blue light on
7,9 1,2,3,4,5,6,8,10 7 color chase automatic
1,9 2,3,4,5,6,7,8,10 Strobe red green blue

5 / 6
4.2. Setting up the DMX mode
For the DMX addressing make sure that the channel 10 is on.
With all the other dipswitches you can set up your desired DMX address by using the binary system.
4.3. DMX channels
Channel 1 Dimmer Strobe
Channel 2 Red
Channel 3 Green
Channel 4 Blue
5. Technical data
Voltage 220V-240V 50Hz~60Hz
Power consumption 10W
Fuse 0,5A
For small Package For big package
Content 1 pcs Content 8 pcs
Measurements 19,5 x 14 x 14 Measurements 40 x 29 x 30
Weight 0,8kg Weight 6,5kg

6 / 6
Importeur:
B & K Braun GmbH
Industriestraße 1
D-76307 Karlsbad
www.bkbraun.com
[email protected]